Microstructure, Elevated-Temperature Tribological Properties and Electrochemical Behavior of HVOF-Sprayed Composite Coatings with Varied NiCr/Cr3C2 Ratios and CoCrFeNiMo Additions
Open Access
Abstract
This study fabricated six types of NiCr–Cr3C2 composite coatings using high-velocity oxygen fuel (HVOF) spraying and systematically evaluated their tribological behavior at 350 °C and 500 °C, along with their electrochemical corrosion performance in 3.5 wt.% NaCl solution. The objective was to elucidate how compositional design regulates the coatings’ microstructure, mechanical properties, and service performance. Results indicate that the 75NiCr–25Cr3C2 coating (C) formed a stable oxide film under both temperatures, exhibiting oxidation-dominated wear and the lowest friction coefficient and wear rate. When the temperature increased from 350 °C to 500 °C, the wear rates of coatings C, B, E, and F decreased significantly. Notably, coatings E and F, which contained CoCrFeNiMo high-entropy alloy, showed more than a 50% reduction in wear rate, demonstrating the contribution of the high-entropy phase to high-temperature wear resistance. At 350 °C, coatings B, D, E, and F experienced primarily abrasive wear; at 500 °C, however, E and F shifted to oxidative wear as the dominant mechanism, leading to a marked improvement in wear resistance. Electrochemical measurements revealed that coating E exhibited the best corrosion resistance, while the NiCr coating (A) performed the worst. The findings highlight that optimizing Cr3C2 content and incorporating high-entropy alloy elements can synergistically enhance both high-temperature tribological properties and corrosion resistance.Keywords
Funding Information
- Key Research and Development Program Project of Jiangxi Province (20212BBE53044)
- Natural Science Foundation of Guangdong Province (2025A1515010944, 2022A1515010210)
- Science and Technology Research Project of Jiangxi Provincial Department of Education (GJJ2507504, GJJ2407707, GJJ2207510)
- City key laboratory of die surface treatment & manufacturing technology in Nanchang (2021-NCZDSY-003)
This publication has 49 references indexed in Scilit:
- High-Temperature Wear Behavior and Mechanisms of Self-Healing NiCrAlY-Cr3C2-Ti2SnC Coating Prepared by Atmospheric Plasma SprayingJournal of Thermal Spray Technology, 2024
- Influence of HVOF spraying parameters on microstructure and mechanical properties of FeCrMnCoNi high-entropy coatings (HECs)Journal of Materials Science, 2024
- Visualising the adsorption behaviour of sodium dodecyl sulfate corrosion inhibitor on the Mg alloy surface by a novel fluorescence labeling strategyApplied Surface Science, 2023
- Microstructural, Mechanical and Wear Properties of Atmospheric Plasma-Sprayed and High-Velocity Oxy-Fuel AlCoCrFeNi Equiatomic High-Entropy Alloys (HEAs) CoatingsJournal of Thermal Spray Technology, 2023
- High temperature wear performance of HVOF-sprayed Cr 3 C 2 -WC-NiCoCrMo and Cr 3 C 2 -NiCr hardmetal coatingsApplied Surface Science, 2017
- A Study of Cr3C2-Based HVOF- and HVAF-Sprayed Coatings: Microstructure and Carbide RetentionJournal of Thermal Spray Technology, 2017
- Structure and wear behavior of NiCr–Cr 3 C 2 coatings sprayed by supersonic plasma spraying and high velocity oxy-fuel technologiesApplied Surface Science, 2015
- High-temperature oxidation of HVOF thermally sprayed NiCr–Cr3C2 coatings: microstructure and kineticsJournal of Materials Science, 2015
- Corrosion Behavior of Bare, Cr3C2-25%(NiCr), and Cr3C2-25%(NiCr)+0.4%CeO2-Coated Superni 600 Under Molten Salt at 900 °CJournal of Materials Engineering and Performance, 2014
- Engineering HVOF-Sprayed Cr3C2-NiCr Coatings: The Effect of Particle Morphology and Spraying Parameters on the Microstructure, Properties, and High Temperature Wear PerformanceJournal of Thermal Spray Technology, 2012