Anisotropic Grain Growth and Microstructural Evolution of Dense Mullite above 1550°C
Authors:
- 1 January 2000
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 83 (1) , 204-10
Abstract
Mullite powder with a nearly stoichiometric composition was hot‐pressed at 1550°C to produce an almost fully dense microstructure of fine, nearly uniaxial grains. The grain growth of the dense mullite was investigated during subsequent annealing at temperatures in the range of 1550–1750°C. Grain growth was relatively slow at 1550°C and the microstructure remained nearly equiaxial. Annealing at temperatures above the eutectic temperature (∼1590°C) produced fairly rapid anisotropic grain growth. At 1750°C, the anisotropic grain growth can be divided into two stages. In the first stage, the initial microstructure with an anisometric shape factor of 1.7 evolved rapidly into a microstructure with a shape factor of 2.7, consisting of a significant fraction of highly elongated grains. In the second stage, the microstructure evolved slowly into a system consisting of somewhat “blocky” grains with a shape factor of 2.2. The Al2O3 content of the mullite grains increased slightly and reached an equilibrium value during the first stage of anisotropic grain growth. For the samples annealed at 1750°C, the indentation fracture toughness (2.5 ± 0.2 MPa · m1/2) was almost independent of the anisometric shape factor. The interaction between the indentation cracks and the microstructure showed a predominantly transgranular mode of crack propagation. The data indicate that while a network of highly elongated grains can be developed by the present approach, some further manipulation of the grain boundary chemistry is required for an improvement of the fracture toughness.Keywords
This publication has 27 references indexed in Scilit:
- In Situ Toughened Silicon Carbide with Al‐B‐C AdditionsJournal of the American Ceramic Society, 1996
- Relationship between Microstructure, Toughening Mechanisms, and Fracture Toughness of Reinforced Silicon Nitride CeramicsJournal of the American Ceramic Society, 1995
- In Situ‐Toughened Silicon CarbideJournal of the American Ceramic Society, 1994
- Symposium for Mullite Processing, Structure, and PropertiesJournal of the American Ceramic Society, 1991
- Microstructural Design of Toughened CeramicsJournal of the American Ceramic Society, 1991
- Sintering and Mechanical Properties of Stoichiometric MulliteJournal of the American Ceramic Society, 1985
- Mechanical Properties of MulliteJournal of the American Ceramic Society, 1983
- Fracture Toughness of Si 3 N 4 as a Function of the Initial α‐Phase ContentJournal of the American Ceramic Society, 1979
- Synthesis and Mechanical Properties of Stoichiometric Aluminum Silicate (Mullite)Journal of the American Ceramic Society, 1972
- Analysis of Grain- and Particle-Size Distributions in Metallic MaterialsInternational Materials Reviews, 1972