Effect of Transverse Restraint on Welding Residual Stress in V-Groove Butt Welding
Open Access
Abstract
When evaluating the safety of steel structures, welding residual stress is used as the secondary load and if there is any restraint, the yield stress of the base material is used for secondary load, regardless of the size of the restraint. Of late, as the yield stress of members is increasing with the increase in the use of high-strength steels, the proportion of the residual welding stress in the total load during the evaluation of the safety of structures is increasing. Therefore, it is necessary to investigate the effect of the size of the restraint on the residual welding stress, determine reasonable residual stress according to the size of the restraint, and apply the residual stress as a secondary load. To investigate the effect of constraint conditions on residual welding stress, thermoelastic–plastic analysis was performed for different member thicknesses, yield stresses, and constraint sizes. The restraint did not affect the residual stress in the direction of the weld line but did affect the residual stress in the direction perpendicular to the weld line. The restraint moved the tensile stress to the compression stress in the direction perpendicular to the weld line at the first layer of the weld and moved the compression stress to the tensile stress at the middle and final layers of the weld. The change in residual stress was the largest in the middle of the weld.Keywords
Funding Information
- Chosun University (2020)
This publication has 18 references indexed in Scilit:
- A Study on the Evaluation of Transverse Residual Stress at the Multi-pass FCA Butt Weldment using FEAJournal of Welding and Joining, 2010
- A New Procedure to Measure Near Yield Residual Stresses Using the Deep Hole Drilling TechniqueExperimental Mechanics, 2008
- Development of Welding Distortion Analysis Method Using Residual Strain as Boundary ConditionMaterials Science Forum, 2008
- Engineering critical analyses to BS 7910 — the UK guide on methods for assessing the acceptability of flaws in metallic structuresInternational Journal of Pressure Vessels and Piping, 2000
- Welding Residual Stresses and Effects on Fracture in Pressure Vessel and Piping Components: A Millennium Review and BeyondJournal of Pressure Vessel Technology, 2000
- Prediction of Residual Stresses in Butt Welded Plates Using Inherent StrainsJournal of Engineering Materials and Technology, 1993
- A new finite element model for welding heat sourcesMetallurgical Transactions B, 1984
- Research on Intensity of Restraint and Reaction Stress in Welded JointsJournal of Zosen Kiokai, 1961
- Effect of Residual Stresses on the Behavior of Brittle Fracture PropagationJournal of Zosen Kiokai, 1960
- External Constraint and Shrinkage of Butt-welded Joints in the Erection of Assemblies on Building WayJournal of Zosen Kiokai, 1958