In Situ Two-Step Plasma Enhanced Atomic Layer Deposition of Ru/RuNx Barriers for Seedless Copper Electroplating
Authors:
- 1 January 2011
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 158 (4) , G97-G102
Abstract
The study prepared Ru/RuNx bilayer barriers on mesoporous SiO2 (mp-SiO2) dielectric layers for direct Cu electroplating applications using in situ two-step plasma-enhanced atomic chemical vapor deposition (PEALD). For the 5 nm thick Ru/RuNx bilayer deposited at 200°C, obvious thermal decomposition begins at temperatures lower than 400°C. Copper can be successfully electroplated on the as-deposited Ru/RuNx bilayer, and the Cu/Ru/RuNx/mp-SiO2 film stack can withstand thermal treatment at temperatures up to 500°C without significant physical and chemical degradations according to TEM and SIMS analyses. The study shows that the electroplated Cu layer behaves like a passivation layer that improves the thermal stability of the Ru/RuNx barrier during the thermal annealing. Pull-off tensile test shows that interfaces in the Cu/Ru/RuNx/mp-SiO2 film stack have good adhesion strength, but delamination occurs at the interface between the Ru/RuNx bilayer and the mp-SiO2 layer at 600°C, resulting in Cu and Ru diffusion into the dielectric layer. The study has demonstrated that the PEALD Ru/RuNx bilayer structure prepared using the in situ two-step approach is suitable for the seedless Cu electroplating process in nanometer scale interconnect technology.Keywords
This publication has 18 references indexed in Scilit:
- Amorphous RuW Film as a Diffusion Barrier for Advanced Cu MetallizationJournal of the Electrochemical Society, 2010
- Enhancement of Electrochemical Capacitance Using Ni-Modified Carbon Nanofibers Prepared by a Hydrothermal ProcessJournal of the Electrochemical Society, 2010
- Pore sealing of mesoporous silica low-k dielectrics by oxygen and argon plasma treatmentsMicroelectronic Engineering, 2009
- Thermal and Electrical Properties of PVD Ru(P) Film as Cu Diffusion BarrierMicroelectronic Engineering, 2009
- Low Temperature Two-Step Atomic Layer Deposition of Tantalum Nitride for Cu Diffusion BarrierJournal of the Electrochemical Society, 2009
- Barrier Characteristics of ZrN Films Deposited by Remote Plasma-Enhanced Atomic Layer Deposition Using Tetrakis(diethylamino)zirconium PrecursorJapanese Journal of Applied Physics, 2007
- Microstructural Evolution of Annealed Ruthenium–Nitrogen FilmsElectrochemical and Solid-State Letters, 2007
- Diffusion Studies of Copper on Ruthenium Thin FilmElectrochemical and Solid-State Letters, 2004
- PEALD of a Ruthenium Adhesion Layer for Copper InterconnectsJournal of the Electrochemical Society, 2004
- Microstructure and reliability of copper interconnectsIEEE Transactions on Electron Devices, 1999