SBShao Fei Bo

Shao Fei Bo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shao Fei Bo has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Simple, Low-Cost Simultaneous Wireless Information and Power Transmission Method Based on Radiation-Reshaped Antenna

    by Pei Ming Wang, Jun-Hui Ou, Shao Fei Bo, Jie Tang, Jingtao Zeng, Xiu Yin Zhang

    A simple simultaneous wireless information and power transmission (SWIPT) technique is proposed in this article. Different from conventional SWIPT methods, which need an extra control unit or circuit for separating information and power, the proposed one reallocates the transmitting power by employing a single antenna with reshaped far-field radiation. The antenna consists of a patch, a metal loop, and a parasitic patch, which are configured in a stacked structure. With proper excitation, hybrid reshaped radiation can be formed. The far-field radiation along the Z-axis is strengthened, which can be used for power transmission. The radiation in the XoY plane is also higher than that of a patch element, which is beneficial to information transmission. The less useful back-lobe radiation is suppressed to achieve a good front-to-back ratio. The mechanism of the antenna is studied, and a prototype is implemented. A demonstration system is finally built using a conventional Wi-Fi router, and the SWIPT strategy is validated. After the antenna replacement, energy transmission capability in the main lobe direction can be enhanced, and a low-power node can be driven successfully. Meanwhile, the communication function of the router can be maintained with lateral radiation, and the test signal can be received with a mobile phone.

  • A Method for Designing Efficient Rectifier With Schottky Diodes at Ultra-Low Input Power Level

    by Pei Ming Wang, Jun-Hui Ou, Shao Fei Bo, Huaiguang Jiang, Mo Huang, Xiu Yin Zhang

    The key difficulty for energy harvesting technique at passive Internet of Things (IoT) scenarios is that the operation and efficiency of a rectifier is limited by weak ambient signals. In this work, a method for improving the efficiency of a rectifier at low input power is formulated. Different from conventional methods, which seek optimal efficiency at the breakdown point of a Schottky diode, the proposed method tries to deal with the problems when input power and voltage hardly reaches the turn-on threshold condition of the diode. A simple and effective network composed of multi-stage microstrip lines is proposed for impedance matching. High reactance of the diode at low-power level is compensated, while a low insertion loss is maintained. Simultaneously, the voltage loaded on the diode is also boosted through the matching network, which helps to overcome the threshold voltage of the diode. The proposed method is found universal to various DC load values. For verification, two prototypes operating at 900 MHz with heavy/light DC load are implemented. The measured efficiency of the design with 5 kOhm load is higher than 20% and 30% at input power level -25 dBm and -20 dBm respectively. The rectifier can still maintain 10% efficiency at -30 dBm and successfully operate at -40 dBm with 3% efficiency.


  • High-Efficiency Wideband RF Rectifier With Enhanced Dynamic Power Range Based on Impedance Regulation Network

    by Pei Ming Wang, Shao Fei Bo, Jun-Hui Ou, Xiu Yin Zhang

    A high-efficiency rectifier designed to operate across a broad range of frequencies and power levels is proposed in this letter. The rectifier features a dual-branch impedance regulation network (IRN), two subrectifiers, and a load resistor. The IRN is used to construct specific impedance relationship between the upper and lower branches at different frequencies and power levels, demonstrating good matching performance across a wide bandwidth and dynamic power range (DPR). Theoretical analysis is carried out, and a prototype is implemented, fabricated, and measured for verification. At 1.8 GHz, the optimal efficiency is found over 70% at an input power level of 8 dBm. The frequency range of the prototype is from 1.4 to 2.5 GHz (beyond 70% of the optimal efficiency), and the calculated DPR of the prototype is 18 dB (from $-$ 5 to 13 dBm). The total size is 0.22 $\lambda_{\text{c}}$ $\times$ 0.24 $\lambda_{\text{c}}$ (at 2 GHz).


  • Battery-Free Hybrid Ambient RF and Wind Energy Harvester for Outdoor IoTs

    by Shao Fei Bo, Jun-Hui Ou, Pei Ming Wang, Huaiguang Jiang, Xiu Yin Zhang

    The paper proposes a hybrid RF and wind energy harvester. It is constructed by structural and functional integration of the two dissimilar energy harvesting techniques, constituting a conformal design. The rectifying efficiency can be boosted by the hybrid power source excitation, thereby increasing DC output power compared to standalone power source. A fan-shaped omnidirectional antenna and a hybrid single shunt-diode rectifier are designed to realize energy receiving and rectifying, respectively. A prototype is implemented and measured. The receiving part can achieve 2.29-dBi peak gain and 0.92-dB non-roundness at 1.85 GHz. It can also work smoothly when the wind speed varies from 0 to 12 m/s. The RF-DC conversion efficiency at -20 dBm and AC-DC output voltage at 12 m/s are measured as 20% and 79 mV, respectively. When both RF and wind power sources are accessible, the hybrid DC output power of 1.0 uW can be obtained with -30-dBm RF power and 10m/s wind speed. Moreover, the output power at hybrid rectifying mode is higher than that of simply superimposed RF and wind energy. Efficiency gain of up to 182% can be achieved. The hybrid energy harvester is a good candidate to power the sensors in battery-free IoTs.


  • Low Sidelobe Level, High-Gain Patch Antennas Operating at Higher-Order Modes

    by Jun-Hui Ou, Jia Ying Zhong, Jianyu Lan, Xin Zheng, Shao Fei Bo, Xiu Yin Zhang

    High-gain patch antennas with low sidelobes are proposed in this article. First, the patch antennas are operating at higher-order modes to realize a larger electrical size and higher directivity. TM30 mode is selected for a rectangular patch, while TM21 mode is selected for a circular patch. Through the surface current distribution analysis, the sidelobe is found contributed by the opposite-oriented surface current. To reduce the sidelobe, one slit and two slots are introduced to the patch on the area with opposite-oriented current. Furthermore, two parasitic patches are introduced to the etched area of the patch. Current with the same orientation is excited through coupling, which helps to further enhance gain and reduce the sidelobe. For demonstration, the rectangular and circular patches are designed and fabricated. In the measurement, 11–12 dBi gain with sidelobe as low as −28 dBi at both E- and H-planes are found. The front-to-back ratio of both patches are found better than 30 dB in the measurements.


  • A Simple Technology for Designing Ultrawideband Rectifiers

    by Yu Yang Xiao, Jun-Hui Ou, Shao Fei Bo, Wenquan Che, Xiu Yin Zhang

    The key difficulty for designing a wideband rectifier is to match the impedance of rectifying diodes at wide frequency range. In conventional works, the circuit topology and matching network are carefully designed to realize bandwidth extension. However, the operating bandwidth is concurrently limited by the matching network, while the size of the rectifier is usually enlarged. In this work, a novel feature of Schottky diode is found that its impedance is naturally not sensitive to frequency varying. Making full use of this feature, a simple matching network is employed, and the bandwidth can still be ultrawide. Furthermore, the proposed design method is effective to various diode models, thus can be applied to design rectifiers for different applications. For verification, a prototype is implemented. The measured results show that the rectifier can maintain a power conversion efficiency beyond 50% at frequencies ranging from 0.1 to 4 GHz (the relative bandwidth reaches 190%). The total size can be as small as 1 $\times$ 1 cm $^{2}$ . The peak efficiency reaches up to 74.9%.


  • Multipath-Coupling-Based Filtenna for Base-Station Applications

    by Ji Wen Wang, Ruyu Ma, Shao Fei Bo, Huifen Huang, Xiu Yin Zhang

    In this study, a multipath-coupling based filtenna with enhanced stopbands is proposed for 5G base station applications. To simultaneously support multiple communication standards in a shared aperture, base station antennas need a wide stopband with high rejection to maintain sufficient isolation from other operating frequencies. However, this usually requires filtennas to be designed with multiple radiation nulls, which makes the filtennas difficult to match. Therefore, without an additional impedance-matching circuit, it is challenging to achieve a filtenna with sufficient impedance matching in the passband, wide stopband and high out-of-band rejection. To solve this problem, we propose a multipath-coupled filtenna with enhanced stopbands. The proposed filtenna consists of two stacked patch radiators connected by four metal strips, a crossed feeder and four hooked strips. The wide stopband was obtained by four radiation nulls introduced by these structures. To improve the impedance matching in the passband, four metal strips were used to connect the two stacked patches to tune the coupling between them. Finally, a prototype was fabricated and measured. The measurement results show that the proposed filtenna has a passband of 3.3–3.8 GHz with an average gain of 8.9 dBi and an upper stopband up to 7 GHz with an out-of-band suppression more than 19 dB. The proposed filtenna is a good candidate for 5G n78 band (3.3–3.8GHz) applications in base stations.


  • Ultrawideband Rectifier With Extended Dynamic-Power-Range Based on Wideband Impedance Compression Network

    by Shao Fei Bo, Jun-Hui Ou, Xiu Yin Zhang

    This article proposes an ultrawideband rectifier with high efficiency at wide input power range. It consists of a wideband impedance compression network (WICN) and two subrectifiers. The proposed impedance compression network (ICN) offers a more universal design method and higher design flexibility. Thus, the impedance variation of subrectifiers at wide input power range can be reduced at several frequencies. With proper setting of these frequencies, the rectifier can maintain stable, high efficiency at wideband, and wide input power range simultaneously. Besides, the proposed network can also realize impedance matching, hence saving extra matching components. The mechanism of the proposed rectifier is analyzed. For verification, a prototype is implemented and measured. The optimal efficiency of 72.2% is found at 6.5 dBm and 1.2 GHz. The prototype can maintain an efficiency beyond 70% of the peak value at frequencies ranging from 1.0 to 2.7 GHz. The relative bandwidth (91.9%) is so far the widest among the rectifiers with resistance compression networks (RCNs)/ICNs. At the operating band, the rectifier can maintain an efficiency beyond 70% of the peak at input power ranging from −6.2 to 13 dBm. The total size is as compact as $0.19\lambda \times 0.16\lambda $ at the central frequency.


  • All-Polarized Wideband Rectenna With Enhanced Efficiency Within Wide Input Power and Load Ranges

    by Shao Fei Bo, Jun-Hui Ou, Yazhou Dong, Shi-Wei Dong, Xiu Yin Zhang

    The efficiency of a rectenna varies under the influences of receiving polarization tilt angle, operating frequency, input power, and load value in different applications. Yet, no reported rectenna can realize stable efficiency when all these factors vary within a wide range. To solve this problem, an all-polarized rectenna is proposed in this article, composed of a dual-input rectifier and a dual-polarized (DP) antenna. By introducing a novel six-port coupler, the rectifier maintains stable efficiency at wideband, wide input power, and dc load ranges. Moreover, the efficiency of the rectifier keeps stable when the antenna receives power at different polarization tilt angles. Accordingly, a DP antenna with extended bandwidth and 3-dB beamwidth is implemented. Finally, the rectenna is formed. The prototype can maintain beyond 70% of the peak efficiency from 1.7 to 2.5 GHz. At a power density as low as 1 μ W/cm 2 , efficiency can reach 24.4%. Furtherly, the rectenna is demonstrated by forming a battery-less digital clock. The clock can be powered wirelessly by a WiFi router or cellular base station with maximum distances of 1 or 70 m respectively. Besides, the clock can successfully function under significant transmitting-direction deviation or polarization misalignment between the power source and the rectenna.


  • Polarization-Independent Rectifier With Wide Frequency and Input Power Ranges Based on Novel Six-Port Network

    by Shao Fei Bo, Jun-Hui Ou, Ji Wen Wang, Jie Tang, Xiu Yin Zhang

    The RF to dc conversion efficiency of a rectenna often varies dramatically with the operating frequency, input power, and polarization tilt angle. To stabilize the efficiency, this article presents a polarization-independent rectifier, which employs a novel six-port Lange-based coupler with a grounded isolation point, as well as four subrectifiers. By the adoption of the novel six-port Lange-based coupler, the rectifier not only achieves stable efficiency at varied polarization tilt angles, but also widens operating frequency and input power ranges. In this case, when developing a dual-polarized rectenna with such a rectifier, the rectenna can receive incident energy at any polarization tilt angles with stable efficiency. For verification, the mechanism of the proposed rectifier is analyzed and a prototype is implemented. Measured results show that the rectifier operates efficiently at a frequency band from 1 to 2.7 GHz and an input power range beyond 18.5 dB. Furthermore, when the polarization tilt angle varies from 0° to 90°, the rectifier can work stably.