The thermal safety of lithium-ion batteries is a major challenge for large-scale applications. Although usually assumed safe, lithium solid-state batteries can still undergo thermal runaway as a result of highly exothermic redox reactions between the lithium metal anode and the oxygen from decomposed cathode oxide active material 1 . The current strategy for battery safety evaluation often applies to the large-format (i.e., at least several Ah) cells 2,3 , which can be costly and less informative to the material-scale research. Therefore, an early-scale material-level thermal safety evaluation is beneficial for the development of new battery chemistry sets. We have developed a methodology of using differential scanning calorimetry (DSC) to evaluate the thermal behaviors of a combined anode-cathode-electrolyte (ACE) sample 4 . The thermal metrics of the ACE sample in the temperature range of 40-500°C can be quantified, including the onset temperatures of exothermic reactions, the heat release rate, and the cumulative heat. A hypothetical reaction pathway is constructed by following mass-energy balances of the ACE samples and the above-mentioned metrics to help understand the complex reactions in the cell at elevated temperatures. In this work, we developed a milligram-scale ACE sample of lithium metal anode, NMC811 cathode, and LLZO solid electrolyte to provide insight on the NMC811 solid state battery. We studied samples both with and without liquid electrolyte. The thermal behavior of the ACE sample was examined with DSC to construct a hypothetical reaction pathway. We found that the total heat reaches 2500-3500 J/g NMC811 in a NMC811/LLZO/Li ACE sample with the onset temperature of the first exothermic peak at ~220°C. We also found that adding liquid electrolytes can cause a higher total heat release (3500-4500 J/g NMC811 ), an earlier onset temperature of 180°C, and more stochastic reaction pathways. Finally, we provide comparisons of the thermal behaviors of the NMC811/LLZO/Li chemistry with and without liquid electrolyte to other chemistries of interest (e.g., related Li-ion chemistries). References: (1) Bates, A.; Preger, Y.; Torres-Castro, L.; Harrison, K.; Harris, S.; Hewson, J. Are Solid-State Batteries Safer than Lithium-Ion Batteries? JOULE 2022 , 6 (4), 742–755. (2) Bates, A.; Torres-Castro, L.; Albertus, P.; Mukherjee, P. P.; Jeevarajan, J.; Johnson, N.; Bhargava, B.; Wang, Z.; Ogundipe, T.; Vishnugopi, B. S.; Karmakar, A.; Tang, W. S. A Multi-Scale Framework for Advancing Battery Safety Through Early Calorimetric Analysis of Materials and Components. The Electrochemical Society Interface 2024 , 33 (3), 69. (3) Yang, S.-J.; Hu, J.-K.; Jiang, F.-N.; Cheng, X.-B.; Sun, S.; Hsu, H.-J.; Ren, D.; Zhao, C.-Z.; Yuan, H.; Ouyang, M.; Fan, L.-Z.; Huang, J.-Q.; Zhang, Q. Oxygen-Induced Thermal Runaway Mechanisms of Ah-Level Solid-State Lithium Metal Pouch Cells. eTransportation 2023 , 18 , 100279. (4) Bhargava, B.; Johnson, N. B.; Bates, A. M.; Torres-Castro, L.; Albertus, P. Methods for Quantitative Thermal Analysis of Lithium Solid-State and Beyond Battery Safety. Journal of The Electrochemical Society 2024 , 171 (11), 110525.