Protection Scheme for Fast Detection and Interruption of High-Impedance Faults on Rate-Limited DC Distribution Networks
- 27 May 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 9 (3) , 2540-2549
Abstract
This paper presents a protection scheme for DC power distribution systems based on a unique rate-limited operating mode. The concept of this protection scheme is that extremely slow ramp-rate limits can be imposed on the DC network voltage and on all currents drawn from the network through control of the power electronic interfaces. Meanwhile, all fast transients produced by loads and DGs can be absorbed by local energy storage—typically a battery—behind the interface converter. The removal of all transients from the distribution network enables a very effective method to differentiate normal operation from fault conditions, including high-impedance faults such as vegetation faults and human-body faults. In the proposed scheme, the ramprates of the current and voltage on the network are sensed by each interfaced converter to check for compliance with the defined rate limits. It is unlikely that a given fault on the network will comply with the stringently slow rate limits, so this scheme allows the system to quickly detect the fault and deploy suitable protections. Experimental results show that the presented protection scheme is capable of detecting and interrupting a human-body-impedance fault quickly enough to prevent electrocution on a DC distribution cable operating at voltages of 1000 V and above, leading to unprecedented safety on a power distribution network of this voltage level.Keywords
Funding Information
- generous grant from Emera Technologies, Inc
This publication has 18 references indexed in Scilit:
- A novel fault location method and algorithm for DC distribution protection2016
- A Medium-Voltage Hybrid DC Circuit Breaker—Part II: Ultrafast Mechanical SwitchIEEE Journal of Emerging and Selected Topics in Power Electronics, 2016
- Electrical Fatalities Reported by Federal OSHA for Calendar Year 2014 With Consideration of Design InterventionsIEEE Transactions on Industry Applications, 2016
- A Non-unit Protection Scheme for DC Microgrid Based on Local MeasurementsIEEE Transactions on Power Delivery, 2016
- Detection of high-impedance fault in low-voltage DC distribution system via mathematical morphologyJournal of International Council on Electrical Engineering, 2016
- Modelling of high power mechanical DC circuit breaker2015
- A new protection scheme for DC microgrid using line current derivative2015
- 1MW bi-directional DC solid state circuit breaker based on air cooled reverse blocking-IGCT2015
- High-Impedance Fault Detection in the Distribution Network Using the Time-Frequency-Based AlgorithmIEEE Transactions on Power Delivery, 2014
- Approaches in High Impedance Fault Detection - A Chronological ReviewAdvances in Electrical and Computer Engineering, 2010