Heat Transfer and Flow Characteristics of Channel Impingement Cooling Structure at Leading Edge Inside Turbine Blades Using Large Eddy Simulation
- 4 March 2024
- journal article
- research article
- Published by ASME International in ASME Journal of Heat and Mass Transfer
- Vol. 146 (5) , 1-37
Abstract
As a main part of multichannel wall jet cooling structure, channel impingement cooling is a cooling strategy of great concern at the leading edge inside of the turbine blade. In this paper, heat transfer and flow behavior in the channel impingement cooling structure are investigated by large eddy simulation (LES). The results imply that impingement created by curvature-induced centrifugal instabilities in the turning region of the cooling channel is dominated by a streamwise vortex system containing a counter-rotating Dean vortex, which presents high heat transfer streaks along the streamwise direction on the target wall. The intensely unsteady nature of the cooling jet induced by a lack of equilibrium between the pressure gradient and the centrifugal force is precisely captured herein by LES. An attaching-wall jet formed on the outer wall downstream of the cooling channel has highly three-dimensional characteristics not observed by Reynolds-averaged Navier–Stokes equations (RANS). Heat transfer augmentation on the target wall of the cooling channel is mainly due to the intensifying streamwise vortex system developing in the turning region as driven by the centrifugal force. This research work will provide a reference for the optimization and application of multichannel wall jet cooling for gas turbine blades.Keywords
This publication has 36 references indexed in Scilit:
- Experimental and numerical studies on enhanced effusion cooling with shallowly dimpled film holes on double-wall structure surfaceInternational Journal of Heat and Fluid Flow, 2023
- Large eddy simulation of pulsed film cooling with vortex generatorsInternational Journal of Heat and Mass Transfer, 2021
- Experimental study of swirling flow characteristics in a semi cylinder vortex cooling configurationExperimental Thermal and Fluid Science, 2020
- Cooling methods for gas turbine blade leading edge: Comparative study on impingement cooling, vortex cooling and double vortex coolingInternational Communications in Heat and Mass Transfer, 2019
- Local heat transfer of vortex cooling with multiple tangential nozzles in a gas turbine blade leading edge cooling passageInternational Journal of Heat and Mass Transfer, 2018
- Numerical investigations of impingement cooling performance on flat and non-flat targets with dimple/protrusion and triangular ribInternational Journal of Heat and Mass Transfer, 2018
- Experimental and numerical study of the anti-crossflows impingement cooling structureInternational Journal of Heat and Mass Transfer, 2013
- Turbulence and Transition ModellingERCOFTAC Series, 1996
- Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger designInternational Journal of Heat and Mass Transfer, 1981
- Vortex methods for flow simulationJournal of Computational Physics, 1980