Abstract
The key difficulty for energy harvesting technique at passive Internet of Things (IoT) scenarios is that the operation and efficiency of a rectifier is limited by weak ambient signals. In this work, a method for improving the efficiency of a rectifier at low input power is formulated. Different from conventional methods, which seek optimal efficiency at the breakdown point of a Schottky diode, the proposed method tries to deal with the problems when input power and voltage hardly reaches the turn-on threshold condition of the diode. A simple and effective network composed of multi-stage microstrip lines is proposed for impedance matching. High reactance of the diode at low-power level is compensated, while a low insertion loss is maintained. Simultaneously, the voltage loaded on the diode is also boosted through the matching network, which helps to overcome the threshold voltage of the diode. The proposed method is found universal to various DC load values. For verification, two prototypes operating at 900 MHz with heavy/light DC load are implemented. The measured efficiency of the design with 5 kOhm load is higher than 20% and 30% at input power level -25 dBm and -20 dBm respectively. The rectifier can still maintain 10% efficiency at -30 dBm and successfully operate at -40 dBm with 3% efficiency.
Funding Information
  • National Natural Science Foundation of China (62271213)
  • Basic and Applied Basic Research Foundation of Guangdong Province (2023A1515012986)
  • Basic and Applied Basic Research Foundation of Guangdong Province (2023B1515130001)
  • Fundamental Research Funds for the Central Universities

This publication has 41 references indexed in Scilit: