Wirelessly Powered High-Temperature Strain Measuring Probe Based on Piezoresistive Nanocrystalline Diamond Layers
Open Access
- 1 September 2016
- journal article
- Published by Walter de Gruyter GmbH in Metrology and Measurement Systems
- Vol. 23 (3) , 437-449
Abstract
A high-temperature piezo-resistive nano-crystalline diamond strain sensor and wireless powering are presented in this paper. High-temperature sensors and electronic devices are required in harsh environments where the use of conventional electronic circuits is impractical or impossible. Piezo-resistive sensors based on nano-crystalline diamond layers were successfully designed, fabricated and tested. The fabricated sensors are able to operate at temperatures of up to 250°C with a reasonable sensitivity. The basic principles and applicability of wireless powering using the near magnetic field are also presented. The system is intended mainly for circuits demanding energy consumption, such as resistive sensors or devices that consist of discrete components. The paper is focused on the practical aspect and implementation of the wireless powering. The presented equations enable to fit the frequency to the optimal range and to maximize the energy and voltage transfer with respect to the coils’ properties, expected load and given geometry. The developed system uses both high-temperature active devices based on CMOS-SOI technology and strain sensors which can be wirelessly powered from a distance of up to several centimetres with the power consumption reaching hundreds of milliwatts at 200°C. The theoretical calculations are based on the general circuit theory and were performed in the software package Maple. The results were simulated in the Spice software and verified on a real sample of the measuring probe.Keywords
This publication has 11 references indexed in Scilit:
- Comparative Tests of Temperature Effects on the Performance of Gan and Sic PhotodiodesMetrology and Measurement Systems, 2015
- Characterization of Optical and Electrical Properties of Transparent Conductive Boron-Doped Diamond thin Films Grown on Fused SilicaMetrology and Measurement Systems, 2014
- Wireless Power Transmission With Self-Regulated Output Voltage for Biomedical ImplantIEEE Transactions on Industrial Electronics, 2013
- Development of a FBG based distributed strain sensor system for wind turbine structural health monitoringSmart Materials and Structures, 2013
- Interferometric Sensor System for Blade Vibration Measurements in Turbomachine ApplicationsIEEE Transactions on Instrumentation and Measurement, 2013
- Design and fabrication of piezoresistive strain gauges based on nanocrystalline diamond layersVacuum, 2012
- An Optimizable Circuit Structure for High-Efficiency Wireless Power TransferIEEE Transactions on Industrial Electronics, 2011
- Electronic and optical properties of boron-doped nanocrystalline diamond filmsPhysical Review B, 2009
- Review on materials, microsensors, systems and devices for high-temperature and harsh-environment applicationsIEEE Transactions on Industrial Electronics, 2001
- Diamond MEMS — a new emerging technologyDiamond and Related Materials, 1999