Lotfi Hedjazi
Lotfi Hedjazi has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Nicolas Stephant
Institut des Matériaux de Nantes Jean Rouxel (IMN), Nantes Université, UMR 6502 CNRS, Nantes, 44322 France
2 shared publications - Sofiane Belhabib
Université de Nantes, Oniris, CNRS, GEPEA, UMR 6144, F-44000 Nantes, France
2 shared publications - Sofiane Guessasma
UR1268 Biopolymères Interactions Assemblages, INRAE, F-44316 Nantes, France
2 shared publications - Sylvie Durand
INRAE, Research Unit BIA UR1268, Rue Geraudiere, F-44316 Nantes, France
2 shared publications - Ali Attajer
Institut de Recherche de la Construction (IRC), École Spéciale des Travaux Publics (ESTP), 28 Avenue du Président Wilson, 94230 Cachan, France
1 shared publication - Julien Gardan
Faculty of Engineering, Lebanese University, Beirut P.O. Box 6573/14, Lebanon
1 shared publication
Latest Publications
- Open Access
- 23 February 2025
- Published by International Council for Research and Innovation in Building and Construction in Journal of Information Technology in Construction
- Vol. 30 (5) , 92-112
Additive manufacturing in construction: state of the art and emerging trends in civil engineering
For decades, there has been an increasing interest in the development of Additive Manufacturing (AM) in both the construction industry and civil engineering. The rapid evolution of this field requires a review to maintain a global vision. This has led to the emergence of large robotic arm and gantry systems capable of printing building components using various materials such as concrete, including supplementary cementitious materials or natural fibres. Other less recent technologies, such as Fused Deposition Modelling and Laminated Object Manufacturing contribute to the production of components for construction. AM offers several advantages including automated production processes and design flexibility for complex geometry. This article provides an overview of the current state of AM in construction, including an examination of engineering and AM processes, concretes and reinforced materials, advanced materials, and the development of new applications. Additionally, the article discusses recent standards for 3D Concrete Printing. It is aimed at those seeking a comprehensive understanding of AM and its applications in construction 5.0.
- 23 February 2025
- Published by International Council for Research and Innovation in Building and Construction in Journal of Information Technology in Construction
- Vol. 30 (5) , 92-112
Open AccessAdditive manufacturing in construction: state of the art and emerging trends in civil engineering
For decades, there has been an increasing interest in the development of Additive Manufacturing (AM) in both the construction industry and civil engineering. The rapid evolution of this field requires a review to maintain a global vision. This has led to the emergence of large robotic arm and gantry systems capable of printing building components using various materials such as concrete, including supplementary cementitious materials or natural fibres. Other less recent technologies, such as Fused Deposition Modelling and Laminated Object Manufacturing contribute to the production of components for construction. AM offers several advantages including automated production processes and design flexibility for complex geometry. This article provides an overview of the current state of AM in construction, including an examination of engineering and AM processes, concretes and reinforced materials, advanced materials, and the development of new applications. Additionally, the article discusses recent standards for 3D Concrete Printing. It is aimed at those seeking a comprehensive understanding of AM and its applications in construction 5.0.
- Open Access
Effects of Microstructural Arrangement on the Mechanical Behavior of 3D Printed Polyamide
This study aims to relate the microstructural arrangement, in particular the symmetry materialized by filament sequencing in the fused filament fabrication process, to the mechanical behavior of printed polyamide. Dog-bone structures were printed using various printing temperatures ranging from 250 °C to 280 °C, which were combined with part orientation including vertical, horizontal, and lateral configurations and raster angles (0°, 15°, 30°, and 45°) that represent the in-plane and out-of-plane symmetrical arrangement of the filament. Mechanical testing was conducted on both as-received filaments and printed structures to derive the effects of filament arrangement symmetry and process-generated defects on mechanical loss. In addition, a microstructural analysis using scanning electron microscopy was used to share more light on the filament arrangements and their consequence on the deformation mechanisms with respect to the printing conditions. The results showed that the 3D printed polyamide-based materials exhibited remarkable tensile performance with strain stiffening behavior and large elongation at break due to their particular filament layout. Among the considered printing conditions, the part orientation was found to have the largest influence on the tensile behavior, which modulates the behavior from complete restoration of the filament performance to mechanical loss.
Open AccessEffects of Microstructural Arrangement on the Mechanical Behavior of 3D Printed Polyamide
This study aims to relate the microstructural arrangement, in particular the symmetry materialized by filament sequencing in the fused filament fabrication process, to the mechanical behavior of printed polyamide. Dog-bone structures were printed using various printing temperatures ranging from 250 °C to 280 °C, which were combined with part orientation including vertical, horizontal, and lateral configurations and raster angles (0°, 15°, 30°, and 45°) that represent the in-plane and out-of-plane symmetrical arrangement of the filament. Mechanical testing was conducted on both as-received filaments and printed structures to derive the effects of filament arrangement symmetry and process-generated defects on mechanical loss. In addition, a microstructural analysis using scanning electron microscopy was used to share more light on the filament arrangements and their consequence on the deformation mechanisms with respect to the printing conditions. The results showed that the 3D printed polyamide-based materials exhibited remarkable tensile performance with strain stiffening behavior and large elongation at break due to their particular filament layout. Among the considered printing conditions, the part orientation was found to have the largest influence on the tensile behavior, which modulates the behavior from complete restoration of the filament performance to mechanical loss.
- Open Access
- 8 November 2023
- Published by MDPI AG in Preprints.org
Effect of Microstructural Arrangement on Mechanical Behaviour of 3D Printed Polyamide
This study aims at relating the microstructural arrangement, in particular the symmetry materialised by filament sequencing in fused filament fabrication process on mechanical behaviour of printed polyamide. Dogbone structures are printed using various printing temperatures, which are combined with part orientation and raster angle that represent the in-plane and out-of-plane symmetrical arrangement of filament. Mechanical testing is conducted on both as-received filaments and printed structures to derive the effect of filament arrangement symmetry and process-generated defects on mechanical loss. In addition, microstructural analysis using scanning electron microscopy is used to share more light on the filament arrangement and their consequence on deformation mechanisms with respect to the printing conditions. The results show that 3D printed polyamide-based material exhibit remarkable tensile performance with strain stiffening behaviour and large elongation at break thanks to particular filament layout. Among the considered printing conditions, the part orientation is found to have the largest influence on tensile behaviour, which modulates the behaviour from complete restoration of the filament performance to mechanical loss.
- 8 November 2023
- Published by MDPI AG in Preprints.org
Open AccessEffect of Microstructural Arrangement on Mechanical Behaviour of 3D Printed Polyamide
This study aims at relating the microstructural arrangement, in particular the symmetry materialised by filament sequencing in fused filament fabrication process on mechanical behaviour of printed polyamide. Dogbone structures are printed using various printing temperatures, which are combined with part orientation and raster angle that represent the in-plane and out-of-plane symmetrical arrangement of filament. Mechanical testing is conducted on both as-received filaments and printed structures to derive the effect of filament arrangement symmetry and process-generated defects on mechanical loss. In addition, microstructural analysis using scanning electron microscopy is used to share more light on the filament arrangement and their consequence on deformation mechanisms with respect to the printing conditions. The results show that 3D printed polyamide-based material exhibit remarkable tensile performance with strain stiffening behaviour and large elongation at break thanks to particular filament layout. Among the considered printing conditions, the part orientation is found to have the largest influence on tensile behaviour, which modulates the behaviour from complete restoration of the filament performance to mechanical loss.