A Design of Ambient RF Energy Harvester with Sensitivity of −21 dBm and Power Efficiency of a 39.3% Using Internal Threshold Voltage Compensation
Authors:
- Danial KhanDKDanial Khan
- Hamed AbbasizadehHAHamed Abbasizadeh
- Sang-Yun KimSKSang-Yun Kim
- Zaffar Hayat Nawaz KhanZKZaffar Hayat Nawaz Khan
- Syed Adil Ali ShahSSSyed Adil Ali Shah
- Young Gun PuYPYoung Gun Pu
- Keum Cheol HwangKHKeum Cheol Hwang
- Youngoo YangYYYoungoo Yang
- Minjae LeeMLMinjae Lee
- Kang-Yoon LeeKang-Yoon Lee
Open Access
Abstract
In this paper, a low-power reconfigurable ambient Radio Frequency to Direct Current power (RF–DC) converter using an internal threshold voltage cancellation (IVC) scheme with an auxiliary transistors block is presented. A maximum power point tracking (MPPT) algorithm is implemented in order to maintain the high efficiency by automatically selecting the number of stages. The proposed reconfigurable converter efficiently converts the RF signals to DC voltage by dynamically controlling the threshold voltage of the forward and reversed-biased transistors in the primary rectification body. During positive half-cycle, the proposed RF–DC converter reduces the voltage drop across the forward-biased transistors, which results in increased harvested power and output DC voltage. During negative half cycle, the proposed rectifier minimizes the reverse leakage current and prevents the loss of energy stored in the prior stages. A five-stage internal threshold compensated power converter is designed in 0.18 µm Complementary Metal-Oxide-Semiconductor (CMOS) technology with an active die area of 360 µm × 160 µm, while the Maximum Power Point Tracking (MPPT) occupies an active die area of 730 µm × 280 µm. The proposed scheme obtains maximum post-simulated power conversion efficiency (PCE) of 39.3% when input power level is −15 dBm and produces an output voltage of 3.3 V for a load of 1 MΩ and at a frequency of 900 MHz. The proposed scheme achieves a voltage sensitivity of 1V at a remarkably low input power of −21 dBm for a 1 MΩ load.Keywords
This publication has 17 references indexed in Scilit:
- A 3.2 V –15 dBm Adaptive Threshold-Voltage Compensated RF Energy Harvester in 130 nm CMOSIEEE Transactions on Circuits and Systems I: Regular Papers, 2015
- Hybrid Forward and Backward Threshold-Compensated RF-DC Power Converter for RF Energy HarvestingIEEE Journal on Emerging and Selected Topics in Circuits and Systems, 2014
- An Antenna Co-Design Dual Band RF Energy HarvesterIEEE Transactions on Circuits and Systems I: Regular Papers, 2013
- New Analysis and Design of a RF Rectifier for RFID and Implantable DevicesSensors, 2011
- RF energy harvesting system and circuits for charging of mobile devicesIEEE Transactions on Consumer Electronics, 2010
- A Passive UHF RF Identification CMOS Tag IC Using Ferroelectric RAM in 0.35-$\mu{\hbox {m}}$ TechnologyIEEE Journal of Solid-State Circuits, 2006
- A New Transponder Architecture With On-Chip ADC for Long-Range Telemetry ApplicationsIEEE Journal of Solid-State Circuits, 2006
- Remotely powered addressable UHF RFID integrated systemIEEE Journal of Solid-State Circuits, 2005
- Fully integrated passive uhf rfid transponder ic with 16.7-μ minimum rf input powerIEEE Journal of Solid-State Circuits, 2003
- A new charge pump without degradation in threshold voltage due to body effect [memory applications]IEEE Journal of Solid-State Circuits, 2000