A Soft‐Switching Dual‐Channel LED Driver With Automatic Current Balance
- 26 January 2026
- journal article
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 54 (11) , 5388-5398
Abstract
This study proposes a soft‐switching dual‐channel LED driver with automatic current balance. To release the energy stored in the leakage inductor at the primary side of the transformer, a resonance effect is created through the clamp capacitor, resonant inductor, and the parasitic capacitors of the switches to achieve zero voltage switching (ZVS) turn‐on. This mechanism provides soft‐switching behavior similar to that of an active‐clamp flyback converter, thereby minimizing switching losses and reducing voltage spikes across the switches. On the second side of the transformer, a balancing capacitor is adopted to ensure that identical average currents pass through the two LED strings. The average current passing through the two LED strings can be regulated. Moreover, the complexity of the control loop is reduced and the power density of the circuit can be enhanced by using the capacitive balancing method. The experimental results, based on the laboratory prototypes, are presented to verify the circuit performance. According to these results, regardless of whether the two LED strings have the same or different numbers of LEDs, the current error rate between the strings remains below 1%. When the LED current reaches 350 mA, the peak efficiency of the overall circuit is up to 92.1%.Keywords
Funding Information
- National Science and Technology Council (NSTC 112‐2221‐E‐027‐019)
- National Science and Technology Council (NSTC 113‐2221‐E‐027‐087‐MY3)
This publication has 19 references indexed in Scilit:
- Independently Controllable Dual-Output Half-Bridge Series Resonant Converter for LED Driver ApplicationIEEE Journal of Emerging and Selected Topics in Power Electronics, 2021
- Input voltage controlled full‐bridge series resonant converter for LED driver applicationIET Power Electronics, 2020
- A buck‐boost integrated high gain non‐isolated half‐bridge series resonant converter for solar PV/battery fed multiple load LED lighting applicationsInternational Journal of Circuit Theory and Applications, 2019
- A three‐leg resonant converter for two output LED lighting application with independent controlInternational Journal of Circuit Theory and Applications, 2019
- Expandable two‐channel LED driver with galvanic isolation and automatic current balanceIET Power Electronics, 2018
- Current-Source-Mode Single-Inductor Multiple-Output LED Driver With Single Closed-Loop Control Achieving Independent Dimming FunctionIEEE Journal of Emerging and Selected Topics in Power Electronics, 2018
- Two-Input Floating Buck Converter With Variable OFF-Time Control Scheme for High-Efficiency and -Accuracy LED LightingIEEE Journal of Emerging and Selected Topics in Power Electronics, 2018
- Adaptive Driving Bus Voltage and Energy Recycling Control Schemes for Low-Power AC–DC RGB-LED DriversIEEE Transactions on Industrial Electronics, 2017
- Single-Switch Multichannel Current-Balancing LED Drive Circuits Based on Optimized SC TechniquesIEEE Transactions on Industrial Electronics, 2015
- A Capacitor-Isolated LED Driver With Inherent Current Balance CapabilityIEEE Transactions on Industrial Electronics, 2011