Jia-Ching Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jia-Ching Wang has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Tai-Haur Kuo
Department of Electrical Engineering, National Cheng Kung University (NCKU), Tainan, Taiwan
2 shared publications - Tsung-Chih Hung
Department of Electrical Engineering, National Cheng Kung University (NCKU), Tainan 70101, Taiwan
1 shared publication
Latest Publications
- 25 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 57 (12) , 3794-3803
A 72-dB SNDR 130-MS/s 0.8-mW Pipelined-SAR ADC Using a Distributed Averaging Correlated Level Shifting Ring Amplifier
This article presents a 14-b 130-MS/s two-stage pipelined-SAR analog-to-digital converter (ADC) using a distributed averaging correlated level shifting (DACLS) ring amplifier as its residue amplifier (RA). Compared to the prior CLS and ACLS techniques that reduce the RA gain error due to their finite open-loop gain, the proposed DACLS ring amplifier no longer requires an extra level-shifting capacitor ( $C_{\mathrm {LS}}$ ) at the RA output, such that the RA bandwidth can be improved. Furthermore, instead of a single-level shift in the prior arts, the DACLS ring amplifier provides an option for multiple level shifts and thereby accomplishes a greater RA gain error reduction. In addition, a customized bypass-window scheme is applied, which can skip some power-wasting digital-to-analog converter (DAC) switchings by window detection and thus reduces the power consumption of the ADC. To reduce the bit-cycling time of the SAR conversion, a delay-reduced (DR) SAR logic is introduced to increase the ADC speed. The ADC chip is fabricated in 28-nm CMOS technology and occupies an active area of 0.013 mm2. At 130-MS/s and the Nyquist-rate input frequency, the measured SNDR is 72.5 dB, while the power consumption is only 0.82 mW. Without any calibration, the proposed ADC achieves a Walden and a Schreier figure-of-merit (FoM) of 1.8 fJ/conversion step and 181.5 dB, respectively. Compared to the prior-art ADCs with an input bandwidth ≥ 40 MHz and a SNDR > 68 dB, this work shows the best FoMs.
- 25 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 57 (12) , 3794-3803
A 72-dB SNDR 130-MS/s 0.8-mW Pipelined-SAR ADC Using a Distributed Averaging Correlated Level Shifting Ring Amplifier
This article presents a 14-b 130-MS/s two-stage pipelined-SAR analog-to-digital converter (ADC) using a distributed averaging correlated level shifting (DACLS) ring amplifier as its residue amplifier (RA). Compared to the prior CLS and ACLS techniques that reduce the RA gain error due to their finite open-loop gain, the proposed DACLS ring amplifier no longer requires an extra level-shifting capacitor ( $C_{\mathrm {LS}}$ ) at the RA output, such that the RA bandwidth can be improved. Furthermore, instead of a single-level shift in the prior arts, the DACLS ring amplifier provides an option for multiple level shifts and thereby accomplishes a greater RA gain error reduction. In addition, a customized bypass-window scheme is applied, which can skip some power-wasting digital-to-analog converter (DAC) switchings by window detection and thus reduces the power consumption of the ADC. To reduce the bit-cycling time of the SAR conversion, a delay-reduced (DR) SAR logic is introduced to increase the ADC speed. The ADC chip is fabricated in 28-nm CMOS technology and occupies an active area of 0.013 mm2. At 130-MS/s and the Nyquist-rate input frequency, the measured SNDR is 72.5 dB, while the power consumption is only 0.82 mW. Without any calibration, the proposed ADC achieves a Walden and a Schreier figure-of-merit (FoM) of 1.8 fJ/conversion step and 181.5 dB, respectively. Compared to the prior-art ADCs with an input bandwidth ≥ 40 MHz and a SNDR > 68 dB, this work shows the best FoMs.
- 21 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 55 (12) , 3271-3280
A Calibration-Free 14-b 0.7-mW 100-MS/s Pipelined-SAR ADC Using a Weighted- Averaging Correlated Level Shifting Technique
This article presents a 14-b 100-MS/s single-channel pipelined-successive-approximation register (SAR) ADC using a weighted-averaging correlated level shifting (WACLS) technique. For a closed-loop residue amplification, the error voltage due to the finite operational amplifier (opamp) gain can be ideally removed by the proposed WACLS technique with a low-gain opamp. In addition, the opamp bandwidth degradation, by an extra level-shift capacitor (CLS) in two-phase amplification CLS-based circuits, can be relaxed and minimized in WACLS. Furthermore, a speed-enhancement scheme is provided to alleviate the speed degradation owing to one extra amplification phase and long bit-cycling time from two-phase amplification and SAR circuits, respectively. A modified reference swapping (RS) technique is applied to diminish the capacitor mismatch error without any calibration. A quick startup ring amplifier design is introduced for duty-cycled control power saving. The chip is implemented in the 28-nm CMOS technology and occupies an active area of 0.018 mm². At 100 MS/s and Nyquist-rate input, the measured SNDR is 71.7 dB with 0.7-mW power consumption only. The calibration-free ADC achieves Walden and Schreier figure-of-merit of 2.2 fJ/conversion-step and 180.2 dB, respectively. Compared with the prior-art ADCs with sampling frequency > 100 MS/s and SNDR > 65 dB, this work advances the state-of-the-art by 3x and 5.3 dB, respectively.
- 21 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 55 (12) , 3271-3280
A Calibration-Free 14-b 0.7-mW 100-MS/s Pipelined-SAR ADC Using a Weighted- Averaging Correlated Level Shifting Technique
This article presents a 14-b 100-MS/s single-channel pipelined-successive-approximation register (SAR) ADC using a weighted-averaging correlated level shifting (WACLS) technique. For a closed-loop residue amplification, the error voltage due to the finite operational amplifier (opamp) gain can be ideally removed by the proposed WACLS technique with a low-gain opamp. In addition, the opamp bandwidth degradation, by an extra level-shift capacitor (CLS) in two-phase amplification CLS-based circuits, can be relaxed and minimized in WACLS. Furthermore, a speed-enhancement scheme is provided to alleviate the speed degradation owing to one extra amplification phase and long bit-cycling time from two-phase amplification and SAR circuits, respectively. A modified reference swapping (RS) technique is applied to diminish the capacitor mismatch error without any calibration. A quick startup ring amplifier design is introduced for duty-cycled control power saving. The chip is implemented in the 28-nm CMOS technology and occupies an active area of 0.018 mm². At 100 MS/s and Nyquist-rate input, the measured SNDR is 71.7 dB with 0.7-mW power consumption only. The calibration-free ADC achieves Walden and Schreier figure-of-merit of 2.2 fJ/conversion-step and 180.2 dB, respectively. Compared with the prior-art ADCs with sampling frequency > 100 MS/s and SNDR > 65 dB, this work advances the state-of-the-art by 3x and 5.3 dB, respectively.