Direct Fabrication of Diamond Films on β-Ga₂O₃ Using Q-carbon
Authors:
Preprint
- 27 February 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Beta gallium oxide (β-Ga₂O₃) is a promising ultrawide-bandgap (UWBG) semiconductor for high-power electronic devices. However, its low thermal conductivity critically limits device performance. While diamond integration can address thermal management, it suffers from challenges such as stress, decomposition, and surface energy mismatch. To overcome these difficulties, pulsed laser annealing is used to form a thin quenched carbon (Q-carbon) layer on β-Ga₂O₃, promoting diamond growth while preventing cracking, delamination, and oxide-layer degradation. Simulation results show a melt regrowth velocity of 12.5 m/s that enables Q-carbon/nanodiamond composite formation on β-Ga₂O₃. Using Q-carbon as a seed layer resulted in the formation of a high-quality, uniform diamond film with minimal graphitic content and a sharp T2g peak at 1332.6 cm⁻¹ with an FWHM of 9.28 cm⁻¹. Furthermore, Q-carbon helps minimize the thermal mismatch between the diamond and β-Ga₂O₃ films, thereby preventing delamination of the diamond film during post-deposition cooling. Stress in diamond/Q-carbon/β-Ga₂O₃ was reduced by ~70% compared to untreated diamond/β-Ga₂O₃ and ~75% compared to diamond/c-Al₂O₃. Additionally, Q-carbon boosts the formation of well-faceted five-fold twinned diamond crystals and accelerates the growth of columnar structure diamond film. This study successfully addresses a persistent challenge in diamond nucleation and the fabrication of high-quality, large-area diamond growth on β-Ga₂O₃.Keywords
This publication has 57 references indexed in Scilit:
- Surface zeta potential and diamond growth on gallium oxide single crystalCarbon, 2021
- Role of Q-carbon in nucleation and formation of continuous diamond filmCarbon, 2021
- Synthesis of multifunctional microdiamonds on stainless steel substrates by chemical vapor depositionCarbon, 2021
- Diamond film growth by HFCVD on Q-carbon seeded substrateCarbon, 2019
- Structural Evolution of Q-Carbon and NanodiamondsJOM, 2018
- Chemical mechanical polishing of thin film diamondCarbon, 2014
- The effect of twin plane spacing on the deformation of copper containing a high density of growth twinsJOM, 2008
- Surface Distribution of Stress State and Diamond Phases in [100] Oriented Diamond FilmsPhysica Status Solidi (a), 1999
- Studies on nucleation process in diamond CVD: an overview of recent developmentsDiamond and Related Materials, 1995
- A novel method for simulating laser-solid interactions in semiconductors and layered structuresMaterials Science and Engineering: B, 1989