Effects of Thermal Cycling on Creep of SnAgCu Solder Joints
- 4 December 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (5) , 888-894
Abstract
The long-term life of properly optimized high-end microelectronics assemblies is commonly limited by fatigue of the solder joints. The most credible assessments of this rely on modeling-based extrapolation and generalization of accelerated test results. As the validity of extrapolations to long-term service can rarely if ever be verified experimentally, there is a strong need for mechanistically justified models. The models all rely on predictions of stresses, strains, and perhaps functions of those versus time and temperature in cycling. Finite-element-based predictions of these require the assumption of relatively complex constitutive relations capable of predicting inelastic strain rates under continuously varying stresses and temperatures. These are usually extracted from a series of creep or stress relaxation experiments and generalized under the implicit assumption that the inelastic deformation is dominated by dislocation creep. However, the resulting constitutive relations were recently shown to be strongly misleading. It was suggested that this is a result of the inelastic deformation at the stresses and temperatures of primary concern actually being dominated by dislocation core diffusion. This paper lends further support for this picture, showing additional contributions from diffusion on cycling induced dislocation structures to make for ongoing, usually nonmonotonic, variations in deformation rates from cycle to cycle. These effects are certain to have major consequences for modeling. In fact, it has been argued that the combination of wrong constitutive relations with a wrong damage function has led to a partial cancellation of errors across a limited parameter range, but that this cannot be counted on for more detailed predictions of accelerated test results and does not allow for interpretation of such results in terms of even qualitative trends in service.Keywords
Funding Information
- Binghamton University
This publication has 31 references indexed in Scilit:
- Recrystallization and Precipitate Coarsening in Pb-Free Solder Joints During Thermomechanical FatigueJournal of Electronic Materials, 2011
- Cyclic twin nucleation in tin-based solder alloysActa Materialia, 2010
- Effect of thermo-mechanically induced microstructural coarsening on the evolution of creep response of SnAg-based microelectronic soldersMaterials Science and Engineering: A, 2005
- Effect of Sample Size on the Solidification Temperature and Microstructure of SnAgCu Near Eutectic AlloysJournal of Materials Research, 2005
- Impression creep characterization of rapidly cooled Sn–3.5Ag soldersMaterials Science and Engineering: A, 2004
- The microstructure of Sn in near-eutectic Sn–Ag–Cu alloy solder joints and its role in thermomechanical fatigueJournal of Materials Research, 2004
- Creep behavior of eutectic Sn–Ag lead-free solder alloyJournal of Materials Research, 2002
- Characterisation of constitutive behaviour of SnAg, SnAgCu and SnPb solder in flip chip jointsSensors and Actuators A: Physical, 2002
- Impression creep and other localized testsMaterials Science and Engineering: A, 2002
- Impression and diffusional creep of anisotropic mediaJournal of Applied Physics, 1995