Weiliang Xiong
Weiliang Xiong has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Junhong Jia
Exploration and Development Research Institute of PetroChina Changqing Oilfield Company, Xi’an 710018, China
3 shared publications - Congbo Gou
Research Institute of Exploration and Development, Changqing Oilfield Company, Petro China, Xi’an 710021, China
2 shared publications - Changhua Yang
School of Petroleum Engineering, Xi’an Shiyou University, Xi’an 710065, China
1 shared publication - Chunning Gao
Research Institute of Exploration and Development, Changqing Oilfield Company, Petro China, Xi’an 710021, China
1 shared publication - Futeng Feng
School of Petroleum Engineering, Xi’an Shiyou University, Xi’an 710065, China
1 shared publication - Hailong Zhang
State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication
Latest Publications
- Open Access
Experimental Study on Oxygen-Reduced Air Foam Flooding in Ultra-Low-Permeability Reservoirs: From Sensitivity Analysis and Decomposition of Oil Recovery to Pore-Scale Seepage Mechanisms
Mature domestic continental low-permeability oil reservoirs in China have generally entered the ultra-high water-cut and high-recovery stage. Complex reservoir heterogeneity, development characteristics prone to gas channeling, and unclear seepage mechanisms of air foam flooding present engineering challenges to efficient development. To address these issues, this study investigates oxygen-reduced air foam flooding in the Chang-6 ultra-low-permeability sandstone reservoir in the WY block of Changqing Oilfield. The microscopic pore network was characterized using high-pressure mercury intrusion, BET (Brunauer-Emmett-Teller) nitrogen adsorption, and scanning electron microscopy. Changes in reservoir and fluid physicochemical characteristics before and after development were evaluated using the sessile drop method, pendant drop method, and Wilhelmy plate method. Core-flooding experiments were performed to confirm preferred key injection parameters, quantitatively decompose individual enhanced oil recovery mechanisms, and verify pore-scale seepage mechanisms via online nuclear magnetic resonance. The results reveal multi-scale pore network characteristics of the target reservoir and confirm the significant reduction in oil–water interfacial tension during foam flooding. Parameter sensitivity analysis identifies preferred operating conditions within the investigated experimental range, including an injection velocity of 0.2–0.3 mL/min, a foaming-agent concentration of 0.4–0.5%, a gas-to-liquid ratio of 2:1, and a 5-cycle slug schedule. Oil recovery decomposition analysis indicates that ultimate oil recovery comprises a relative share of 77.63% from baseline waterflooding, 13.44% from surfactant-assisted oil mobilization, 6.45% from gas assistance, and 2.48% from physical foam plugging. Furthermore, online nuclear magnetic resonance T2 (Transverse relaxation time) spectrum analysis reveals distinct permeability-dependent air foam flow regimes: as permeability decreases, flow behavior transitions from smooth foam propagation with concurrent oil washing and plugging, to the formation of dynamic foam plugging, and finally to severe shear-induced foam destruction in narrow throats that causes air foam flooding to fail. This study provides preferred injection parameters and theoretical grounds for mechanism decomposition in air foam enhanced oil recovery for ultra-low-permeability reservoirs, offering key insights into air foam seepage behavior.
Open AccessExperimental Study on Oxygen-Reduced Air Foam Flooding in Ultra-Low-Permeability Reservoirs: From Sensitivity Analysis and Decomposition of Oil Recovery to Pore-Scale Seepage Mechanisms
Mature domestic continental low-permeability oil reservoirs in China have generally entered the ultra-high water-cut and high-recovery stage. Complex reservoir heterogeneity, development characteristics prone to gas channeling, and unclear seepage mechanisms of air foam flooding present engineering challenges to efficient development. To address these issues, this study investigates oxygen-reduced air foam flooding in the Chang-6 ultra-low-permeability sandstone reservoir in the WY block of Changqing Oilfield. The microscopic pore network was characterized using high-pressure mercury intrusion, BET (Brunauer-Emmett-Teller) nitrogen adsorption, and scanning electron microscopy. Changes in reservoir and fluid physicochemical characteristics before and after development were evaluated using the sessile drop method, pendant drop method, and Wilhelmy plate method. Core-flooding experiments were performed to confirm preferred key injection parameters, quantitatively decompose individual enhanced oil recovery mechanisms, and verify pore-scale seepage mechanisms via online nuclear magnetic resonance. The results reveal multi-scale pore network characteristics of the target reservoir and confirm the significant reduction in oil–water interfacial tension during foam flooding. Parameter sensitivity analysis identifies preferred operating conditions within the investigated experimental range, including an injection velocity of 0.2–0.3 mL/min, a foaming-agent concentration of 0.4–0.5%, a gas-to-liquid ratio of 2:1, and a 5-cycle slug schedule. Oil recovery decomposition analysis indicates that ultimate oil recovery comprises a relative share of 77.63% from baseline waterflooding, 13.44% from surfactant-assisted oil mobilization, 6.45% from gas assistance, and 2.48% from physical foam plugging. Furthermore, online nuclear magnetic resonance T2 (Transverse relaxation time) spectrum analysis reveals distinct permeability-dependent air foam flow regimes: as permeability decreases, flow behavior transitions from smooth foam propagation with concurrent oil washing and plugging, to the formation of dynamic foam plugging, and finally to severe shear-induced foam destruction in narrow throats that causes air foam flooding to fail. This study provides preferred injection parameters and theoretical grounds for mechanism decomposition in air foam enhanced oil recovery for ultra-low-permeability reservoirs, offering key insights into air foam seepage behavior.
- Open Access
Preparation and Performance Evaluation of a Core–Shell Nanosphere/Surfactant Composite System for Profile Control and Enhanced Oil Recovery in Low-Permeability Reservoirs
To address early water breakthrough and poor residual-oil mobilization in low-permeability reservoirs, a core–shell nanosphere/surfactant composite system was developed for profile control and enhanced oil recovery. The core–shell nanospheres were prepared by a semi-continuous seed-growth method, and a target particle-size window of 100–200 nm was selected based on pore-throat/particle matching. The representative sample, HK-0417, had an average particle size of about 120 nm and showed good dispersion stability in formation brine at 45 °C. After blending with the surfactant ALT-603, the system achieved an ultralow oil–water interfacial tension on the order of 10−3 mN/m and reduced the water contact angle of the oil-aged surface from 125° to 70°, indicating a shift toward near-neutral wettability. Core-flooding tests further showed that, under the same chemical dosage, slug injection (HK-0417 followed by ALT-603) demonstrated better performance than co-injection, with higher incremental oil recovery (15.49% vs. 13.17%) and higher plugging efficiency during subsequent water flooding (81.25% vs. 78.46%). The novelty of this work lies in integrating particle-size-window design, controllable preparation of core–shell nanospheres, and direct comparison of injection strategies within one system. The results provide practical guidance for formulation design and injection-mode selection for enhanced oil recovery in low-permeability reservoirs.
Open AccessPreparation and Performance Evaluation of a Core–Shell Nanosphere/Surfactant Composite System for Profile Control and Enhanced Oil Recovery in Low-Permeability Reservoirs
To address early water breakthrough and poor residual-oil mobilization in low-permeability reservoirs, a core–shell nanosphere/surfactant composite system was developed for profile control and enhanced oil recovery. The core–shell nanospheres were prepared by a semi-continuous seed-growth method, and a target particle-size window of 100–200 nm was selected based on pore-throat/particle matching. The representative sample, HK-0417, had an average particle size of about 120 nm and showed good dispersion stability in formation brine at 45 °C. After blending with the surfactant ALT-603, the system achieved an ultralow oil–water interfacial tension on the order of 10−3 mN/m and reduced the water contact angle of the oil-aged surface from 125° to 70°, indicating a shift toward near-neutral wettability. Core-flooding tests further showed that, under the same chemical dosage, slug injection (HK-0417 followed by ALT-603) demonstrated better performance than co-injection, with higher incremental oil recovery (15.49% vs. 13.17%) and higher plugging efficiency during subsequent water flooding (81.25% vs. 78.46%). The novelty of this work lies in integrating particle-size-window design, controllable preparation of core–shell nanospheres, and direct comparison of injection strategies within one system. The results provide practical guidance for formulation design and injection-mode selection for enhanced oil recovery in low-permeability reservoirs.
- Open Access
- 29 September 2025
- Published by MDPI AG in Electronics
- Vol. 14 (19) , 3875
Transfer Learning-Enhanced N-BEATSx for Multivariate Forecasting of Tight Gas Well Production
Tight gas reservoirs present unique forecasting challenges due to steep decline rates, nonlinear production dynamics, and sensitivity to operational conditions. Conventional decline-curve methods and reservoir simulations are limited either by oversimplifying assumptions or by the need for extensive input data, although univariate deep learning models fail to fully capture external influences on well performance. To address these limitations, this study develops a transfer learning–enhanced N-BEATSx (Neural Basis Expansion Analysis Time Series with exogenous variables) framework for multivariate forecasting of tight gas well production. The model integrates exogenous variables, particularly casing pressure, with production histories to jointly represent reservoir behavior and operational effects. A pretraining dataset, comprising more than 100,000-day records from Block S of the Sulige Gas Field, was used to initialize the model, which was subsequently applied in a zero-shot setting to wells A1 and A2. Comparative analysis with the transfer learning-enhanced N-BEATS model demonstrates that N-BEATSx achieves consistently higher accuracy, with RMSE reductions of 23.9%, 39.1%, and 33.1% for Well A1 in short-, medium-, and long-term forecasts, respectively. These advances establish N-BEATSx as a robust tool for multivariate production forecasting, with direct industrial value in optimizing resource allocation, guiding development strategies, and enhancing operational decision-making in unconventional gas fields.
- 29 September 2025
- Published by MDPI AG in Electronics
- Vol. 14 (19) , 3875
Open AccessTransfer Learning-Enhanced N-BEATSx for Multivariate Forecasting of Tight Gas Well Production
Tight gas reservoirs present unique forecasting challenges due to steep decline rates, nonlinear production dynamics, and sensitivity to operational conditions. Conventional decline-curve methods and reservoir simulations are limited either by oversimplifying assumptions or by the need for extensive input data, although univariate deep learning models fail to fully capture external influences on well performance. To address these limitations, this study develops a transfer learning–enhanced N-BEATSx (Neural Basis Expansion Analysis Time Series with exogenous variables) framework for multivariate forecasting of tight gas well production. The model integrates exogenous variables, particularly casing pressure, with production histories to jointly represent reservoir behavior and operational effects. A pretraining dataset, comprising more than 100,000-day records from Block S of the Sulige Gas Field, was used to initialize the model, which was subsequently applied in a zero-shot setting to wells A1 and A2. Comparative analysis with the transfer learning-enhanced N-BEATS model demonstrates that N-BEATSx achieves consistently higher accuracy, with RMSE reductions of 23.9%, 39.1%, and 33.1% for Well A1 in short-, medium-, and long-term forecasts, respectively. These advances establish N-BEATSx as a robust tool for multivariate production forecasting, with direct industrial value in optimizing resource allocation, guiding development strategies, and enhancing operational decision-making in unconventional gas fields.
- Open Access
A Novel Method for the Calculation of Oil–Water Relative Permeability for Tight Oil Reservoirs by Considering Nonlinear Seepage Characteristics
In view of the lack of clear physical significance of the parameters of the traditional nonlinear seepage models and the difficulty of obtaining accurate experimental measurements of the two-phase relative permeability curve, a nonlinear seepage model of a tight reservoir is established on the basis of fractal theory and boundary layer theory. The results show that the proposed model can comprehensively reflect the effects of reservoir matrix physical properties, reservoir fluid physical properties, wettability, and displacement-pressure gradient on the single-phase and two-phase nonlinear seepage characteristics of tight reservoirs. Furthermore, the introduction of the permeability loss factor makes the two-phase relative permeability model more representative of the morphological characteristics of the actual relative permeability curve and avoids the disadvantage that the relative permeability at the end point of the wetting phase has in the traditional model. Finally, by taking the tight core of Changqing Oilfield as an example, a sensitivity analysis of the proposed model is conducted, which proves the practical application of this model. The proposed model provides a convenient theoretical method for the accurate characterization of nonlinear seepage characteristics of tight reservoirs and is of great significance to the numerical simulation, productivity evaluation, and optimization of tight reservoirs.
Open AccessA Novel Method for the Calculation of Oil–Water Relative Permeability for Tight Oil Reservoirs by Considering Nonlinear Seepage Characteristics
In view of the lack of clear physical significance of the parameters of the traditional nonlinear seepage models and the difficulty of obtaining accurate experimental measurements of the two-phase relative permeability curve, a nonlinear seepage model of a tight reservoir is established on the basis of fractal theory and boundary layer theory. The results show that the proposed model can comprehensively reflect the effects of reservoir matrix physical properties, reservoir fluid physical properties, wettability, and displacement-pressure gradient on the single-phase and two-phase nonlinear seepage characteristics of tight reservoirs. Furthermore, the introduction of the permeability loss factor makes the two-phase relative permeability model more representative of the morphological characteristics of the actual relative permeability curve and avoids the disadvantage that the relative permeability at the end point of the wetting phase has in the traditional model. Finally, by taking the tight core of Changqing Oilfield as an example, a sensitivity analysis of the proposed model is conducted, which proves the practical application of this model. The proposed model provides a convenient theoretical method for the accurate characterization of nonlinear seepage characteristics of tight reservoirs and is of great significance to the numerical simulation, productivity evaluation, and optimization of tight reservoirs.