Abstract
Electromagnetic micro actuators in microelectromechanical systems (MEMS) applications have an advantage for large displacement and quick actuation. However, most of the micro-actuator designs require permanent magnets or ferromagnetic cores to concentrate magnetic flux, which leads to complicated integration. To the best of our knowledge, this work presents the first experimental proof-of-concept demonstration of a coreless planar printed circuit board (PCB) coil actuator, which is capable of achieving lateral displacement of a ferromagnetic dipole made of nickel sheet using only magnetic field gradients generated by the coil, without any permanent magnets or ferromagnetic cores. This work is also significant as the concept is highly suitable for implementation in MEMS micro actuators fabricated using metal UV LIGA process. The work presents a 15-turn planar spiral coil fabricated on flame-retardant 4 (FR4) substrate using optimized ultraviolet (UV) lithography, showing a case of lateral micro-actuation. The work also focuses on optimizing the process to achieve track widths of ∼80 μm after resolving challenges of lateral etching and resolution limitations. Experimental testing with a Nickel dipole of dimensions approximately 13.5 × 1.5 × 0.02 mm with ∼12 mg weight demonstrated smooth and repeatable lateral displacement of ∼0.75 mm at 0.425 A DC drive current, closely matching the behavior that was predicted based on the magnetic profile that were obtained by simulations. The theoretical force analysis predicts magnetic forces of 1163.6 μN, which significantly exceeds the gravitational force (∼117.67 μN) and kinetic friction forces (41.185 μN), with experimental validation confirming consistent displacement performance across multiple trials. Compared with piezoelectric and electrostatic MEMS actuators, which achieve micrometer-scale motion, the proposed device demonstrates two orders of magnitude higher displacement.

This publication has 11 references indexed in Scilit: