Cu@Sn Core–Shell Structure Powder Preform for High-Temperature Applications Based on Transient Liquid Phase Bonding
Authors:
- 26 February 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 32 (1) , 441-451
Abstract
This paper presents a novel die-attach material for high-temperature applications based on transient liquid phase (TLP) bonding. Cu particles are electroless plated with Sn to achieve Cu@Sn structure, and the fabricated Cu@Sn particles are compressed into preforms for die attachment. This material can be reflowed at a low temperature (<260 °C) due to the low melting temperature of the outer Sn layer. However, after reflow soldering, the resulting interconnections can withstand a high temperature of at least 415 °C, with the entire outer Sn layer transforming into Cu−Sn intermetallic compounds (IMCs) with high remelting temperatures. The formed bondlines exhibit good electrical and thermal conductivity due to the low porosity and the embedded Cu particles in the interconnections. A large shear strength at 400 °C can be achieved with the high-remelting Cu−Sn IMCs in the interconnections. Furthermore, the interconnections also exhibit excellent reliability under thermal shock cycling from −55 to 200 °C. The I – V curve and breakdown voltages of the novel preform-bonded IGBTs are measured to examine the interconnection quality compared with those of Cu−Sn TLP-bonded IGBTs. This die-attach material is suitable for power devices operating under high temperatures or other harsh environments.Keywords
Funding Information
- National Natural Science Foundation (51375116)
- Shenzhen Special Funds for Overseas High-level Talents (KQC201109020053A)
- Shenzhen Special Funds for Strategic Emerging Industries (JCYJ20140417172417135)
- Shenzhen Funds for Supporting National and Provincial Plans (GJHS20120627112429510)
This publication has 33 references indexed in Scilit:
- Fracture of Sn-Ag-Cu Solder Joints on Cu Substrates. II: Fracture Mechanism MapJournal of Electronic Materials, 2011
- Sn–Zn low temperature solderJournal of Materials Science: Materials in Electronics, 2006
- Nanoindentation measurements of the mechanical properties of polycrystalline Au and Ag thin films on silicon substrates: Effects of grain size and film thicknessMaterials Science and Engineering: A, 2006
- Young’s modulus of (Cu, Ag)–Sn intermetallics measured by nanoindentationMaterials Science and Engineering: A, 2004
- Nanoindentation measurements on Cu–Sn and Ag–Sn intermetallics formed in Pb-free solder jointsJournal of Materials Research, 2003
- A comparison of different evaluation methods in modulated temperature DSCThermochimica Acta, 1995
- Characterization of eutectic Sn-Bi solder jointsJournal of Electronic Materials, 1992
- Kinetics of interfacial reaction in bimetallic CuSn thin filmsActa Metallurgica, 1982
- Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal ConductivityJournal of Applied Physics, 1961
- Measurement of Sheet Resistivities with the Four-Point ProbeBell System Technical Journal, 1958