Mechanically Strong and Fast‐Curing Kraft Lignin‐Based Polyurethane Foam
- 16 December 2024
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (11)
Abstract
The creation of biobased rigid polyurethane from nonfood resources such as lignin has garnered significant interest, especially concerning the biorefinery concept. However, few studies have investigated virgin lignin as a polyol source for polyurethane foam and the effects of single factors, such as the lignin solvent, lignin concentration, and lignin:isocyanate ratio, on the properties of polyurethane. High‐density rigid foam (~500 kg/m3) was successfully formed by all the solvents except sodium hydroxide, which was confirmed via Fourier transform infrared (FTIR) spectroscopy and pyrolysis‐gas chromatography–mass spectrometry (Py‐GCMS). The highest to lowest modulus of elasticity (MOE) and modulus of rupture (MOR) values for the different lignin solvents were as follows: tetrahydrofuran (THF) (402.25 and 13.24 N/mm2) > dimethyl formamide (DMF) (46 and 1.69 N/mm2) > dimethyl sulfoxide (DMSO) (29 and 1.39 N/mm2). DMSO was selected as the optimal solvent because of the considerable curing time (26.67 s) needed to produce rigid foam. A higher lignin concentration resulted in better physical, mechanical, and thermal properties of the foam to some extent. Moreover, the opposite occurred with increasing isocyanate ratio in the system. These findings can serve as a basis for optimizing the utilization of lignin as a bioresource in the manufacture of rigid polyurethane foam with more specific uses.Keywords
Funding Information
- Lembaga Pengelola Dana Pendidikan (273/E1/PRN/2020, B‐4528/IPH/KS.02.04/VII/2020)
This publication has 56 references indexed in Scilit:
- Capability lignin from Acacia crassicarpa black liquor as an environmentally benign antibacterial agent to produce antibacterial and hydrophobic textilesBioresource Technology, 2024
- Production of polyols and polyurethane from biomass: a reviewEnvironmental Chemistry Letters, 2023
- Determination of the Structures of Lignin Subunits and Nanoparticles in Solution by Small‐Angle Neutron Scattering: Towards Improving Lignin ValorizationChemSusChem, 2022
- Conversion of agro-industrial wastes of sorghum bagasse and molasses into lightweight roof tile compositeBiomass Conversion and Biorefinery, 2022
- Lignin‐Based Polyurethane: Recent Advances and Future PerspectivesMacromolecular Rapid Communications, 2020
- Effect of Lignin Content as Bio‐Chain Extender in Polyurethane FoamMacromolecular Symposia, 2020
- Structural Analysis of Polyurethane Monomers by Pyrolysis GC TOFMS via Dopant-Assisted Atmospheric Pressure Chemical IonizationJournal of the American Society for Mass Spectrometry, 2019
- Modeling reaction kinetics of rigid polyurethane foaming processJournal of Applied Polymer Science, 2013
- Assessment of the degradation of polyurethane foams after artificial and natural ageing by using pyrolysis-gas chromatography/mass spectrometry and headspace-solid phase microextraction-gas chromatography/mass spectrometryJournal of Chromatography A, 2011
- Mechanical properties of high density polyurethane foams: I. Effect of the densityComposites Science and Technology, 2006