Non-Isothermal Crystallization Behavior and Crystal Morphology of EPDM/PP Thermoplastic Vulcanizates Containing TAC and OV-POSS Coagents
Open Access
Abstract
Ethylene propylene diene monomer rubber/polypropylene (EPDM/PP) thermoplastic vulcanizates containing triallyl cyanurate (TAC) or octavinyl polyhedral oligomeric silsesquioxane (OV-POSS) coagents were prepared by dynamic vulcanization. The effects of coagent type, loading level, and EPDM/PP ratio on non-isothermal crystallization were investigated using differential scanning calorimetry (DSC), polarized optical microscopy (POM), and X-ray diffraction (XRD). Crystallization kinetics were evaluated using the Avrami, Ozawa, and combined Avrami-Ozawa models, while nucleation activity and apparent activation energies were assessed using the Dobreva-Gutzow, Kissinger, Takhor, and Friedman approaches. Both coagents, particularly OV-POSS, shifted crystallization onset toward higher temperatures, demonstrating enhanced heterogeneous nucleation. The decreasing Avrami-derived half-times t0.5 with increasing cooling rate were qualitatively consistent with the experimental DSC half-times t1/2. The Ozawa model did not adequately describe the investigated systems, while the combined Avrami-Ozawa model provided satisfactory correlations. The influence of the coagents on the overall crystallization rate depended on composition, loading, and cooling rate. In particular, high OV-POSS loading promoted earlier nucleation but did not consistently shorten t0.5, especially in the EPDM-rich TPVs. POM revealed earlier crystal formation, increased nucleation density, and smaller spherulites in the coagent-containing samples. DSC analysis revealed an increase in PP-normalized crystallinity upon OV-POSS incorporation, while XRD confirmed an increased crystalline fraction, predominantly associated with the α-crystalline form. This effect was particularly pronounced in the PP-rich formulations. Although OV-POSS promoted heterogeneous nucleation and crystalline structure development, its influence on the overall crystallization rate remained dependent on blend composition, coagent loading, and cooling conditions, suggesting a complex interplay between nucleation and subsequent crystal growth.Keywords
Funding Information
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (119M378)
- Kocaeli Üniversitesi (FBA-2026-5360)
This publication has 44 references indexed in Scilit:
- Nonisothermal Crystallization Kinetics and Dynamic Rheological Behavior of Concentrated Thermoplastic Vulcanizates ( TPVC )Journal of Applied Polymer Science, 2026
- Influence of Reprocessing on the Mechanical, Thermal, and Rheological Properties of EPDM / PP ‐Based Thermoplastic VulcanizatesPolymer Engineering & Science, 2025
- The Sea‐Island Structured EPDM / PP TPV With Shape Memory Performance In Situ Compatibilized by Magnesium Maleic and Maleic AnhydrideJournal of Applied Polymer Science, 2025
- Dynamically vulcanized CNC‐reinforced thermoplastic elastomer based on PP / EPDM : Morphology and mechanical properties control via interfacial compatibilizationPolymer Engineering & Science, 2024
- Influence of different mixing sequence on UHMW‐EPDM based thermoplastic vulcanizates: Mechanical, rheological and morphological characteristicsJournal of Applied Polymer Science, 2022
- Non‐isothermal crystallization kinetics of PEG plasticized PLA/G‐POSS nanocompositesPolymer Composites, 2015
- Primary and secondary crystallization kinetic analysis of nylon 1212Polymer International, 2004
- Is the Kissinger Equation Applicable to the Processes that Occur on Cooling?Macromolecular Rapid Communications, 2002
- Nonisothermal melt and cold crystallization kinetics of poly(aryl ether ether ketone ketone)Polymer Engineering & Science, 1997
- Kinetics of thermal degradation of char‐forming plastics from thermogravimetry. Application to a phenolic plasticJournal of Polymer Science Part C: Polymer Symposia, 1964