ABAlex Martin Bates

Alex Martin Bates

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alex Martin Bates has a total of 61 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • (Invited) Exposing the Flammability of Solid-State Batteries: Thermite Reactions in Action

    by Mohamad Siblani, Marc Bertrand, Nathan Brenner Johnson, Liling Jin, Patrice Chartrand, Alex Martin Bates, Loraine Torres-Castro, Mickael Dolle

    Lithium-metal all-solid-state batteries (LiSSBs) have emerged as a promising solution for meeting the energy-density and safety requirements of advanced technologies, particularly electric vehicles (EVs). Because they contain no liquid electrolytes, these batteries were long believed to be inherently safer and non-flammable. However, recent findings challenge this assumption, showing that even solid electrolytes can ignite in the presence of lithium metal. Surprisingly, one critical aspect has been largely overlooked: the potential for a thermite-type reaction between the Li-metal anode and the cathode.

  • Evaluation of Advanced Sensors for Early Thermal Runaway Detection in Scaled Electric Vehicle Packs

    by Vivian Tran, Alex Martin Bates, Lucas Gray, Minori Yoshida, Dennis Marquez, Armando Montoya, Jacob Mueller, Emily Kowalchuk, Jill Langendorf, Loraine Torres-Castro

    Early detection of thermal runaway (TR) in electric vehicle (EV) battery packs is challenging due to system scale. Sparse temperature sensing and voltage-signal averaging across parallel-connected cells make conventional methods slow and unreliable for detecting single-cell failures. In recent years, more advanced sensors have been proposed for early TR detection. These include a variety of gas sensors to detect off-gassing and vent gas emissions preceding TR and rapid electrochemical impedance spectroscopy (EIS) to detect early electrochemical changes within cells [1, 2]. However, experimental validation has largely been focused on cell and small module configurations.

  • Analysis of Iron Manganese Nickel Oxide/Hard Carbon Na-Ion Battery Degradation Modes and Mechanisms

    by Reed M Wittman, Matthieu Dubarry, David Anseán, Peter M Attia, Melissa L Meyerson, Chaz Rich, Jill Langendorf, Amariah Condon, Alex Martin Bates

    Since the start of Sandia’s study on commercially available Na-ion batteries, more suppliers have entered the Na-ion battery market. However, the ability of these new systems to serve as drop-in replacements for Li-ion technologies has yet to be fully evaluated. Initial results from our cycling study of Na-ion cells, featuring a sodium iron manganese nickel oxide (Na(FexMnyNiz)O) positive electrode and a hard carbon negative electrode from two different manufacturers, were obtained by cycling at various temperatures and C rates. These results indicated that the first generation of cells we purchased was not ready for widespread commercial adoption. After 300 cycles, all cells from both manufacturers reached 80% of their initial capacity, with many cells dropping below 40% capacity. This suggests that the first generation of cells is unsuitable for broad commercial use in high-intensity applications. Initial materials characterization revealed that both cells had similar chemistries, with only minor differences in electrolyte composition and operating ranges, suggesting shared origins for the high degradation rate. Both cells exhibited similar sensitivities to temperature and discharge rate, with lower temperatures accelerating degradation. Discharge rates did not show clear trends during cycling for either cell. XCT analysis of the cycled cells indicates significant deformation of the jelly roll in most cases, with some cells exhibiting substantial cracking of the electrode material. We will present data from postmortem teardown analysis of the cells, including XRD, SEM, ICP-OES, and XPS analyses of the electrodes, to determine the degradation modes that occurred during cycling. Additionally, we will present initial results from our survey of the cycling performance of various cells purchased eighteen months after acquiring the first generation, to assess changes in manufacturing quality. SNL is managed and operated by NTESS under DOE NNSA contract DE-NA0003525. SAND2025-04498A This material is based upon work supported by the U.S. Department of Energy, Office of Electricity (OE), Energy Storage Division.

  • Early-Stage Thermal Safety Evaluation of NMC811/LLZO/Li Batteries with and without Liquid Electrolyte Using Differential Scanning Calorimetry

    by Zixuan Wang, Paul Albertus, Bhuvsmita Bhargava, Nathan Brenner Johnson, Alex Martin Bates, Loraine Torres-Castro

    The thermal safety of lithium-ion batteries is a major challenge for large-scale applications. Although usually assumed safe, lithium solid-state batteries can still undergo thermal runaway as a result of highly exothermic redox reactions between the lithium metal anode and the oxygen from decomposed cathode oxide active material 1 . The current strategy for battery safety evaluation often applies to the large-format (i.e., at least several Ah) cells 2,3 , which can be costly and less informative to the material-scale research. Therefore, an early-scale material-level thermal safety evaluation is beneficial for the development of new battery chemistry sets. We have developed a methodology of using differential scanning calorimetry (DSC) to evaluate the thermal behaviors of a combined anode-cathode-electrolyte (ACE) sample 4 . The thermal metrics of the ACE sample in the temperature range of 40-500°C can be quantified, including the onset temperatures of exothermic reactions, the heat release rate, and the cumulative heat. A hypothetical reaction pathway is constructed by following mass-energy balances of the ACE samples and the above-mentioned metrics to help understand the complex reactions in the cell at elevated temperatures. In this work, we developed a milligram-scale ACE sample of lithium metal anode, NMC811 cathode, and LLZO solid electrolyte to provide insight on the NMC811 solid state battery. We studied samples both with and without liquid electrolyte. The thermal behavior of the ACE sample was examined with DSC to construct a hypothetical reaction pathway. We found that the total heat reaches 2500-3500 J/g NMC811 in a NMC811/LLZO/Li ACE sample with the onset temperature of the first exothermic peak at ~220°C. We also found that adding liquid electrolytes can cause a higher total heat release (3500-4500 J/g NMC811 ), an earlier onset temperature of 180°C, and more stochastic reaction pathways. Finally, we provide comparisons of the thermal behaviors of the NMC811/LLZO/Li chemistry with and without liquid electrolyte to other chemistries of interest (e.g., related Li-ion chemistries). References: (1) Bates, A.; Preger, Y.; Torres-Castro, L.; Harrison, K.; Harris, S.; Hewson, J. Are Solid-State Batteries Safer than Lithium-Ion Batteries? JOULE 2022 , 6 (4), 742–755. (2) Bates, A.; Torres-Castro, L.; Albertus, P.; Mukherjee, P. P.; Jeevarajan, J.; Johnson, N.; Bhargava, B.; Wang, Z.; Ogundipe, T.; Vishnugopi, B. S.; Karmakar, A.; Tang, W. S. A Multi-Scale Framework for Advancing Battery Safety Through Early Calorimetric Analysis of Materials and Components. The Electrochemical Society Interface 2024 , 33 (3), 69. (3) Yang, S.-J.; Hu, J.-K.; Jiang, F.-N.; Cheng, X.-B.; Sun, S.; Hsu, H.-J.; Ren, D.; Zhao, C.-Z.; Yuan, H.; Ouyang, M.; Fan, L.-Z.; Huang, J.-Q.; Zhang, Q. Oxygen-Induced Thermal Runaway Mechanisms of Ah-Level Solid-State Lithium Metal Pouch Cells. eTransportation 2023 , 18 , 100279. (4) Bhargava, B.; Johnson, N. B.; Bates, A. M.; Torres-Castro, L.; Albertus, P. Methods for Quantitative Thermal Analysis of Lithium Solid-State and Beyond Battery Safety. Journal of The Electrochemical Society 2024 , 171 (11), 110525.

  • Open Access

    How Safe Are Solid-State Batteries? Identifying Hazards with a Bottom-Up Approach

    by Albuquerque Sandia National Laboratories (Snl-Nm), Nathan Johnson, Alex Bates, Loraine Torres-Castro

  • Are Solid State Batteries Non-Flammable?

    by Marc Bertrand, Nathan Brenner Johnson, Liling Jin, Alex Martin Bates, Patrice Chartrand, Loraine Torres-Castro, Mickael Dolle

    Lithium metal all-Solid-State Batteries (LiSSB) are the focus of extensive research activity in energy storage given their potential to meet the energy and safety requirements of advanced applications such as electric vehicles (EVs). With no liquid electrolyte present, these batteries were considered safer and non-flammable. However, recent studies have demonstrated that even solid electrolytes can ignite in the presence of lithium metal. Until now, very little research has addressed the stability between lithium and active materials. We have identified a concerning area that has been largely overlooked regarding the Li-metal anode: the thermite reaction. Through thermodynamic modelling and experimental validation our study reveals that a thermite reaction occurs between the Li-metal anode and the LFP cathode, generating temperatures up to 2,500°C, high enough to vaporize pure lithium in an inert environment. We anticipate this reaction will also occur with NMC and LNMO cathodes, potentially leading to even higher temperature increases. The thermite reaction triggers spontaneously at 500°C with poor surface contact, while increasing surface contact through mixing initiates the reaction at room temperature in an inert environment. Despite its fast kinetics, this reaction is transport-limited due to lithium passivation, leading to long burn times and reignition risks. Given the risk of lithium metal contacting the cathode during failure, understanding these reactions is crucial for ensuring the safe deployment of LiSSBs.

  • (Invited) Diagnostics for Early Detection of Thermal Runaway in Electric Vehicle Batteries

    by Loraine Torres-Castro, Alex Martin Bates, Nathan Brenner Johnson

    Lithium-ion battery (LIB) failures can occur abruptly under a variety of conditions, including during charging, active operation, or even while at rest. Current battery management systems (BMS) are often inadequate in detecting the onset of thermal runaway until failure is imminent, which can leave electric vehicle occupants with insufficient warning times and limited intervention options. This highlights the urgent need for advanced diagnostic methods that can provide early warnings of LIB failures. The abuse of battery cells—stemming from factors such as rapid charging, manufacturing defects, or environmental stresses—can significantly impact the state of stability (SoS) of the cells. SoS is a comprehensive assessment of a cell's health and safety, encompassing potential failure modes and structural integrity throughout the battery's lifecycle. Traditional BMS technology primarily relies on monitoring temperature and voltage as a function of state of charge to establish cell SoS. However, this approach proves inadequate under abusive conditions, as it often fails to detect early degradation markers until catastrophic failure is imminent. The voltage profile of LIBs typically remains uniform until just before failure, making it challenging to identify critical changes in cell condition. Once significant deviations in voltage or temperature are observed, thermal runaway is often unavoidable, with few effective means of suppression or mitigation available. Electrochemical Impedance Spectroscopy (EIS) presents a promising avenue for assessing the SoS of electrochemical cells and battery packs. However, its application has been historically limited by the requirement for a pseudo-linear steady-state system, as dynamic changes in temperature or voltage can introduce noise and distort data. This limitation has constrained EIS to time-consuming full spectral measurements conducted on stationary batteries or single-frequency assessments that yield limited diagnostic insights. To address these challenges, researchers have developed a specialized impedance measurement tool capable of capturing impedance spectra at multiple discrete frequencies within ten to fifteen-second intervals. This rapid collection of EIS data is crucial for accurately establishing failure markers and enabling EIS to function as an onboard diagnostic tool. However, the effectiveness may diminish when transitioning from single cells to multi-cell packs, necessitating the integration of non-electrochemical diagnostics to enhance SoS assessments. Non-electrochemical diagnostics, particularly gas sensing, can provide valuable early warning signals, especially in large battery packs containing hundreds or thousands of cells. During thermal runaway, detectable gases typically include volatile organic compounds from electrolyte solvents, carbon dioxide, and hydrogen. The combination of gas sensing and rapid EIS has the potential to offer early warnings through effective SoS monitoring, thereby preventing catastrophic failures. In this study, we evaluate commercial gas sensors alongside rapid EIS to identify warning times for battery cells subjected to thermal and electrical abuse. The signals obtained from rapid EIS and gas sensing are correlated with live sampling conducted using Fourier Transform Infrared Spectrometry and Mass Spectrometry. This comprehensive gas analysis provides deeper insights into the failure mechanisms of abused cells and establishes a technical foundation for diagnostics that could be employed to monitor the SoS of both individual cells and entire battery packs. Throughout our experiments, we identify specific markers in the EIS and gas sensor data that correspond to the onset of unstable conditions. These markers could be integrated into a BMS or utilized to assess the SoS of batteries with unknown conditions. Identifying diagnostic tools that can pinpoint failure markers with sufficient lead time for intervention is critical for minimizing the consequences of LIB failures and enhancing the overall safety of electric vehicles. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia LLC, a wholly owned subsidiary of Honeywell International Inc. for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525. SAND2024-16692A

  • (Invited) Multiscale Safety Evaluation of Beyond Li-Ion Systems

    by Alex Martin Bates, Loraine Torres-Castro, Jill Langendorf, Nathan Brenner Johnson, Jessica Kustas, Mark Rodriguez, Chaz Rich

    The transition to commercialization of room-temperature, rechargeable batteries is accelerating, with new solutions such as solid-state and sodium-ion batteries always on the horizon. However, the safety characteristics of many emerging battery technologies remain insufficiently understood. This talk will address the gap by presenting findings from safety testing conducted on commercially available 18650 cells, alongside materials-scale analysis using samples ≤4 mm in diameter. Safety testing encompassed a range of temperature, mechanical, and electrical abuse conditions, including nail penetration, crush tests, external short circuits, overcharging, and overtemperature scenarios. Materials-scale degradation was characterized using techniques such as differential scanning calorimetry and thermogravimetric analysis, providing critical insights into reaction pathways and safety implications for next-generation energy storage systems.

  • How Safe Are Solid-State Batteries? Identifying Hazards with a Bottom-up Approach

    by Nathan Brenner Johnson, Alex Martin Bates, Loraine Torres-Castro

    With the growing need for high energy density batteries, lithium metal solid state batteries (LiSSB) have emerged as a promising candidate to achieve high performance metrics and cost-effectiveness. Additionally, LiSSBs boasted improved safety due to the replacement of flammable liquid electrolyte with non-flammable solids. However, this assumption of inherent improved safety has come into question. Different battery material sets present unique hazards that must be individually addressed. The early identification of unique hazards and failure mechanisms in prospective materials is critical for preventing safety-related setbacks and enabling swift and effective commercialization of next generation batteries. In this work, the thermal stability and hazards of promising LiSSBs and other next generation batteries are assessed through a multi-scale approach beginning at the materials level. The safety profiles of these prospective battery material sets are benchmarked against modern lithium-ion batteries. Through early hazard identification, mitigation strategies and inherently safer materials can be developed in parallel to performance metrics of next generation batteries, thereby enabling safe-by-design batteries.

  • Open Access

    Joint State and Parameter Estimation for Batteries Considering Input Noise Compensation

    by Albuquerque Sandia National Laboratories (Snl-Nm), Rodrigo Trevizan, Other (Dot), Usdoe National Nuclear Security Administration (Nnsa), Victoria Obrien, Loraine Torres-Castro, Alex Bates