PWPei Ming Wang

Pei Ming Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pei Ming Wang has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Simple, Low-Cost Simultaneous Wireless Information and Power Transmission Method Based on Radiation-Reshaped Antenna

    by Pei Ming Wang, Jun-Hui Ou, Shao Fei Bo, Jie Tang, Jingtao Zeng, Xiu Yin Zhang

    A simple simultaneous wireless information and power transmission (SWIPT) technique is proposed in this article. Different from conventional SWIPT methods, which need an extra control unit or circuit for separating information and power, the proposed one reallocates the transmitting power by employing a single antenna with reshaped far-field radiation. The antenna consists of a patch, a metal loop, and a parasitic patch, which are configured in a stacked structure. With proper excitation, hybrid reshaped radiation can be formed. The far-field radiation along the Z-axis is strengthened, which can be used for power transmission. The radiation in the XoY plane is also higher than that of a patch element, which is beneficial to information transmission. The less useful back-lobe radiation is suppressed to achieve a good front-to-back ratio. The mechanism of the antenna is studied, and a prototype is implemented. A demonstration system is finally built using a conventional Wi-Fi router, and the SWIPT strategy is validated. After the antenna replacement, energy transmission capability in the main lobe direction can be enhanced, and a low-power node can be driven successfully. Meanwhile, the communication function of the router can be maintained with lateral radiation, and the test signal can be received with a mobile phone.

  • A Simple Polarization-Diversity Demodulation System Design for Simultaneous Wireless Power and Information Transfer

    by Jun-Hui Ou, Yuxin Chen, Zhengda Chen, Zhi-Xia Du, Peiming Wang, Bo Zhang, Zhenwen Gui, Xiu Yin Zhang

    Conventional simultaneous wireless information and power transfer methods demodulate the received signal at RF frequency. This part of the RF power can no longer be rectified, which causes a power transfer efficiency deterioration. To overcome this problem, a simple systematic configuration is proposed in this article. The system consists of TX and RX parts. By mapping the communication symbol “1” and “0” into two orthogonal polarizations of the TX antenna, the information can be modulated through the switching between polarization. At RX side, a dual-polarized RX antenna delivers the power to a dual-branch rectifier. By sampling and comparing the output DC voltage of the two branches, the signal can be demodulated, and the power conversion efficiency (PCE) can be maintained high owing to the ultralow-power composition of the sampling components. In the measurement, 64.7% optimal PCE is found at 7 dBm, and a degradation of less than 1% in efficiency is found when receiving the modulated signal with 9600 bps baud rate. With a simple comparator, data rate can reach 2 Mb/s with a bit error rate (BER) of $2.4^{\ast } 10^{-3}$ . At the TX part, the switching loss brought by the modulation is found 0.5 dB. The whole system is concise and compact. The proposed design is a good candidate for applications that need highly efficient power transmission and reliable communication with lower data rate, such as Internet-of-Things systems.


  • A Method for Designing Efficient Rectifier With Schottky Diodes at Ultra-Low Input Power Level

    by Pei Ming Wang, Jun-Hui Ou, Shao Fei Bo, Huaiguang Jiang, Mo Huang, Xiu Yin Zhang

    The key difficulty for energy harvesting technique at passive Internet of Things (IoT) scenarios is that the operation and efficiency of a rectifier is limited by weak ambient signals. In this work, a method for improving the efficiency of a rectifier at low input power is formulated. Different from conventional methods, which seek optimal efficiency at the breakdown point of a Schottky diode, the proposed method tries to deal with the problems when input power and voltage hardly reaches the turn-on threshold condition of the diode. A simple and effective network composed of multi-stage microstrip lines is proposed for impedance matching. High reactance of the diode at low-power level is compensated, while a low insertion loss is maintained. Simultaneously, the voltage loaded on the diode is also boosted through the matching network, which helps to overcome the threshold voltage of the diode. The proposed method is found universal to various DC load values. For verification, two prototypes operating at 900 MHz with heavy/light DC load are implemented. The measured efficiency of the design with 5 kOhm load is higher than 20% and 30% at input power level -25 dBm and -20 dBm respectively. The rectifier can still maintain 10% efficiency at -30 dBm and successfully operate at -40 dBm with 3% efficiency.


  • High-Efficiency Wideband RF Rectifier With Enhanced Dynamic Power Range Based on Impedance Regulation Network

    by Pei Ming Wang, Shao Fei Bo, Jun-Hui Ou, Xiu Yin Zhang

    A high-efficiency rectifier designed to operate across a broad range of frequencies and power levels is proposed in this letter. The rectifier features a dual-branch impedance regulation network (IRN), two subrectifiers, and a load resistor. The IRN is used to construct specific impedance relationship between the upper and lower branches at different frequencies and power levels, demonstrating good matching performance across a wide bandwidth and dynamic power range (DPR). Theoretical analysis is carried out, and a prototype is implemented, fabricated, and measured for verification. At 1.8 GHz, the optimal efficiency is found over 70% at an input power level of 8 dBm. The frequency range of the prototype is from 1.4 to 2.5 GHz (beyond 70% of the optimal efficiency), and the calculated DPR of the prototype is 18 dB (from $-$ 5 to 13 dBm). The total size is 0.22 $\lambda_{\text{c}}$ $\times$ 0.24 $\lambda_{\text{c}}$ (at 2 GHz).