Analysis of Silicon Carbide Varistors for Fast Discharge Units of DEMO Toroidal Field Superconducting Magnets in Case of a Quench
- 6 March 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-5
Abstract
This work investigates innovative technologies for DEMOnstration power plant (DEMO) Fast Discharge Units (FDUs), in comparison with traditional temperature-dependent discharge resistors. The protection system for the DEMO Toroidal Field (TF) superconducting magnets is designed to respond to a quench, which is a rapid transition from the superconducting state to normal conduction, or other faults. This system helps prevent severe damage to the TF magnets, which can experience significant thermal and voltage stresses during a quench, due to the intervention of the FDUs. These stresses can damage the insulation and compromise the magnet's integrity. FDUs play a crucial role in rapidly discharging the magnetic energy stored in the magnets. Silicon Carbide (SiC) varistors within the FDU, with their nonlinear behavior, can significantly reduce the voltage peak across the TF magnet at fast discharge with respect to normal resistors. In the high current configuration, the DEMO TF magnet system is composed of 16 TF coils, with: a total inductance of 22.56 H, an operating current of 105 kA and a total magnetic energy stored of about 124 GJ. Maximum voltage limits for TF coils are 6 kV terminal-to-terminal and 3 kV terminal-to-ground. Performance of technologies are compared considering voltage and hotspot temperature.Keywords
Funding Information
- European Union via the Euratom Research and Training Programme (101052200)
This publication has 16 references indexed in Scilit:
- Tests of power supply and fast discharge unit for the Frascati Coil Cold Test FacilityFusion Engineering and Design, 2025
- Multiphysical modelling of superconducting coil discharge through varistorsFusion Engineering and Design, 2025
- Transient electrical behavior of DEMO toroidal field coils system in normal operation and fault conditionsFusion Engineering and Design, 2025
- DEMO toroidal field coil fast discharge unit integration studiesFusion Engineering and Design, 2024
- Frequency response analysis of a toroidal field coil of the divertor tokamak test facilityFusion Engineering and Design, 2023
- Final design of the DTT Toroidal power supply circuitFusion Engineering and Design, 2023
- Benefits of high-energy varistors in breakdown and fast discharge unitsFusion Engineering and Design, 2022
- Design optimization for the quench protection of DTT's superconducting toroidal field magnetsFusion Engineering and Design, 2021
- Preliminary studies on DEMO toroidal field circuit topology and overvoltage estimationFusion Engineering and Design, 2019
- Analyses of the impact of connections’ layout on the coil transient voltage at the Quench Protection Circuit intervention in JT-60SAFusion Engineering and Design, 2015