YHYing-Ting Huang

Ying-Ting Huang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ying-Ting Huang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ripple Reduction Without Current Sensing for AC‐DC Boost Converters

    by Ying‐Ting Huang, Guan‐Yu Chen

    This paper proposes a current sensorless ripple reduction control method for AC‐DC boost PFC converters operating in discontinuous conduction mode (DCM), aimed at enhancing power quality for sensor‐integrated systems. Conventional AC‐DC converters often rely on bulky electrolytic capacitors to suppress low‐frequency voltage ripple, which poses challenges in terms of size, cost, lifespan, and reliability. Existing methods to reduce ripple, such as auxiliary circuits or harmonic current injection, require additional components and sensing circuits, complicating implementation and increasing noise susceptibility. The proposed approach eliminates the need for current sensors and harmonic injection circuitry by dynamically adjusting the duty cycle based on input voltage and voltage feedback, thereby simplifying the control architecture and reducing hardware complexity. A Type‐III compensator is incorporated to improve dynamic performance and ensure fast transient response, which is especially critical for precision analog front‐ends and ADC stability in sensor‐based applications. Both simulation and experimental results confirm the effectiveness of the proposed method in minimizing DC‐link voltage ripple and maintaining stable power delivery, while significantly reducing the required capacitance. The results demonstrate the suitability for compact, high‐reliability power systems in sensing applications.

  • A Soft‐Switching Dual‐Channel LED Driver With Automatic Current Balance

    by Pang‐Jung Liu, Ting‐Yi Liao, Ying‐Ting Huang

    This study proposes a soft‐switching dual‐channel LED driver with automatic current balance. To release the energy stored in the leakage inductor at the primary side of the transformer, a resonance effect is created through the clamp capacitor, resonant inductor, and the parasitic capacitors of the switches to achieve zero voltage switching (ZVS) turn‐on. This mechanism provides soft‐switching behavior similar to that of an active‐clamp flyback converter, thereby minimizing switching losses and reducing voltage spikes across the switches. On the second side of the transformer, a balancing capacitor is adopted to ensure that identical average currents pass through the two LED strings. The average current passing through the two LED strings can be regulated. Moreover, the complexity of the control loop is reduced and the power density of the circuit can be enhanced by using the capacitive balancing method. The experimental results, based on the laboratory prototypes, are presented to verify the circuit performance. According to these results, regardless of whether the two LED strings have the same or different numbers of LEDs, the current error rate between the strings remains below 1%. When the LED current reaches 350 mA, the peak efficiency of the overall circuit is up to 92.1%.

  • Open Access

    A Load‐Current‐Based Closed‐Loop Dead‐Time Regulation Method for Phase‐Shifted Full‐Bridge Converters

    by Ying‐Ting Huang, Jun‐Cheng Lian, Cheng‐Tsu Yu

    Phase‐shifted full‐bridge (PSFB) converters are widely used in medium‐ and high‐power applications due to their zero‐voltage‐switching (ZVS) capability. Conventional fixed dead‐time designs ensure ZVS under light‐load conditions but cause excessive dead time and increased body‐diode conduction losses at medium and heavy loads. This paper proposes a load‐current‐based closed‐loop dead‐time regulation method for PSFB converters, in which the dead time is dynamically adjusted in real time according to the measured output current. By correlating the required dead time with the resonant current level, the proposed approach forms a discrete‐time feedback regulation loop that updates the dead time on a cycle‐by‐cycle basis, ensuring sufficient ZVS margin while minimising unnecessary diode conduction. The control strategy is implemented using a digital signal processor without additional ZVS detection circuits, resulting in a hardware‐efficient solution with low implementation complexity. A 1 kW PSFB converter prototype is built to validate the proposed method. Experimental results demonstrate a significant reduction in excess dead time and body‐diode conduction losses, achieving an efficiency improvement of up to 0.2% compared with conventional fixed dead‐time control over a wide load range.

  • Open Access

    Design of Type-III Compensator for Fast Dynamic Performance in Buck Converters

    by Ying-Ting Huang, Jun-Cheng Lian

    In today’s power electronic devices, power converters are widely applied in daily life, with increasing power demands. Consequently, the dynamic performance of power converters has become significant, as the compensators directly impact the system’s transient and dynamic response. This paper aims to design a type-III compensator for non-ideal buck converters to improve dynamic performance over a wide input voltage range. This paper introduces the non-ideal buck converter’s small signal model with state space averaging method, provides the guidelines for pole and zero positions of a type-III compensator using Matlab/Simulink Sisotool software, and presents simulation and experimental results to verify a design example and the performance and feasibility of the type-III compensator. Additionally, the transient and dynamic performance under different input voltages, load transients, and phase margins are compared with the K-factor and pole/zero compensation methods, providing a comprehensive reference when designing the compensator circuit for power converters. The results demonstrate that the designed type-III compensator effectively enhances stability and transient response, making it a valuable tool for engineers seeking to optimize power converter performance in various operational scenarios.


  • The DC-Link Voltage Double Line Frequency Ripple Reduction for AC-DC Converters

    by Ying-Ting Huang, Zhi-Jun Jiang, Guan-Yu Chen, Cheng-Yu Tang, Yaow-Ming Chen

    This paper proposes a control method of reducing the dc-link voltage double line frequency ripple in AC-DC converters. The proposed method utilizes variable duty cycle control, allowing for a reduction in the dc-link capacitance, thereby decreasing the size and cost of the converter. Additionally, the proposed control method eliminates the need for a current sensor, which is typically required in conventional harmonic input current injection techniques. This paper provides detailed mathematical analyses and design procedures for a boost PFC converter with the proposed control method. Furthermore, computer simulation and experimental results are included to validate the effectiveness and performance of the proposed control method.


  • A Feedforward Voltage Control Strategy for Reducing the Output Voltage Double-Line- Frequency Ripple in Single-Phase AC–DC Converters

    by Ying-Ting Huang, Ching-Chieh Yang, Tien-Sheng Li, Yaow-Ming Chen

    This article proposes a feedforward voltage control strategy (FVCS), aimed to reduce the output voltage double-line-frequency ripple and the output capacitance of the single-phase ac–dc power factor correction (PFC) converters. It is known that a large capacitance is required to reduce the voltage ripple but it results in low power density. With the proposed FVCS achieving low output voltage ripple, the output capacitance can be reduced, so the size and cost of the converter can also be reduced. Moreover, the proposed FVCS only needs one voltage sensor which can get rid of the necessary current sensor in the conventional harmonic input current injection technique. In this article, the detailed mathematical analyses, harmonic current limitations, and key parameters, $k$ and $N_{\Delta \text{ECo}}$ , of this proposed control strategy are derived. Also, the design procedures for a flyback converter are provided. Finally, computer simulations and experimental results of a 100-W prototype circuit are presented to verify the effectiveness and performance of the proposed FVCS.


  • Design Considerations of the Gate Drive Circuit for GaN HEMT Devices

    by Yuan-Chao Niu, Ying-Ting Huang, Chia-Lin Chen, Yaow-Ming Chen

    Comparing with the metal-oxide-semiconductor field-effect transistor (MOSFET), the switching frequency of the gallium nitride enhancement mode high electron mobility transistor (GaN E-HEMT) can be significantly increased. However, the impacts of parasitic inductance and capacitance to the circuit performance should be taken into account for design considerations. In this paper, the gate drive circuit design for GaN E-HEMT is described in detail. The effectiveness of the design considerations is fully examined by the simulation software, LTSPICE with GaN E-HEMT model introduced by Efficient Power Conversion (EPC). From the simulation results, the parasitic effects caused by the parasitic components can be clearly observed. Thus, the simulation results can provide the insight of practical design. Finally, a buck converter with 1 MHz switching frequency is built according to these design considerations.


  • A single-stage asymmetrical half-bridge AC/DC converter with coupled inductors

    by Chia-Hao Li, Ying-Ting Huang, Yaow-Ming Chen, Yung-Ping Tong

    This paper proposes a single-stage high-power-factor asymmetrical half-bridge AC-DC converter for power factor correction. The proposed converter is developed by integrating an asymmetrical half-bridge DC-DC converter with a set of coupled inductors and a blocking diode to achieve the single-stage AC-DC conversion with the buck-boost type power factor correction. By using the coupled inductors, the proposed converter can achieve near unity power factor and low total harmonic distortion without using extra switches and control circuits. Thus, the overall efficiency and power density of the AC-DC converter can be improved. The component counts and product cost can also be reduced. Moreover, the proposed converter can achieve zero-voltage switching for both power switches, so the switching loss can be reduced. Hence, the proposed converter has the advantages of near unity PF, low THD, zero-voltage switching, low product cost, and little component counts. A 100W experimental prototype circuit was built to verify the effectiveness of the proposed converter and the experimental results are presented in this paper. The proposed converter achieves a near unity power factor of 0.99 and low THD of 4.95% at 110Vrms line voltage.


  • Analysis and design of a single-stage buck-type AC-DC adaptor

    by Ying-Ting Huang, Chia-Hao Li, Yaow-Ming Chen, Yung-Ping Tong

    A modified asymmetrical half-bridge flyback converter (AHBFC) to fulfill the single-stage buck-type AC-DC adaptor for notebook application is proposed in this paper. The modified AHBFC is obtained from the integration of a buck converter and a conventional AHBFC. The modified AHBFC is operated in the discontinuous conduction mode to achieve the high input power factor to meet the required regulations. Also, the modified AHBFC can achieve the zero voltage switching (ZVS) for the switch and the zero current switching (ZCS) for the output diode to improve the efficiency. Moreover, the transformer's leakage inductor is utilized as the resonant inductor so the circuit structure is further simplified. The operation principles, important characteristics, and equation derivations of the proposed buck-type AC-DC adaptor are explained. A design example of a 100 W prototype is presented. Computer simulation and experimental results with universal input voltage ranges are obtained to verify the performance of the proposed buck-type AC-DC adopter.