Alberto Ferro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Alberto Ferro has a total of 300 co-authors. Here are the top co-authors by number of shared publications:
- Elena Gaio
Consorzio RFX (CNR, ENEA, INFN, Universit di Padova, Acciaierie Venete SpA), Padua, Italy
13 shared publications - Alberto Maistrello
Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4
8 shared publications - Francesco Lunardon
Consorzio RFX (CNR, ENEA, INFN, Universit di Padova, Acciaierie Venete SpA), Padua, Italy
4 shared publications - Francesco Santoro
Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4
4 shared publications Luca Novello
4 shared publicationsM. Cavenago
INFN-LNL, Legnaro, Padua, Italy
4 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (11) , 115005
Technical innovation assessment of SiC varistors for quench protection of DEMO toroidal field superconducting coils
This paper investigates the feasibility and technical advantages of utilizing silicon carbide (SiC) varistors for the energy extraction systems of the toroidal field coils (TFC) in case of a quench in the present European DEMO fusion reactor design. Varistors offer a non-linear voltage-current response that provides faster discharge times and voltage limiting behavior compared to traditional linear resistors. Using the Metrosil 9000 series varistors as a baseline, comprehensive discharge simulations were conducted for both 8 and 16 Fast Discharge Unit configurations. The study integrates electrical transient simulations to assess clamping voltages and advanced thermal modeling to evaluate the corresponding stress on the superconducting cables. Specifically, the quench propagation and the hotspot temperature evolution were investigated using both conservative adiabatic calculations and detailed transient thermal-hydraulic modeling (via the 4 C code). Results indicate that, in normal operation mode, while voltage limits are successfully managed, the Joule integral limit is currently exceeded. Consequently, the thermal-hydraulic analysis reveals that jacket hotspot temperatures surpass the 150 K acceptance limit with varistor-based discharges, inducing higher thermal stresses than traditional resistors. This highlights a dual requirement: the need for varistor material optimizations in the case of DEMO TFCs–specifically targeting a lower non-linearity parameter ( β < 0.3 )— , in order to fully realize the benefits of SiC varistors for high-energy fusion applications, and a potential reassessment of the conductor design, in terms of both copper stabilizer amount and cross-section geometry, to improve current sharing during the discharge and conductor stability against small disturbances.
- 1 November 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (11) , 115005
Open AccessTechnical innovation assessment of SiC varistors for quench protection of DEMO toroidal field superconducting coils
This paper investigates the feasibility and technical advantages of utilizing silicon carbide (SiC) varistors for the energy extraction systems of the toroidal field coils (TFC) in case of a quench in the present European DEMO fusion reactor design. Varistors offer a non-linear voltage-current response that provides faster discharge times and voltage limiting behavior compared to traditional linear resistors. Using the Metrosil 9000 series varistors as a baseline, comprehensive discharge simulations were conducted for both 8 and 16 Fast Discharge Unit configurations. The study integrates electrical transient simulations to assess clamping voltages and advanced thermal modeling to evaluate the corresponding stress on the superconducting cables. Specifically, the quench propagation and the hotspot temperature evolution were investigated using both conservative adiabatic calculations and detailed transient thermal-hydraulic modeling (via the 4 C code). Results indicate that, in normal operation mode, while voltage limits are successfully managed, the Joule integral limit is currently exceeded. Consequently, the thermal-hydraulic analysis reveals that jacket hotspot temperatures surpass the 150 K acceptance limit with varistor-based discharges, inducing higher thermal stresses than traditional resistors. This highlights a dual requirement: the need for varistor material optimizations in the case of DEMO TFCs–specifically targeting a lower non-linearity parameter ( β < 0.3 )— , in order to fully realize the benefits of SiC varistors for high-energy fusion applications, and a potential reassessment of the conductor design, in terms of both copper stabilizer amount and cross-section geometry, to improve current sharing during the discharge and conductor stability against small disturbances.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (10) , 5545-5550
First Experimental Characterization of the Magnetic Energy Storage and Transfer (MEST) System
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (10) , 5545-5550
First Experimental Characterization of the Magnetic Energy Storage and Transfer (MEST) System
- 6 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-5
Analysis of Silicon Carbide Varistors for Fast Discharge Units of DEMO Toroidal Field Superconducting Magnets in Case of a Quench
This work investigates innovative technologies for DEMOnstration power plant (DEMO) Fast Discharge Units (FDUs), in comparison with traditional temperature-dependent discharge resistors. The protection system for the DEMO Toroidal Field (TF) superconducting magnets is designed to respond to a quench, which is a rapid transition from the superconducting state to normal conduction, or other faults. This system helps prevent severe damage to the TF magnets, which can experience significant thermal and voltage stresses during a quench, due to the intervention of the FDUs. These stresses can damage the insulation and compromise the magnet's integrity. FDUs play a crucial role in rapidly discharging the magnetic energy stored in the magnets. Silicon Carbide (SiC) varistors within the FDU, with their nonlinear behavior, can significantly reduce the voltage peak across the TF magnet at fast discharge with respect to normal resistors. In the high current configuration, the DEMO TF magnet system is composed of 16 TF coils, with: a total inductance of 22.56 H, an operating current of 105 kA and a total magnetic energy stored of about 124 GJ. Maximum voltage limits for TF coils are 6 kV terminal-to-terminal and 3 kV terminal-to-ground. Performance of technologies are compared considering voltage and hotspot temperature.
- 6 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-5
Analysis of Silicon Carbide Varistors for Fast Discharge Units of DEMO Toroidal Field Superconducting Magnets in Case of a Quench
This work investigates innovative technologies for DEMOnstration power plant (DEMO) Fast Discharge Units (FDUs), in comparison with traditional temperature-dependent discharge resistors. The protection system for the DEMO Toroidal Field (TF) superconducting magnets is designed to respond to a quench, which is a rapid transition from the superconducting state to normal conduction, or other faults. This system helps prevent severe damage to the TF magnets, which can experience significant thermal and voltage stresses during a quench, due to the intervention of the FDUs. These stresses can damage the insulation and compromise the magnet's integrity. FDUs play a crucial role in rapidly discharging the magnetic energy stored in the magnets. Silicon Carbide (SiC) varistors within the FDU, with their nonlinear behavior, can significantly reduce the voltage peak across the TF magnet at fast discharge with respect to normal resistors. In the high current configuration, the DEMO TF magnet system is composed of 16 TF coils, with: a total inductance of 22.56 H, an operating current of 105 kA and a total magnetic energy stored of about 124 GJ. Maximum voltage limits for TF coils are 6 kV terminal-to-terminal and 3 kV terminal-to-ground. Performance of technologies are compared considering voltage and hotspot temperature.
- Open Access
- 30 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 28433-28443
A Sensitivity Analysis on Design of the EU-DEMO Steady-State Electrical Power Distribution Grid via Monte Carlo-Based Probabilistic Power Flow Models
The EU-DEMO (EUropean DEMOnstration Power Plant) fusion reactor is one of the most ambitious energy projects aiming at demonstrating the feasibility of nuclear fusion to be a clean, safe, and sustainable source of energy. The distribution grid of the DEMO facility plays a crucial role in delivering the net generated power to the European transmission grid, so it is imperative for its operation to be reliable. The proper design of the electrical subsystems within the fusion power plant is a fundamental factor that must be considered to guarantee reliable and secure operations. This paper presents the models and the results of a sensitivity analysis on the design and sizing of the components of DEMO electrical power system, under different operating conditions, exploiting a Monte Carlo-based Probabilistic Power Flow methodology. This approach was selected to assess the impact of uncertainties on DEMO steady-state power distribution grid and to identify the critical components, which need special requests in their design. The results of the sensitivity analysis can provide valuable insights for the design and sizing of the distribution system of the facility.
- 30 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 28433-28443
Open AccessA Sensitivity Analysis on Design of the EU-DEMO Steady-State Electrical Power Distribution Grid via Monte Carlo-Based Probabilistic Power Flow Models
The EU-DEMO (EUropean DEMOnstration Power Plant) fusion reactor is one of the most ambitious energy projects aiming at demonstrating the feasibility of nuclear fusion to be a clean, safe, and sustainable source of energy. The distribution grid of the DEMO facility plays a crucial role in delivering the net generated power to the European transmission grid, so it is imperative for its operation to be reliable. The proper design of the electrical subsystems within the fusion power plant is a fundamental factor that must be considered to guarantee reliable and secure operations. This paper presents the models and the results of a sensitivity analysis on the design and sizing of the components of DEMO electrical power system, under different operating conditions, exploiting a Monte Carlo-based Probabilistic Power Flow methodology. This approach was selected to assess the impact of uncertainties on DEMO steady-state power distribution grid and to identify the critical components, which need special requests in their design. The results of the sensitivity analysis can provide valuable insights for the design and sizing of the distribution system of the facility.
- 15 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 3802-3808
Innovative Concepts in the DTT Neutral Beam Injector
The main purpose of the divertor tokamak test (DTT) facility is to study alternative solutions to mitigate the issue of the power exhaust, under integrated physics and technical conditions relevant to ITER and DEMO. One of the most complex and innovative subsystems of the entire project is certainly the negative-ion-based neutral beam injector (NBI), meant to inject 10 MW of auxiliary power with a beam of 510 keV deuterium neutrals. This contribution describes the conceptual design of the beamline for the DTT NBI system, with a particular focus on the innovative technical solutions adopted to fulfill the requirements and maximize the performance. The DTT NBI is required to operate with high efficiency in several operating scenarios, covering a large range of beam energies, between 10% and 100% of the nominal value (510 keV). To reach this challenging goal, an innovative accelerator design, the spherical and lemon hyperlens grids (SLHGs), has been developed. The implementation of this design concept of the accelerator has recently become possible thanks to recent improvements in additive manufacturing (AM) technology. Another original aspect of the DTT NBI, compared to existing devices, regards the vacuum pumping system, which will be based on nonevaporable getter (NEG) pumps. This will represent the first application of the NEG technology to an NBI for the heating and current drive system of a fusion experiment, with a possible simplification of the overall construction, with respect to typical solutions based on cryogenic pumps. Other innovative solutions are the cylindrical sawtooth structure (CSS) for the neutralizer panels and the stray field shielding system (SFSS) with encapsulated neutralizer. This article provides an overview of the injector for DTT NBI with a particular focus on innovative technical solutions.
- 15 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 3802-3808
Innovative Concepts in the DTT Neutral Beam Injector
The main purpose of the divertor tokamak test (DTT) facility is to study alternative solutions to mitigate the issue of the power exhaust, under integrated physics and technical conditions relevant to ITER and DEMO. One of the most complex and innovative subsystems of the entire project is certainly the negative-ion-based neutral beam injector (NBI), meant to inject 10 MW of auxiliary power with a beam of 510 keV deuterium neutrals. This contribution describes the conceptual design of the beamline for the DTT NBI system, with a particular focus on the innovative technical solutions adopted to fulfill the requirements and maximize the performance. The DTT NBI is required to operate with high efficiency in several operating scenarios, covering a large range of beam energies, between 10% and 100% of the nominal value (510 keV). To reach this challenging goal, an innovative accelerator design, the spherical and lemon hyperlens grids (SLHGs), has been developed. The implementation of this design concept of the accelerator has recently become possible thanks to recent improvements in additive manufacturing (AM) technology. Another original aspect of the DTT NBI, compared to existing devices, regards the vacuum pumping system, which will be based on nonevaporable getter (NEG) pumps. This will represent the first application of the NEG technology to an NBI for the heating and current drive system of a fusion experiment, with a possible simplification of the overall construction, with respect to typical solutions based on cryogenic pumps. Other innovative solutions are the cylindrical sawtooth structure (CSS) for the neutralizer panels and the stray field shielding system (SFSS) with encapsulated neutralizer. This article provides an overview of the injector for DTT NBI with a particular focus on innovative technical solutions.
- 21 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 3970-3977
Overview on the Applicability of the ITER/NPP-Like Technologies to the DEMO Plant Electrical System and Promising Alternatives
The Plant Electrical System (PES) of the European DEMOnstration fusion power plant (DEMO), presently under conceptual design, shall supply power to the loads and deliver net power to the Power Transmission Grid (PTG). Starting from the available requirements, the applicability to DEMO PES of the technologies and design approaches adopted in ITER and nuclear power plants (NPP) has been evaluated. This article presents the results of the survey and proposes alternative solutions to deal with the identified criticalities.
- 21 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 3970-3977
Overview on the Applicability of the ITER/NPP-Like Technologies to the DEMO Plant Electrical System and Promising Alternatives
The Plant Electrical System (PES) of the European DEMOnstration fusion power plant (DEMO), presently under conceptual design, shall supply power to the loads and deliver net power to the Power Transmission Grid (PTG). Starting from the available requirements, the applicability to DEMO PES of the technologies and design approaches adopted in ITER and nuclear power plants (NPP) has been evaluated. This article presents the results of the survey and proposes alternative solutions to deal with the identified criticalities.
- 20 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (3) , 927-935
SPIDER, the Negative Ion Source Prototype for ITER: Overview of Operations and Cesium Injection
An overview of the recent operations and the main results of cesium injection in the Source for the Production of Ions of Deuterium Extracted from Rf plasma (SPIDER) negative ion source are described in this contribution. In experiments without cesium injection, all SPIDER plants were tested to verify the basic expectations on the operational parameters (e.g., electron cooling effectiveness of magnetic filter field) and to determine its operational region. For beam properties, it was shown that the current density varies across the beam in the vertical direction. In preliminary cesium experiments, the expected increase of negative ion current and simultaneous decrease of co-extracted electrons were found, along with the influence of the control parameters (polarization of the plasma electrodes, magnetic filter field) on the SPIDER beam uniformity in the horizontal and vertical directions. It was shown that non-Gaussian tails can be identified in the angular distribution on the plane perpendicular to the beam propagation direction. Stray particles, nonhomogeneous beam and large divergence might result in unexpected heat and particle loads over ITER neutral beam injector (NBI) accelerator grids; it is the goal of SPIDER to assess and possibly to identify suitable methods for controlling these beam features. A major shutdown, planned for late 2021, to solve the issues identified during the operation and to carry out scheduled modifications, is outlined. Such improvements are expected to allow SPIDER to pursue the ITER requirements in terms of negative ion current, electron-to-ion ratio, and beam duration.
- 20 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (3) , 927-935
SPIDER, the Negative Ion Source Prototype for ITER: Overview of Operations and Cesium Injection
An overview of the recent operations and the main results of cesium injection in the Source for the Production of Ions of Deuterium Extracted from Rf plasma (SPIDER) negative ion source are described in this contribution. In experiments without cesium injection, all SPIDER plants were tested to verify the basic expectations on the operational parameters (e.g., electron cooling effectiveness of magnetic filter field) and to determine its operational region. For beam properties, it was shown that the current density varies across the beam in the vertical direction. In preliminary cesium experiments, the expected increase of negative ion current and simultaneous decrease of co-extracted electrons were found, along with the influence of the control parameters (polarization of the plasma electrodes, magnetic filter field) on the SPIDER beam uniformity in the horizontal and vertical directions. It was shown that non-Gaussian tails can be identified in the angular distribution on the plane perpendicular to the beam propagation direction. Stray particles, nonhomogeneous beam and large divergence might result in unexpected heat and particle loads over ITER neutral beam injector (NBI) accelerator grids; it is the goal of SPIDER to assess and possibly to identify suitable methods for controlling these beam features. A major shutdown, planned for late 2021, to solve the issues identified during the operation and to carry out scheduled modifications, is outlined. Such improvements are expected to allow SPIDER to pursue the ITER requirements in terms of negative ion current, electron-to-ion ratio, and beam duration.
- Open Access
- 20 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 4039-4046
Studies on Alternative Schemes for the MMC-Based Acceleration Grid Power Supply of DEMO Neutral Beam Injector
The European DEMO will make use of a significant additional heating power, which could be partly provided by neutral beam injectors (NBIs), which accelerate negative ions by means of grids placed at increasing potentials. These grids will be fed by the acceleration grid power supply (AGPS), divided in a number of stages, which has to provide an overall dc voltage down to $-$ 1 MV and currents in the order of tens of Amperes. The AGPS will have to satisfy a set of static and dynamic requirements, mainly in terms of ripple, accuracy, and rise time. In addition, during the NBI operation, frequent losses of insulation between the grids, called breakdowns (BDs), are expected. The AGPS will be able to handle such events by nullifying the output currents as fast as possible in order to limit the energy discharged onto the grids. Adopting the modular multilevel converter (MMC) technology for the AGPS of DEMO and future tokamaks seems promising, due to its intrinsic properties of modularity, high efficiency, fast dynamic response and small energy transferred to the arc in case of BD. Since the converter will be air-insulated, one of the main drawbacks is the large volume occupied. This can be partly reduced by adopting alternative MMC schemes, to minimize the number of components and optimize the counter-voltage applied by the converter at BD. In this article, alternative topologies for the MMC submodules (SMs) or combinations of different schemes full-bridge (FB), half-bridge (HB) are investigated. After a preliminary design of the converter, the results of numerical simulations carried out with circuit models are shown, with control schemes customized for the NBI operation. The performance of the different solutions in steady-state, dynamic and anomalous conditions are discussed, with particular focus on BD events. Finally, thermal analyses on the converter are carried out, to verify whether natural convection of air can be a suitable cooling method for the power components.
- 20 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 4039-4046
Open AccessStudies on Alternative Schemes for the MMC-Based Acceleration Grid Power Supply of DEMO Neutral Beam Injector
The European DEMO will make use of a significant additional heating power, which could be partly provided by neutral beam injectors (NBIs), which accelerate negative ions by means of grids placed at increasing potentials. These grids will be fed by the acceleration grid power supply (AGPS), divided in a number of stages, which has to provide an overall dc voltage down to $-$ 1 MV and currents in the order of tens of Amperes. The AGPS will have to satisfy a set of static and dynamic requirements, mainly in terms of ripple, accuracy, and rise time. In addition, during the NBI operation, frequent losses of insulation between the grids, called breakdowns (BDs), are expected. The AGPS will be able to handle such events by nullifying the output currents as fast as possible in order to limit the energy discharged onto the grids. Adopting the modular multilevel converter (MMC) technology for the AGPS of DEMO and future tokamaks seems promising, due to its intrinsic properties of modularity, high efficiency, fast dynamic response and small energy transferred to the arc in case of BD. Since the converter will be air-insulated, one of the main drawbacks is the large volume occupied. This can be partly reduced by adopting alternative MMC schemes, to minimize the number of components and optimize the counter-voltage applied by the converter at BD. In this article, alternative topologies for the MMC submodules (SMs) or combinations of different schemes full-bridge (FB), half-bridge (HB) are investigated. After a preliminary design of the converter, the results of numerical simulations carried out with circuit models are shown, with control schemes customized for the NBI operation. The performance of the different solutions in steady-state, dynamic and anomalous conditions are discussed, with particular focus on BD events. Finally, thermal analyses on the converter are carried out, to verify whether natural convection of air can be a suitable cooling method for the power components.
- 10 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 3941-3946
The Full-Voltage Operation of the Acceleration Grid Power Supply for SPIDER Experiment
In SPIDER, the full-scale prototype of the negative ion source of the ITER Heating Neutral Beam Injectors, negative ions of hydrogen or deuterium are extracted and accelerated by a set of grids. This article describes the process and the technical solutions that allowed achieving the asseveration to operate the Acceleration Grid Power Supply of SPIDER at full voltage (-96 kV), reports the first experimental results, and discusses some possible enhancements that have been identified.
- 10 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 3941-3946
The Full-Voltage Operation of the Acceleration Grid Power Supply for SPIDER Experiment
In SPIDER, the full-scale prototype of the negative ion source of the ITER Heating Neutral Beam Injectors, negative ions of hydrogen or deuterium are extracted and accelerated by a set of grids. This article describes the process and the technical solutions that allowed achieving the asseveration to operate the Acceleration Grid Power Supply of SPIDER at full voltage (-96 kV), reports the first experimental results, and discusses some possible enhancements that have been identified.
- 14 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 4027-4032
Improved Conceptual Design of the Beamline for the DTT Neutral Beam Injector
The Divertor Tokamak Test facility (DTT) will be a new experimental facility located at Frascati, Rome, Italy, whose main goal will be to have a better understanding on hot plasma interactions with plasma-facing components (PFCs) and aid in the development of ITER and successively DEMO. The improved conceptual design of the beamline for the DTT neutral beam heating (NBH) system is here overviewed, with a particular focus on the technical solutions adopted to fulfill the requirements and maximize beamline performances. The proposed system features a beamline providing deuterium neutrals (D⁰) with an energy of 510 keV and an injected power of 10 MW. Various design options have been considered, and a comprehensive set of simulations has been carried out using several physics and engineering codes to drive the choice of the most suitable design options and optimize them, aiming at finding a good compromise among different design requirements.
- 14 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 4027-4032
Improved Conceptual Design of the Beamline for the DTT Neutral Beam Injector
The Divertor Tokamak Test facility (DTT) will be a new experimental facility located at Frascati, Rome, Italy, whose main goal will be to have a better understanding on hot plasma interactions with plasma-facing components (PFCs) and aid in the development of ITER and successively DEMO. The improved conceptual design of the beamline for the DTT neutral beam heating (NBH) system is here overviewed, with a particular focus on the technical solutions adopted to fulfill the requirements and maximize beamline performances. The proposed system features a beamline providing deuterium neutrals (D⁰) with an energy of 510 keV and an injected power of 10 MW. Various design options have been considered, and a comprehensive set of simulations has been carried out using several physics and engineering codes to drive the choice of the most suitable design options and optimize them, aiming at finding a good compromise among different design requirements.