Evaluation of mechanical properties of novel GLARE laminates filled with nanoclay
- 14 May 2021
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 42 (8) , 4015-4028
Abstract
In this research work, we have investigated the effect of nanoclay fillers in the epoxy adhesive on improving the interfacial adhesion and the mechanical properties of glass‐reinforced aluminum laminates. The laminates were prepared with a varying weight percentage of nanoclay fillers (i.e., 3, 4, and 5 wt%) in the epoxy resin using the hand lay‐up method. During the tensile test, the laminate's anisotropic nature was investigated using the samples cut in different orientations to the rolling direction (i.e., 0, 45, and 90°). The flexural, lap shear, and impact tests were conducted as per ASTM standards. After each test, the failure mechanisms of laminates were studied using the scanning electron microscope. The results showed that 3 wt% of nanoclay added in the epoxy enhanced the laminates' overall mechanical properties than other composites. The fiber metal laminates (FML) containing the nano clay more than 3 wt% showed deterioration in the mechanical property due to the improper distribution of nanoclay in the epoxy matrix. The FML's mechanical properties with nano clay filler were compared with other fillers' performance in the previous studies. It was found that the mechanical properties of FML with nano clay filler were more significant than others.Keywords
This publication has 23 references indexed in Scilit:
- Epoxy reinforcement with silicate particles: Rheological and adhesive properties – Part I: Characterization of composites with natural and organically modified montmorillonitesInternational Journal of Adhesion and Adhesives, 2015
- Effects of surface treatment of aluminium alloy 1050 on the adhesion and anticorrosion properties of the epoxy coatingApplied Surface Science, 2015
- Characterization of Carbon Fiber Reinforced Epoxy Composites Modified with Nanoclay and Carbon NanotubesProcedia Engineering, 2015
- A novel process for cost effective manufacturing of fiber metal laminate with textile reinforced pCBT composites and aluminum alloyComposite Structures, 2014
- Nano-disassembling method—A new method for preparing completely exfoliated epoxy/clay nanocompositesApplied Clay Science, 2012
- A review: Fibre metal laminates, background, bonding types and applied test methodsMaterials & Design (1980-2015), 2011
- Use of carbon nanotubes reinforced epoxy as adhesives to join aluminum platesMaterials & Design (1980-2015), 2010
- Surface treatment of titanium for adhesive bonding to polymer composites: a reviewInternational Journal of Adhesion and Adhesives, 2001
- The effect of adhesive bonding between aluminum and composite prepreg on the mechanical properties of carbon-fiber-reinforced metal laminatesComposites Science and Technology, 1997
- Review of surface pretreatments for titanium alloysInternational Journal of Adhesion and Adhesives, 1995