Information properties of frequency characteristics of dynamic cutting systems in the diagnosis of tool wear
- 13 September 2024
- journal article
- research article
- Published by Novosibirsk State Technical University in Metal Working and Material Science
- Vol. 26 (3)
Abstract
Introduction. One of the directions for increasing the efficiency of cutting is related to the creation of tool wear diagnostic systems. Algorithms and devices have been developed that evaluate wear based on analysis of the vibroacoustic emission signal. These algorithms, as a rule, do not reveal the nature of its formation and the reasons for the change as wear develops. Subject. The paper is devoted to the analysis of the reasons for changes in vibration properties with the development of tool wear. The aim of the work is to study the changes in the frequency characteristics of a dynamic cutting system caused by the development of wear, and to build diagnostic information models on this basis, as well as its use in industry. Method and methodology. The results of mathematical simulation of a perturbed dynamic cutting system are presented, in which the observed vibration sequences are a consequence of disturbances transformed by a dynamic system, the parameters of which depend on wear. Two frequency ranges are considered. Results and discussions. The first range includes frequencies that lie within the bandwidth of the instrument subsystem. The second is outside of it. In the first frequency range, it has been analytically and experimentally proven that the development of wear leads to fundamental changes in the frequency properties of the cutting system as a converter of disturbances into tool vibrations. There is a shift in the natural frequencies of the oscillatory circuits formed by the cutting system, a decrease in its quality factor, and as wear develops, some identified features of the vibration spectra appear, including the ratio of the low-frequency and high-frequency parts of the spectrum, etc. In the second frequency range, a model of force emission in the form of a random pulse sequence is considered and wear is displayed in it. The results of studying the coherence function between the forces acting on the tool and vibrational displacement are presented. Information models of wear are proposed, an example of an information model of wear and the results of its use in industry are given.Keywords
This publication has 26 references indexed in Scilit:
- Monitoring of tool wear using measured machining forces and neuro-fuzzy modelling approaches during machining of GFRP compositesAdvances in Engineering Software, 2015
- Tool wear monitoring using naïve Bayes classifiersThe International Journal of Advanced Manufacturing Technology, 2014
- An innovative approach to monitor the chip formation effect on tool state using acoustic emission in turningInternational Journal of Machine Tools and Manufacture, 2012
- A review of flank wear prediction methods for tool condition monitoring in a turning processThe International Journal of Advanced Manufacturing Technology, 2012
- A cutter tool monitoring in machining process using Hilbert–Huang transformInternational Journal of Machine Tools and Manufacture, 2010
- Application of AE and cutting force signals in tool condition monitoring in micro-millingCIRP Journal of Manufacturing Science and Technology, 2008
- Precision manufacturing process monitoring with acoustic emissionInternational Journal of Machine Tools and Manufacture, 2006
- State-of-the-art methods and results in tool condition monitoring: a reviewThe International Journal of Advanced Manufacturing Technology, 2005
- The assessment of cutting tool wearInternational Journal of Machine Tools and Manufacture, 2004
- Tool wear monitoring in ramp cuts in end milling using the wavelet transformThe International Journal of Advanced Manufacturing Technology, 2004