Investigation of radiation shielding properties of CeO2 thin films prepared at different molarities

Authors:
Open Access
Publisher website
Google Scholar
Abstract
In this study, CeO2 thin films were produced using the spin coting method, which is one of the sol–gel methods, in six different molarities. X-ray diffraction (XRD) patterns revealed the characteristic peaks of the films, while Field Emission Scanning Electron Microscopy (FESEM) confirmed their homogeneous structure. Then, radiation shielding parameters like linear absorption coefficient (LAC), mass absorption coefficient (MAC), tent value layer (TVL), mean free path (MFP), and half value layer (HVL) were thoroughly examined. The results showed that increasing molarity had a significant effect on the thickness values of thin films and the absorption parameters were found to improve with increasing molarity. Both LAC and MAC values decrease as the energy level increases, but the increase in CeO2 molarity leads to a strong increase on these coefficients. The HVL value was also found to be 0.42 cm at the lowest energy of 14.957 keV and to be around 10 cm at the greatest energy of 59.543 keV (0.05 M). When the radiation energy applied to the material was raised from 14.957 keV to 59.543 keV, it was found that the MFP values of 0.05 M CeO2 thin films grew gradually from 0.61 cm to 14.51 cm. High energy radiation of 59.543 keV and a low density (0.05 M) medium resulted in peak TVL values of 33.423 cm, allowing the radiation to pass through the material with minimal interaction.
Funding Information
  • The Scientific and Technological Research Council of Türkiye (121C375)

This publication has 50 references indexed in Scilit: