Investigations on Spin Power Losses Generated in a Planetary Gear Set Using Thermal Network Method
Open Access
- 24 October 2024
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 12 (11) , 366
Abstract
This paper introduces an experimental approach to study the distribution of power losses in an oil jet-lubricated planetary gear set, with the aim of increasing the efficiency of these gearboxes. A thermal model is developed to estimate power losses associated with temperature distribution. This model is applied to analyze experimental data collected from a dedicated test setup. Different configurations are studied to progressively validate the thermal network. In this paper, only a configuration composed of a rotating ring gear and a fixed planet carrier is studied. This configuration enables the validation of a thermal network developed from a basic configuration where power loss sources are not numerous. The study reveals that, for this configuration, load-independent power losses are primarily attributed to hydrodynamic losses in the bearings, while the gear windage effects are of second order. The power losses are then compared to those generated by the same planetary gear set but using a rotating planet carrier. The comparison shows that the configuration composed of the rotating ring gear and fixed planet carrier produces less power loss than the other configuration.Keywords
Funding Information
- ANRT (CIFRE n°2022/0230)
This publication has 20 references indexed in Scilit:
- Power Losses of Oil-Jet Lubricated Ball Bearings With Limited Applied Load: Part 2—Experiments and Model ValidationTribology Transactions, 2023
- Mechanical power losses of full-complement needle bearings of planetary gear sets: Model and experimentsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2015
- An experimental investigation of spin power losses of a planetary gear setMechanism and Machine Theory, 2015
- Influence of Ring Gear Rim Thickness on Planetary Gear Set BehaviorJournal of Mechanical Design, 2010
- Windage Losses in High Speed Gears—Preliminary Experimental and Theoretical ResultsJournal of Mechanical Design, 2004
- Influence of oil temperature on gear failuresTribology International, 2004
- A Review of Formulas for the Mechanical Efficiency Analysis of Two Degrees-of-Freedom Epicyclic Gear TrainsJournal of Mechanical Design, 2003
- The Mechanical Efficiency of Epicyclic Gear TrainsJournal of Mechanical Design, 1993
- Power Flow and Loss in Differential MechanismsJournal of Mechanical Engineering Science, 1961
- Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating DisksJournal of Basic Engineering, 1960