A Novel Discontinuous PWM Method With Hybrid Three-Step Commutation to Reduce Common-Mode Voltage for Direct Matrix Converter
Open Access
- 7 May 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Industrial Electronics Society
- Vol. 5, 400-414
Abstract
The conventional discontinuous pulsewidth modulation (PWM) can provide several advantages in a direct matrix converter (DMC), such as less switching number and less execution time for modulation signals' calculation. However, it suffers from high common-mode voltage (CMV), which may cause damage to the DMC-based system. This article proposes a novel discontinuous PWM (DPWM) method to not only mitigate CMV but also further improve the conversion efficiency. In this method, the switching sequence is obtained in a new way using two medium and two small input line voltages, increasing the conversion efficiency. Besides, the proposed DPWM employs a rotating vector instead of a zero vector, which causes the CMV to reduce by 50% compared with the conventional DPWM. Notably, the proposed DPWM provides the above advantages while maintaining low total harmonic distortion (THD). Simulations and experiments have been conducted to verify the proposed DPWM method's effectiveness. The results of these tests support the claims made in the paper regarding the reduction of CMV, improved efficiency, and low THD.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 110-2221-E-110-029-MY3)
- NSTC (113-2222-E-155-003-)
This publication has 26 references indexed in Scilit:
- A Novel Three-Step Commutation Method for Direct Matrix Converter Free From Inrush Current and Voltage ErrorIEEE Access, 2023
- A Commutation Method Free from Inrush Current for the Carrier-Based PWM Controlled Direct Matrix Converter2021
- Simple discontinuous PWM strategies to reduce the switching losses of an indirect matrix converterIET Power Electronics, 2020
- Input Power Factor Compensation Strategy for Zero CMV-SVM Method in Matrix ConvertersIEEE Access, 2020
- Review of model predictive control strategies for matrix convertersIET Power Electronics, 2019
- CMV reduction in a three‐to‐seven phase direct matrix converter using SVPWMIET Electric Power Applications, 2019
- Voltage based 2/3/4-step commutation for direct three-level matrix converter2018
- Matrix converter modulation minimizing switching losses and including the 6 rotating vectors of the space vector representation2015
- A novel method of common-mode voltage reduction in matrix convertersInternational Journal of Electronics, 2012
- Matrix converter commutation strategies with and without explicit input voltage sign measurementIEEE Transactions on Industrial Electronics, 2002