Numerical and Optimization-Based Study on Split Hemispherical Shaped Fins for Augmenting Heat Transfer Rate
Open Access
- 3 February 2023
- journal article
- research article
- Published by Wiley in International Journal of Energy Research
- Vol. 2023, 1-20
Abstract
This paper deals with the numerical investigation of split hemispherical fins mounted staggered over a base plate. The thermal and flow analyses have been carried out to evaluate the Nusselt number (Nu), pressure drop , and hydrothermal performance factor (HTPF) with air as a medium and Reynolds number ( to 15000). The cylindrical fin (CF) and hemispherical fin (HF, of radius ) of the same volume and height have been formed and placed in the computational domain. Results reveal that the Nu for CF compared to HF is 1.3-1.4 times higher, with approximately 1.5 times higher for the given Re range. The value of HTPF for HF is greater than unity (/1.13-1.20) for all the considered Re values. Secondly, the HF gets split into longitudinal and transverse flow directions for better solid-fluid interaction. The geometrical parameters are transverse offset TO (/= ), longitudinal offset LO (/= ), and Re. Results show that the highest value of Nu (/=384.10) and HTPF (/=1.33) have been obtained at (at LO =0) and (at ) for the highest Re (/=15000). At last, the cuckoo search algorithm (CSA) coupled with the response surface method (RSM) has been performed to fetch the optimum value of Nu based upon dimensionless TO, dimensionless LO, and Re. The optimum value (obtained at , , and ) of Nu (=/392.16) from CSA is promising, with the numerically obtained Nu value (=/384.1059) with an error of 2.05%.Keywords
This publication has 32 references indexed in Scilit:
- Forced convective heat transfer enhancement with perforated pin finsHeat and Mass Transfer, 2013
- Investigation on flow and heat transfer characteristics in rectangular channel with drop-shaped pin finsPropulsion and Power Research, 2012
- Mathematical analysis for the efficiency of a semi-spherical fin with simultaneous heat and mass transferInternational Journal of Refrigeration, 2011
- Heat transfer and pressure drop correlations for compact heat exchangers with multi-region louver finsInternational Journal of Heat and Mass Transfer, 2010
- Numerical analysis of turbulent convection heat transfer from an array of perforated finsInternational Journal of Heat and Fluid Flow, 2009
- Investigation on heat transfer characteristics of tapered cylinder pin fin heat sinksEnergy Conversion and Management, 2007
- Performance comparison of pin fin in-duct flow arrays with various pin cross-sectionsApplied Thermal Engineering, 2006
- Forced convective heat transfer across a pin fin micro heat sinkInternational Journal of Heat and Mass Transfer, 2005
- Modeling of the thermal and hydraulic performance of plate fin, strip fin, and pin fin heat sinks-influence of flow bypassIEEE Transactions on Components and Packaging Technologies, 2001
- Convective Heat Transfer of Cubic Fin Arrays in a Narrow ChannelJournal of Turbomachinery, 1998