Effect of Microstructural Arrangement on Mechanical Behaviour of 3D Printed Polyamide
Preprint
- 8 November 2023
- preprint
- Published by MDPI AG in Preprints.org
Abstract
This study aims at relating the microstructural arrangement, in particular the symmetry materialised by filament sequencing in fused filament fabrication process on mechanical behaviour of printed polyamide. Dogbone structures are printed using various printing temperatures, which are combined with part orientation and raster angle that represent the in-plane and out-of-plane symmetrical arrangement of filament. Mechanical testing is conducted on both as-received filaments and printed structures to derive the effect of filament arrangement symmetry and process-generated defects on mechanical loss. In addition, microstructural analysis using scanning electron microscopy is used to share more light on the filament arrangement and their consequence on deformation mechanisms with respect to the printing conditions. The results show that 3D printed polyamide-based material exhibit remarkable tensile performance with strain stiffening behaviour and large elongation at break thanks to particular filament layout. Among the considered printing conditions, the part orientation is found to have the largest influence on tensile behaviour, which modulates the behaviour from complete restoration of the filament performance to mechanical loss.Keywords
All Related Versions
- Version 1, 2023-11-08, Preprints
- Published version: Symmetry, 15 (12), 2119.
This publication has 11 references indexed in Scilit:
- Additively manufactured materials and structures: A state-of-the-art review on their mechanical characteristics and energy absorptionInternational Journal of Mechanical Sciences, 2023
- Fused filament fabrication: A state-of-the-art review of the technology, materials, properties and defectsInternational Journal on Interactive Design and Manufacturing (IJIDeM), 2022
- A review on 3D printing: An additive manufacturing technologyMaterials Today: Proceedings, 2022
- Mechanical properties of thermoplastic parts produced by fused deposition modeling:a reviewRapid Prototyping Journal, 2021
- On the Tensile Behaviour of Bio-Sourced 3D-Printed Structures from a Microstructural PerspectivePolymers, 2020
- The impact of defects on tensile properties of 3D printed parts manufactured by fused filament fabricationMaterials Today Communications, 2019
- Material extrusion of plant biopolymers: Opportunities & challenges for 3D printingAdditive Manufacturing, 2018
- Fused filament 3D printing of ionic polymer-metal composites (IPMCs)Smart Materials and Structures, 2015
- Additive Manufacturing of Custom Orthoses and Prostheses – A ReviewProcedia CIRP, 2015
- Anisotropic material properties of fused deposition modeling ABSRapid Prototyping Journal, 2002