Influence of heating source position and dilution rate in achieving overmatched dissimilar welded joints
- 1 July 2010
- journal article
- research article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 15 (5) , 378-385
Abstract
The investigation addresses the overall performance of black and white joints (BWJ) of low carbon steel (LCS) and stainless steel thin sheets achieved by laser hybrid welding. Assuming that the structural integrity is directly influenced by the processing temperature, a thermal simulation of BWJ of thin sheets was developed. Afterwards, the base metals apportionment at joint formation, namely their distinct dilution rate, was originally estimated from the top surface temperature variation. Defect-free laser hybrid dissimilar welds were experimentally obtained using the selected filler metal and the energetic input from the process simulation, even for a critical analysed case of heat source displacement from the weld gap centreline towards LCS. Detailed macro and microstructural examination of the BWJ and related microhardness analysis results are presented. The tensile tests results indicate that in the case of transversally loaded BWJ, the positive difference in yield between the weld metal and the base materials protects the weld metal from being plastically deformed; the flat transverse tensile specimens loading up to failure reveals large strains in LCS, far away from the weld.Keywords
This publication has 13 references indexed in Scilit:
- Stainless steel weld metal designed to mitigate residual stressesScience and Technology of Welding and Joining, 2009
- Numerical simulation of heat transfer and fluid flow in GTA/Laser hybrid weldingScience and Technology of Welding and Joining, 2008
- High temperature thermal properties for metals used in LWR vesselsJournal of Nuclear Materials, 2008
- Pulsed Nd:YAG laser welding of AISI 304 to AISI 420 stainless steelsOptics and Lasers in Engineering, 2007
- Effects of welding speed, energy input and heat source distribution on temperature variations in butt joint weldingJournal of Materials Processing Technology, 2005
- Failure of weld joints between carbon steel pipe and 304 stainless steel elbowsEngineering Failure Analysis, 2005
- Modelling of transport phenomena in laser welding of dissimilar metalsInternational Journal of Numerical Methods for Heat & Fluid Flow, 2001
- Temperature distribution during multipass welding of platesInternational Journal of Pressure Vessels and Piping, 1998
- Feasibility of producing ferritic/austenitic dissimilar metal joints by high energy density laser beam processInternational Journal of Pressure Vessels and Piping, 1996
- A new finite element model for welding heat sourcesMetallurgical Transactions B, 1984