Study on the Effect of Secondary Injection on the Combustion and Emission of N-Butanol Engine
Authors:
- Tianqi WangTWTianqi Wang
- Yaodong DuYDYaodong Du
- Zhe ZhaoZhe Zhao
- Yinan LiYLYinan Li
- Jufang ZhangJZJufang Zhang
- Tianyang GongTGTianyang Gong
Preprint
- 1 January 2022
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
N-butanol, as a biological alternative fuel containing oxygen, has similar physical and chemical properties to gasoline, and has a wide range of sources, which has attracted more and more attention and research. Direct injection technology has been widely used in the field of internal combustion engine due to its advantages of flexibility and control ability. In this paper, the secondary injection of n-butanol engine under the mode of in-cylinder direct injection is discussed to organize the stratified combustion of the mixture, optimize the combustion to improve the thermal efficiency and reduce the emission. A 4-cylinder four-stroke spark ignition(SI) engine was selected to carry out the secondary injection experiment of n-butanol under the excess air ratio(λ) of 1, engine speed of 1500r/min, and low load, and the variables were the second injection ratio and timing. The results show that the secondary injection of n-butanol can achieve stratified combustion of the mixture, but only at a specific second injection timing such as 100°CA BTDC or 125°CA BTDC the combustion effect is the best, small second injection ratio can optimize combustion, improve BTE, reduce HC and CO emissions. When the second injection ratio is greater than 60%, it results in incomplete fuel combustion, a 3% to 4% reduction in thermal efficiency and an increase in emissions. Coefficient of variations(COV) was increased by secondary injection, but the effect was insignificant in small injection ratio, and it will increase with the increase of second injection ratio.Keywords
This publication has 11 references indexed in Scilit:
- Combustion characteristics of a gasoline engine with independent intake port injection and direct injection systems for n-butanol and gasolineEnergy Conversion and Management, 2016
- Combustion process investigations in an optically accessible DISI engine fuelled with n-butanol during part load operationRenewable Energy, 2015
- Comparative study on alcohols–gasoline and gasoline–alcohols dual-fuel spark ignition (DFSI) combustion for high load extension and high fuel efficiencyEnergy, 2015
- An experimental database on the effects of single- and split injection strategies on spray formation and spark discharge in an optical direct-injection spark-ignition engine fuelled with gasoline, iso-octane and alcoholsInternational Journal of Engine Research, 2014
- Emission characteristics of a spark-ignition engine fuelled with gasoline-n-butanol blends in combination with EGRFuel, 2012
- Experimental study on performance and emissions of a high speed diesel engine fuelled with n-butanol diesel blends under premixed low temperature combustionFuel, 2012
- Study of turbocharged diesel engine operation, pollutant emissions and combustion noise radiation during starting with bio-diesel or n-butanol diesel fuel blendsApplied Energy, 2011
- Progress in the production and application of n-butanol as a biofuelRenewable and Sustainable Energy Reviews, 2011
- A comparative experimental and computational study of methanol, ethanol, and n-butanol flamesCombustion and Flame, 2010
- Effects of butanol–diesel fuel blends on the performance and emissions of a high-speed DI diesel engineEnergy Conversion and Management, 2010