Heat‐sealing and microscopic evaluation of paper‐based coated materials using various seal bar geometries in vertical form fill seal machine
Open Access
- 25 April 2023
- journal article
- research article
- Published by Wiley in Packaging Technology and Science
- Vol. 36 (8) , 667-679
Abstract
With the growing emphasis on minimization of global plastic waste, flexible fibre‐based packaging has gained significant interest over the past few years. Heat‐sealing technology is commonly applied for vertical form‐fill‐seal machine to provide tight closure of packages for maintaining food quality and shelf life. Several different seal bar geometries and adequate heat‐seal parameters are required to improve the seal tightness of the packages. This study aims to compare the heat sealability of thermoplastic film (OPP/PE) and paper‐based materials in vertical form‐fill‐seal machine using various seal bar profiles. The investigation includes seal strength measurement, understanding the causes of leak formation, seal tightness and inspection of the seal using scanning electron microscopy. Results reveal that OPP/PE material has exceptional seal strength and leakproof ability compared with paper‐based materials. However, it has limited operating window because the material shrinks and coarsens at approximately 140°C. Sealing temperature and dwell time are found to be the major factors affecting the seal strength of paper‐based material. Results reveal the PE‐coated papers exhibit nearly twice the seal strength compared with the dispersion‐coated paper. It was difficult to achieve good hot‐tack values with dispersion‐coated paper. During testing, all the paper‐based materials experience delamination and fibre tear, and its severity increases with the increasing material grammage. As plateau temperature is reached, the fibre delamination remains relatively constant. The serrated geometry of seal bar design plays a significant role in providing a satisfactory airtight seal, particularly around the pouch's layer jump. However, flat seal bar designs are not recommended for gas tight applications for paper‐based materials.Keywords
This publication has 13 references indexed in Scilit:
- Evaluation and optimization of seal behaviour through solid contamination of heat‐sealed filmsPackaging Technology and Science, 2019
- Methods for Analyzing the Structure of Creases in Heat Sealed Paperboard PackagesJournal of Applied Packaging Research, 2015
- The Effect of Flame Treatment on Surface Properties and Heat Sealability of Low‐Density Polyethylene CoatingPackaging Technology and Science, 2012
- Effects of flame and corona treatment on extrusion coated paper properties2011
- Effects of Liquid Contaminants on Heat Seal Strength of low‐density polyethylene FilmPackaging Technology and Science, 2011
- Modelling the Material Flow and Web Tension in the Vertical Form–Fill–Seal Packaging ProcessPackaging Technology and Science, 2011
- New ways to enhance the functionality of paperboard by surface treatment – a reviewPackaging Technology and Science, 2008
- Barrier properties and heat sealability/failure mechanisms of dispersion‐coated paperboardPackaging Technology and Science, 2002
- Heat sealing of semicrystalline polymer films. II. Effect of melting distribution on heat‐sealing behavior of polyolefinsJournal of Applied Polymer Science, 1994
- Heatsealability of Flexible Web Materials in Hot-Bar Sealing ApplicationsJournal of Plastic Film & Sheeting, 1989