Optimization of Dimensions of Smooth and Twisted-Tape-Inserted Tubes for Heat Transfer with NaCl/KCl/MgCl2 Molten Salts by Principle of Entropy Generation Minimization
- 26 June 2023
- journal article
- research article
- Published by ASME International in Journal of Solar Energy Engineering
- Vol. 146 (1) , 1-9
Abstract
The entropy generation minimization principle is used as the criterion to optimize the flow and heat transfer of solar collectors and heat exchangers that use molten salts NaCl–KCl–MgCl2 and KCl–MgCl2. The Gnielinski correlation for the Nusselt number versus Reynolds number, as well as the Moody friction factor given by Petukhov, was used for the calculation of the convective heat transfer coefficient and pressure loss due to friction in smooth tubes. For twisted-tap-inserted tube, equations of Nu and friction factor provided by Manglik and Bergles were used. The objective function, the entropy generation rate of the heat transfer system, was expressed as the function of Reynolds number, Prandtl number, heating flux, tube diameter, etc. As a result of the analysis, the optimum Reynolds number was determined and thereby to determine the optimum Nusselt number, convective heat transfer coefficient, friction factor, and tube diameter, which also allows the calculation of optimum flow velocity. The analysis was conducted in the fluid temperature range of 500–700 °C, which covers the operation temperature for supercritical CO2 power cycles in concentrated solar power (CSP) system. Optimized results from the smooth tube and twisted-tap-inserted tube are compared, which is important to the design of solar receivers for CSP systems.Keywords
Funding Information
- Solar Energy Technologies Program (DE-EE0009380)
This publication has 24 references indexed in Scilit:
- Experimental investigation on heat transfer enhancement with twisted tape having various V-cut configurationsApplied Thermal Engineering, 2020
- CFD modelling of entropy generation in turbulent pipe flow: Effects of temperature difference and swirl intensityApplied Thermal Engineering, 2016
- Heat transfer enhancement by tapered twisted tape insertsChemical Engineering and Processing - Process Intensification, 2015
- Thermal design guidelines of solar power towersApplied Thermal Engineering, 2014
- Numerical investigation of entropy generation in a parabolic trough receiver at different concentration ratiosEnergy, 2013
- Heat transfer enhancement in a tube using delta-winglet twisted tape insertsApplied Thermal Engineering, 2010
- Heat transfer behaviors in a tube with combined conical-ring and twisted-tape insertInternational Communications in Heat and Mass Transfer, 2007
- Heat transfer and entropy generation optimization of forced convection in porous-saturated ducts of rectangular cross-sectionInternational Journal of Heat and Mass Transfer, 2007
- Direct and indirect methods of calculating entropy generation rates in turbulent convective heat transfer problemsHeat and Mass Transfer, 2006
- Entropy production calculation for turbulent shear flows and their implementation in cfd codesInternational Journal of Heat and Fluid Flow, 2005