A 72-dB SNDR 130-MS/s 0.8-mW Pipelined-SAR ADC Using a Distributed Averaging Correlated Level Shifting Ring Amplifier
- 25 August 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 57 (12) , 3794-3803
Abstract
This article presents a 14-b 130-MS/s two-stage pipelined-SAR analog-to-digital converter (ADC) using a distributed averaging correlated level shifting (DACLS) ring amplifier as its residue amplifier (RA). Compared to the prior CLS and ACLS techniques that reduce the RA gain error due to their finite open-loop gain, the proposed DACLS ring amplifier no longer requires an extra level-shifting capacitor ( $C_{\mathrm {LS}}$ ) at the RA output, such that the RA bandwidth can be improved. Furthermore, instead of a single-level shift in the prior arts, the DACLS ring amplifier provides an option for multiple level shifts and thereby accomplishes a greater RA gain error reduction. In addition, a customized bypass-window scheme is applied, which can skip some power-wasting digital-to-analog converter (DAC) switchings by window detection and thus reduces the power consumption of the ADC. To reduce the bit-cycling time of the SAR conversion, a delay-reduced (DR) SAR logic is introduced to increase the ADC speed. The ADC chip is fabricated in 28-nm CMOS technology and occupies an active area of 0.013 mm2. At 130-MS/s and the Nyquist-rate input frequency, the measured SNDR is 72.5 dB, while the power consumption is only 0.82 mW. Without any calibration, the proposed ADC achieves a Walden and a Schreier figure-of-merit (FoM) of 1.8 fJ/conversion step and 181.5 dB, respectively. Compared to the prior-art ADCs with an input bandwidth ≥ 40 MHz and a SNDR > 68 dB, this work shows the best FoMs.Keywords
Funding Information
- Ministry of Science and Technology (MOST) of Taiwan
This publication has 10 references indexed in Scilit:
- A Calibration-Free 14-b 0.7-mW 100-MS/s Pipelined-SAR ADC Using a Weighted- Averaging Correlated Level Shifting TechniqueIEEE Journal of Solid-State Circuits, 2020
- 9.5 A 13.5b-ENOB Second-Order Noise-Shaping SAR with PVT-Robust Closed-Loop Dynamic Amplifier2020
- A 75.3-dB SNDR 24-MS/s Ring Amplifier-Based Pipelined ADC Using Averaging Correlated Level Shifting and Reference Swapping for Reducing Errors From Finite Opamp Gain and Capacitor MismatchIEEE Journal of Solid-State Circuits, 2019
- A 1.25-GS/s 7-b SAR ADC With 36.4-dB SNDR at 5 GHz Using Switch-Bootstrapping, USPC DAC and Triple-Tail Comparator in 28-nm CMOSIEEE Journal of Solid-State Circuits, 2018
- A calibration-free 2.3 mW 73.2 dB SNDR 15b 100 MS/s four-stage fully differential ring amplifier based SAR-assisted pipeline ADC2017
- A 10 bit 320 MS/s Low-Cost SAR ADC for IEEE 802.11ac Applications in 20 nm CMOSIEEE Journal of Solid-State Circuits, 2015
- A 1 mW 71.5 dB SNDR 50 MS/s 13 bit Fully Differential Ring Amplifier Based SAR-Assisted Pipeline ADCIEEE Journal of Solid-State Circuits, 2015
- A 3.1 mW 8b 1.2 GS/s Single-Channel Asynchronous SAR ADC With Alternate Comparators for Enhanced Speed in 32 nm Digital SOI CMOSIEEE Journal of Solid-State Circuits, 2013
- Design of a Split-CLS Pipelined ADC With Full Signal Swing Using an Accurate But Fractional Signal Swing OpampIEEE Journal of Solid-State Circuits, 2010
- An Over-60 dB True Rail-to-Rail Performance Using Correlated Level Shifting and an Opamp With Only 30 dB Loop GainIEEE Journal of Solid-State Circuits, 2008