Stability and reproducibility of the amperometric sensors for oxygen concentration analysis in the nitrogen gas mixtures
Open Access
- 12 March 2024
- journal article
- research article
- Published by Ural Federal University in Electrochemical Materials and Technologies
- Vol. 3 (1) , 20243027
Abstract
The paper presents experimentally obtained results on the long-term stability tests of the solid electrolyte amperometric sensor output signal during the operation in the O2 + N2 gas mixtures. These data prove the stability and reproducibility of the output signal when measuring the oxygen concentration in air for 8000 hours. The output signal variation during the tests did not exceed ± 2 %. We performed four heating / cooling cycles of different durations, which did not influence either sensor integrity or operation characteristics. The structure of the solid electrolyte sensor and the solid electrolyte/electrode interfacial layer remained unchanged during the tests. Dynamic characteristics of the sensor, including the response time, were stable.Keywords
This publication has 33 references indexed in Scilit:
- Dual chamber YSZ-based sensor for simultaneous measurement of methane and water vapor concentrations in CH4 + H2O + N2 gas mixturesJournal of Solid State Electrochemistry, 2022
- Improved performances of oxygen potentiometric sensor by electrochemical activationJournal of Solid State Electrochemistry, 2012
- Solid-state potentiometric gas sensors—a supplementJournal of Solid State Electrochemistry, 2009
- Solid-state electrochemical gas sensorsIonics, 2009
- New advanced in situ carbon monoxide sensor for the process applicationIonics, 2008
- Solid-state potentiometric gas sensors—current status and future trendsJournal of Solid State Electrochemistry, 2008
- A new hydrogen sensor for molten aluminumSensors and Actuators B: Chemical, 1993
- A new type of mixed potential sensor using a thick film of beta-aluminaSensors and Actuators B: Chemical, 1993
- Solid state potentiometric oxygen gas sensorsJournal of Applied Electrochemistry, 1986
- Carbon monoxide gas sensor made of stabilized zirconiaSolid State Ionics, 1980