Preparation and Performance Evaluation of a Core–Shell Nanosphere/Surfactant Composite System for Profile Control and Enhanced Oil Recovery in Low-Permeability Reservoirs
Open Access
Abstract
To address early water breakthrough and poor residual-oil mobilization in low-permeability reservoirs, a core–shell nanosphere/surfactant composite system was developed for profile control and enhanced oil recovery. The core–shell nanospheres were prepared by a semi-continuous seed-growth method, and a target particle-size window of 100–200 nm was selected based on pore-throat/particle matching. The representative sample, HK-0417, had an average particle size of about 120 nm and showed good dispersion stability in formation brine at 45 °C. After blending with the surfactant ALT-603, the system achieved an ultralow oil–water interfacial tension on the order of 10−3 mN/m and reduced the water contact angle of the oil-aged surface from 125° to 70°, indicating a shift toward near-neutral wettability. Core-flooding tests further showed that, under the same chemical dosage, slug injection (HK-0417 followed by ALT-603) demonstrated better performance than co-injection, with higher incremental oil recovery (15.49% vs. 13.17%) and higher plugging efficiency during subsequent water flooding (81.25% vs. 78.46%). The novelty of this work lies in integrating particle-size-window design, controllable preparation of core–shell nanospheres, and direct comparison of injection strategies within one system. The results provide practical guidance for formulation design and injection-mode selection for enhanced oil recovery in low-permeability reservoirs.Keywords
Funding Information
- Xi’an Natural Science Foundation (2025JH-ZRKX-0487)
This publication has 25 references indexed in Scilit:
- Recent Trends in Hybrid Biopolymer‐Nanoparticle Systems for Enhanced Oil RecoverySPE Polymers, 2025
- Applications of nanoparticle in enhanced oil recovery: A comprehensive review, history, and future prospectsThe Canadian Journal of Chemical Engineering, 2025
- Influence of salt-biosurfactant-biosynthesized silica nanoparticle on oil-water interfacial dynamicsFuel, 2025
- Development of fluids containing silicon dioxide extracted from Agro-Industry waste and tamarind gum for wettability alteration of carbonate rocksFuel, 2025
- A composite system of amphoteric copolymer nanosphere and betaine surfactant for enhanced oil recovery applicationColloids and Surfaces A: Physicochemical and Engineering Aspects, 2025
- Molecular Dynamics Simulation of Nanoparticle‐Driven Oil Detachment in NanochannelsChemistrySelect, 2025
- Applying membrane technology for preparing low salinity for hybrid nanofluid, surfactant, and alkaline enhanced oil recovery processFuel, 2025
- Optimizing nanoparticle selection for enhanced oil recovery in carbonate rock using hybrid low salinity water floodingJournal of Petroleum Exploration and Production Technology, 2025
- Synthesis and Evaluation of Mesoporous Silica Nanoparticle and its Application in Chemical Enhanced oil RecoveryChemistrySelect, 2023
- The effect of aluminosilicate in anionic–nonionic surfactant mixture on wetness and interfacial tension in its application for enhanced oil recoveryEnergy Reports, 2022