Effect of Teak Wood Flour on Melt Rheological Behaviour of High Density Polyethylene
Authors:
- 22 March 2010
- journal article
- research article
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 49 (4) , 418-425
Abstract
The melt rheological studies on HDPE/TWF (teak wood flour) composites were studied at (volume fraction) Φf = 0.00−0.32 and at 180°C, 190°C and 200°C. Viscosity of HDPE/TWF composites increases with Φf while decreases with increase in temperature. Addition of coupling agent, maleic anhydride grafted HDPE (HDPE-g-MAH) enhances viscosity as compared to the corresponding HDPE/TWF. This was attributed to increase in interaction between TWF and HDPE by HDPE-g-MAH which in turn stiffens the system. The power law coefficient, n, decreases with increase in Φf and increase in temperature and lower for HDPE/TWF/HDPE-g-MAH composites as compared to HDPE/TWF composites. The consistency index increases with increase in Φf and were higher for HDPE/TWF/HDPE-g-MAH.Keywords
This publication has 24 references indexed in Scilit:
- Mechanical properties of teak wood flour‐reinforced HDPE compositesJournal of Applied Polymer Science, 2009
- Mechanical properties of HDPE/bark flour compositesJournal of Applied Polymer Science, 2007
- Effect of wood fibers on the rheological properties of i‐PP/wood fiber compositesJournal of Applied Polymer Science, 2003
- High pressure capillary rheometry of polymeric fluidsPolymer, 2000
- Influence of wood flour on the mechanical properties of polyethyleneJournal of Applied Polymer Science, 1986
- Melt rheology and extrudability of polyethylenesPolymer Engineering & Science, 1985
- Rheological behavior of highly filled polymer meltsPolymer Engineering & Science, 1983
- Morphology, crystallization and melting behaviour of films of isotactic polypropylene blended with ethylene-propylene copolymers and polyisobutylenePolymer, 1982
- Effects of coupling agents on the rheological properties, processability, and mechanical properties of filled polypropylenePolymer Engineering & Science, 1981
- Rheological properties of calcium carbonate-filled polypropylene meltsJournal of Applied Polymer Science, 1974