TTThomas Touret

Thomas Touret

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Thomas Touret has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Predicting and Minimising Tooth Friction in Gear Transmissions: A Closed-Form Model of Load, Temperature, Speed, and Roughness

    by Maxence Bigerelle, Julie Lemesle, Eddy Chevallier, Yasser Diab, Thomas Touret, Christophe Changenet, Fabrice Ville

    Accurate modeling of the tooth friction coefficient is central to analyses of efficiency, vibration, and durability in enclosed gear drives. Physics-based models describe these contacts using a large set of coupled thermal, contact, and lubrication laws whose individual parameters have uncertainties that are difficult to propagate. This study proposes a compact alternative: the HAF model, a three-parameter phenomenological description of the friction coefficient as a function of the slide-to-roll ratio (SRR). The three parameters have distinct tribological interpretations: h (hysteresis) governs the steepness of the sigmoidal transition, a (attrition) governs the slope of the plateau, and ν (friction level) governs the overall magnitude. The model is calibrated using nonlinear regression with fourteen two-disc traction curves acquired with a one-factor-at-a-time (star) design around a reference operating point (1.6 GPa, 80 °C, and 20 m/s): the contact pressure (1.2, 1.6, and 1.9 GPa), the injection temperature (40, 80, and 100 °C), and the mean speed (10, 20, and 30 m/s) are each varied in turn, for both smooth and rough discs. Parameter uncertainty is quantified using the residual-resampling bootstrap (BIG) established in a companion paper and applied over 105 iterations; it yields near-Gaussian, weakly correlated parameter distributions. The three HAF parameters are then expressed as linear functions of load, temperature, speed, and roughness; least-squares inference across the fourteen conditions shows that eleven of the fifteen regression coefficients differ significantly from zero at the 5% level, with roughness having the strongest effect on the friction level (t = 7.98). Substituting these laws into the HAF equation and reoptimizing the resulting expression globally yields a single closed-form model that reproduces the measured friction coefficient with a residual spread of σ ≈ 0.001 in friction-coefficient units (R2 ≈ 0.996) and approximately Gaussian, zero-mean, and homoscedastic residuals with no evident systematic structure. Being differentiable and equipped with bootstrap confidence intervals, the model predicts friction throughout the tested operating envelope—across which the maximum friction coefficient varies by a factor of eight, from 0.0049 to 0.0388—and supports gradient-based optimization of low-friction operating conditions. The contribution of this study is a compact, interpretable, and statistically characterized predictive law for tooth friction, expressed in closed form as a function of the operating conditions and of the surface state.

  • Open Access

    A Phenomenological Model with Bootstrap-Based Uncertainty Estimation for Friction Coefficient Prediction in Gear Transmissions

    by Maxence Bigerelle, Julie Lemesle, Eddy Chevallier, Yasser Diab, Thomas Touret, Christophe Changenet, Fabrice Ville

    This study investigates the correlations between the parameters of the Hysteresis-Attrition-Friction model (HAF), hysteresis (h), attrition (a), and friction coefficient (ν), under different surface conditions and contact pressures. The HAF model, a sigmoidal model developed in-house, provides a novel approach for characterizing tribological behaviour through its three key parameters (h, a, ν). The analysis employed a bootstrapping method to generate numerous parameter samples, allowing for the estimation of joint distributions and the identification of correlations between parameter pairs. The model here is applied to data from experiments conducted using both smooth and rough surface configurations at three distinct contact pressures: 1.2 GPa, 1.6 GPa, and 1.9 GPa. The results revealed a positive correlation between hysteresis and attrition across both surface types, indicating that higher energy dissipation through hysteresis is associated with increased friction. Conversely, negative correlations were found between hysteresis and friction coefficient, and between attrition and friction, suggesting a trade-off between energy dissipation and friction. The bivariate kernel density plots further highlighted these patterns, helping to visualize the complex relationships within the model. The results emphasize the importance of considering surface conditions and pressure when applying the HAF model to predict performance in tribological systems.


  • Influence of oil flow rate and rotational speed on load-independent power losses in an oil-jet lubricated planetary gear set

    by Marie Winger, Yann Marchesse, Thomas Touret, Fabrice Ville, Christophe Changenet, Patrice Gédin

    This paper focuses on the study of the load-independent power losses generated by a complete planetary gearbox having a rotating ring gear and a fixed planet carrier. First, different configurations are studied to characterize the various losses such as those associated to bearings. The power losses generated by the complete gearbox is then measured thanks to a dedicated test bench. Those tests enable to determine a power loss distribution that is then validated using a thermal network analysis. Once the windage and the oil churning losses are estimated, their evolution with rotational speed and oil flow rate is investigated. The study reveals that the windage power losses, generated by the reduced scale planetary gearbox studied, do not increase with the cube of the rotational speed within the tested speed range. The oil churning losses evolve linearly with the oil flow rate and quasi linearly with speed. Finally, the evolution of the power loss distribution with respect to the rotational speed is presented.

  • Open Access

    The Use of Gas Dynamics to Estimate the Influence of Flanges on Gear Windage Power Loss

    by Thibaut Torres, Yasser Diab, Christophe Changenet, Thomas Touret, Bérengère Guilbert

    This study aims to develop a new model for windage losses, building upon existing formulation, complemented by dedicated experimental campaigns and a specific methodology designed to isolate and quantify windage losses. The model relies on an analytical approach to flow characterization, incorporating a correction factor accounting for air density reduction. The experimental investigation was carried out on a dedicated test bench and includes both spur and helical gears. The results demonstrate good agreement between the proposed model and the experimental data, with and without the presence of nearby obstacles, such as side flanges, highlighting the model’s robustness across different configurations. The proposed windage loss model reproduces the experimental results with significantly greater accuracy than the original one, yielding relative deviations below 5% compared to almost 20% for spur gears, and below 9% compared to over 21%, and in some cases up to 50%, for helical gears.

  • A new formulation for convective heat transfer in oil jet lubricated spur gears

    by Thibaut Torres, Christophe Changenet, Thomas Touret, Bérengère Guilbert

    This study aims to analyze thermal heat-transfer between an oil jet and a rotating spur gear using a novel experimental methodology 1 to have an analytical model based on lubrication conditions and geometric characteristics of spur gears. Based on existing theoretical formulations and advanced visualization techniques implemented on a test bench. The use of a high-speed image acquisition system allowed the identification of three distinct phases, depending on the gear rotational speed, which led to the development of the heat-transfer model. This research considers various types of spur gears to account for geometric variations and different lubrication conditions, namely different oil jet flow rates and/or nozzle diameters. These results provide a new perspective on understanding convective transfers in mechanical transmissions.


  • A new method to analyse temperature measurements and identify failure location in gear transmissions

    by Thomas Touret, Christophe Changenet, Fabrice Ville

    Temperature is a relevant indicator for gearbox health monitoring. Especially in an industrial context where the use of thermocouples and low frequency acquisition system can make this solution simple and cost effective compared to vibration or acoustic ones. Yet, this approach is less investigated in the scientific literature, compared to the dynamic ones. Consequently, this technique lacks specific indicator that can help the diagnostic of a faulty gearbox. In this study, a new indicator that can help locate failure in gearboxes is proposed. It is based on temperature measurements and model analyses through a novel methodology. It consists in: (i) the development of a thermal model of the system under consideration using the thermal network approach; (ii) the use of this model to simulate the faulted system thermal behaviour; (iii) the estimation of a novel fault signature derived from the simulations. Different fault locations are estimated to generate a database of possible defects; (iv) the estimation of a thermal signature for the faulty mechanical system and (v) the comparison of both the experimental and simulated signatures to identify defect localisation. The proposed indicator appears relevant to identify gear failure location in gearbox. For two type of gear defects, the thermal signature estimated from the measurements matches the theoretical thermal signature from the numerical model. The proposed thermal signature approach can be used as a powerful indicator to be used with classical diagnostic methods to identify defect location in geared transmissions.

  • Open Access

    Investigations on Spin Power Losses Generated in a Planetary Gear Set Using Thermal Network Method

    by Marie Winger, Yann Marchesse, Thomas Touret, Christophe Changenet, Fabrice Ville, Patrice Gédin

    This paper introduces an experimental approach to study the distribution of power losses in an oil jet-lubricated planetary gear set, with the aim of increasing the efficiency of these gearboxes. A thermal model is developed to estimate power losses associated with temperature distribution. This model is applied to analyze experimental data collected from a dedicated test setup. Different configurations are studied to progressively validate the thermal network. In this paper, only a configuration composed of a rotating ring gear and a fixed planet carrier is studied. This configuration enables the validation of a thermal network developed from a basic configuration where power loss sources are not numerous. The study reveals that, for this configuration, load-independent power losses are primarily attributed to hydrodynamic losses in the bearings, while the gear windage effects are of second order. The power losses are then compared to those generated by the same planetary gear set but using a rotating planet carrier. The comparison shows that the configuration composed of the rotating ring gear and fixed planet carrier produces less power loss than the other configuration.


  • Open Access

    Power Losses of Oil-Bath-Lubricated Ball Bearings—A Focus on Churning Losses

    by Florian de Cadier de Veauce, Yann Marchesse, Thomas Touret, Christophe Changenet, Fabrice Ville, Luc Amar, Charlotte Fossier

    This study investigates the power losses of rolling element bearings (REBs) lubricated using an oil bath. Experimental tests conducted on two different deep-groove ball bearings (DGBBs) provide valuable insights into the behaviour of DGBBs under different oil levels, generating essential data for developing accurate models of power losses. Observations of the oil bath dynamics reveal the formation of an oil ring at high oil levels, as observed for planetary gear trains, leading to modifications in the oil flow behaviour. The experiments demonstrate that oil bath lubrication generates power losses comparable to injection lubrication when the oil level is low. However, as the oil level increases, so do the power losses due to increased drag within the bearing. This study presents a comprehensive model for calculating drag losses. The proposed drag power loss model accounts for variations in oil level and significantly improves loss predictions. A comparison of existing models with the experimental results shows good agreement for both bearings, demonstrating the effectiveness of the developed model in accounting for oil bath height in loss calculations.


  • Tooth friction in spur gear transmission. From local to mean tooth friction loss

    by Yasser Diab, Thomas Touret, Fabrice Ville, Christophe Changenet

    In a gear transmission, power losses come from a variety of sources, classified as load-dependent and no-load-dependent losses. No-load-dependent losses are the ones that remain constant regardless of the applied load, such as losses due to drag in rolling element bearings, seals, churning and/or windage for gears. Load-dependent losses include friction losses due to sliding and rolling between gear teeth. These losses are particularly important in some gear transmissions because of their direct impact on overall efficiency and thermal behaviour. Consequently, knowledge of the friction coefficient associated to this loss is of major interest for optimising gears (geometry, surface finish, lubrication, etc.). In this article, a new method is proposed for predicting the mechanical efficiency losses associated with the mean coefficient of friction for pairs of cylindrical gears. It is based on a model developed previously to estimate the instantaneous tooth friction along the plane of action in gears. This model takes into account the lubricant shear and the friction on contacting asperities. The proposed mean friction coefficient is deduced from the instantaneous friction coefficient using specific calculations, particularly at the pitch point. To verify the method, the estimated results are compared with those in the literature calculated for gears and operating conditions common on FZG test rigs.


  • A method to develop a high-fidelity gearbox thermal model based on limited temperature measurements

    by Antonin Monot, Thomas Touret, Christophe Changenet, Fabrice Ville, Thierry Grandgeorge, Frederic Fayolle