Thermal Analysis of a Head-Only 1.5 T Magnetic Resonance Imaging Superconducting Magnet
- 16 November 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-6
Abstract
A 1.5 T head-only magnetic resonance imaging (MRI) superconducting magnet with liquid helium (LHe) bath-cooling using NbTi wire has been designed and is being constructed in Wuhan National High Magnetic Field Center (WHMFC). The magnet consists of 9 discretized coils, including five main coils and two bucking coils, wound on two separate stainless steel 304 formers. The magnet is designed to operate at 510 A with a peak field below 3.0 T, load line controlled below 50%, and temperature margin above 1 K. It is critical to accurately evaluate the thermal load of the superconducting magnet system to ensure its zero boil-off normal operation since LHe is very expensive and non-renewable. A detailed heat load model is presented in this paper. The heat load is evaluated by finite element analysis, theoretical formula calculation and empirical formula calculation, which fully considers conduction, radiation and convection. The results indicate that the total head load of the second stage is approximately 0.237 W and that of the first stage is about 20.26 W which is well below the cooling power of the SRDE-412D4 cryocooler used in the magnet system.Keywords
Funding Information
- National Natural Science Foundation of China (52293422, U21A20458, 51821005)
- National Key Research and Development Plan Project of China (2021YFA1600301)
This publication has 14 references indexed in Scilit:
- DTT Thermal Shield: Preliminary thermal analysisFusion Engineering and Design, 2020
- Repeatability of Cryogenic Multilayer InsulationIOP Conference Series: Materials Science and Engineering, 2017
- Initial optimization of DEMO fusion reactor thermal shields by thermal analysis of its integrated systemsFusion Engineering and Design, 2017
- Modeling Transmission Effects on Multilayer InsulationJournal of Thermal Science and Engineering Applications, 2015
- KSTAR thermal shieldFusion Engineering and Design, 2009
- Experience with silver coated vacuum vessel thermal shield at 80 K in Tore Supra2009
- Stability Study on Cryocooler-Cooled Superconducting MagnetsIEEE Transactions on Applied Superconductivity, 2005
- Thermal and structural analyses of vacuum vessel and in-vessel components for low aspect ratio tokamak globus-mPlasma Devices and Operations, 2001
- Case Studies in Superconducting Magnets: Design and Operational IssuesPhysics Today, 1995
- Multiple layer insulation for cryogenicapplicationsCryogenics, 1961