Fracture toughness and shear yield stress determination from quasi-linear cutting tests of Scots pine (Pinus sylvestris L.) with a normalisation process by local density aided by X-ray computed tomography
Open Access
- 2 August 2025
- journal article
- research article
- Published by Springer Nature in European Journal of Wood and Wood Products
- Vol. 83 (4) , 1-11
Abstract
The Atkins model has been widely adopted for determining mechanical properties of wood, such as fracture toughness and shear yield stress, which are typically normalised by global density for cutting force and power predictions. This study explores the feasibility of determining these mechanical properties for knotty and clear Scots pine (Pinus sylvestris L.) using local densities revealed by X-ray computed tomography scanning. Six wood workpieces, three from Poland and three from Sweden, were scanned and subsequently cut on a custom single-tooth quasi-linear cutting machine. Cutting forces for both clear and knotty regions were recorded and normalised by local densities. Results indicate that clear Polish pine exhibits higher local-density-normalised fracture toughness and shear yield stress than Swedish pine, suggesting that wood origin influences mechanical properties beyond mere density differences. Knots display significantly lower local-density-normalised shear yield stress compared to clear wood, despite their higher density. The large variation in normalised fracture toughness observed in knots is attributed to differences in cutting direction relative to knot orientation. The study highlights the effectiveness of computed tomography scanning to provide detailed insights into wood density and structure, enabling more accurate normalization of cutting forces and enhancing the understanding of wood machinability across different origins and structural characteristics.Keywords
Funding Information
- Neptunium Enhancing Baltic Region Research Cooperation through “The Excellence Initiative − Research University” programme, Gdańsk University of Technology.” (DEC-1/2022/IDUB/II.2/Np)
- Centre of excellence at Luleå University of Technology (CT WOOD, CT WOOD)
- Kemper Foundation (Kempe Foundation)
This publication has 50 references indexed in Scilit:
- Analysis of the relationship between cutting forces and local structural properties of Scots pine wood aided by computed tomographyThe International Journal of Advanced Manufacturing Technology, 2024
- Minor cutting edge angles of sawing teeth: effect on cutting forces in woodEuropean Journal of Wood and Wood Products, 2022
- The role of lignin in wood working processes using elevated temperatures: an abbreviated literature surveyEuropean Journal of Wood and Wood Products, 2020
- Cutting model parameters from frame sawing of natural and impregnated Scots pine (Pinus sylvestris L.)European Journal of Wood and Wood Products, 2020
- Revisiting the estimation of cutting power with different energetic methods while sawing soft and hard woods on the circular sawing machine: a Central European caseWood Science and Technology, 2020
- Non-destructive detection of density and moisture content of heartwood and sapwood based on X-ray computed tomography (X-CT) technologyEuropean Journal of Wood and Wood Products, 2019
- The effect of tree age on the chemical composition of the wood of silver birch (Betula pendula Roth.) in PolandWood Science and Technology, 2019
- Application of fracture mechanics for energetic effects predictions while wood sawingWood Science and Technology, 2013
- Medical CAT-scanning: X-ray absorption coefficients, CT-numbers and their relation to wood densityWood Science and Technology, 1991
- Die Schnittkraft in der HolzbearbeitungEuropean Journal of Wood and Wood Products, 1952