A clinical solution for non‐toxic 3D‐printed photon blocks in external beam radiation therapy
Open Access
- 11 January 2024
- journal article
- research article
- Published by Wiley in Journal of Applied Clinical Medical Physics
- Vol. 25 (3) , e14225
Abstract
Purpose: A well‐known limitation of multi‐leaf collimators is that they cannot easily form island blocks. This can be important in mantle region therapy. Cerrobend photon blocks, currently used for supplementary shielding, are labor‐intensive and error‐prone. To address this, an innovative, non‐toxic, automatically manufactured photon block using 3D‐printing technology is proposed, offering a patient‐specific and accurate alternative.Methods and materials: The study investigates the development of patient‐specific photon shielding blocks using 3D‐printing for three different patient cases. A 3D‐printed photon block shell filled with tungsten ball bearings (BBs) was designed to have similar dosimetric properties to Cerrobend standards. The generation of the blocks was automated using the Eclipse Scripting API and Python. Quality assurance was performed by comparing the expected and actual weight of the tungsten BBs used for shielding. Dosimetric and field geometry comparisons were conducted between 3D‐printed and Cerrobend blocks, utilizing ionization chambers, imaging, and field geometry analysis.Results: The quality assurance assessment revealed a −1.3% average difference in the mass of tungsten ball bearings for different patients. Relative dose output measurements for three patient‐specific blocks in the blocked region agreed within 2% of each other. Against the Treatment Planning System (TPS), both 3D‐printed and Cerrobend blocks agreed within 2%. For each patient, 6 MV image profiles taken through the 3D‐printed and Cerrobend blocks agreed within 1% outside high gradient regions. Jaccard distance analysis of the MV images against the TPS planned images, found Cerrobend blocks to have 15.7% dissimilarity to the TPS, while that of the 3D‐printed blocks was 6.7%.Conclusions: This study validates a novel, efficient 3D‐printing method for photon block creation in clinical settings. Despite potential limitations, the benefits include reduced manual labor, automated processes, and greater precision. It holds potential for widespread adoption in radiation therapy, furthering non‐toxic radiation shielding.Keywords
This publication has 10 references indexed in Scilit:
- Nontoxic electron collimatorsJournal of Applied Clinical Medical Physics, 2021
- Three‐dimensional printing in radiation oncology: A systematic review of the literatureJournal of Applied Clinical Medical Physics, 2020
- Technology‐driven research for radiotherapy innovationMolecular Oncology, 2020
- Tungsten filled 3D printed field shaping devices for electron beam radiation therapyPLOS ONE, 2019
- A Systematic Review on 3D-Printed Imaging and Dosimetry Phantoms in Radiation TherapyTechnology in Cancer Research & Treatment, 2019
- Use of 3D printers to create a patient‐specific 3D bolus for external beam therapyJournal of Applied Clinical Medical Physics, 2015
- Potential of 3D printing technologies for fabrication of electron bolus and proton compensatorsJournal of Applied Clinical Medical Physics, 2015
- Basic Applications of Multileaf Collimators2001
- Is Random Close Packing of Spheres Well Defined?Physical Review Letters, 2000
- Density and Packing in an Aggregate of Mixed SpheresJournal of Applied Physics, 1949