Mechanical properties and microstructure evolution of KD‐SA SiC f /BN/SiC CMCs oxidized at different temperatures
- 7 February 2024
- journal article
- research article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 21 (3) , 2183-2195
Abstract
Silicon carbide fiber‐reinforced SiC ceramic matrix composites (SiC f /SiC CMCs) based on a domestic KD‐SA SiC fiber were exposed to a wet oxygen atmosphere for 135 h at 800, 1100, and 1300°C. The evolution of the microstructure and mechanical properties of SiC f /SiC CMCs have been systematically investigated following oxidation. For weight change, CMC‐1300 showed the greatest gain (0.394%), followed by CMC‐1100 (0.356%) and CMC‐800 (0.149%). The volatilization of boron oxide (B 2 O 3 ) combined with the slight oxidation of the SiC matrix at 800°C caused crack deflection and fiber pull‐out. The complete dissipation of the interphase could be found when the oxidation temperature increases to 1100°C, generated a fracture surface with brittle fracture characteristics. At 1300°C, crystalline SiO 2 hindered oxygen diffusion, with evidence of fiber pull‐out. Based on thermodynamic calculations and microscopic observations, we propose a mechanism to explain the thermal degradation of SiC f /SiC CMCs. This work offers valuable guidance for the fabrication of SiC f /SiC CMCs that are suitable for high‐temperature applications.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFB3707700)
- National University of Defense Technology (WDZC20235250503)
This publication has 33 references indexed in Scilit:
- Effect of oxidation treatment on KD–II SiC fiber–reinforced SiC compositesCeramics International, 2017
- Mechanical properties of SiC f /SiC composites with alternating PyC/BN multilayer interfacesAdvances in Applied Ceramics: Structural, Functional and Bioceramics, 2017
- Thermo-mechanical properties of C/SiC composite structure under extremely high temperature environment up to 1500 °CComposites Part B: Engineering, 2016
- Mechanical properties of SiCf/SiC composites with PyC and the BN interfaceCeramics International, 2015
- Microstructural Evolution of Silica on Single‐Crystal Silicon Carbide. Part I: Devitrification and Oxidation RatesJournal of the American Ceramic Society, 2009
- Self-healing mechanisms of a SiC fiber reinforced multi-layered ceramic matrix composite in high pressure steam environmentsJournal of the European Ceramic Society, 2007
- Experimental design in the deposition of BN interface coatings on SiC fibers by chemical vapor depositionSurface and Coatings Technology, 2006
- High‐Temperature Oxidation of Boron Nitride: II, Boron Nitride Layers in CompositesJournal of the American Ceramic Society, 1999
- Kinetics and Mechanisms of Oxidation of 2D Woven C/SiC Composites: II, Theoretical ApproachJournal of the American Ceramic Society, 1994
- Oxygen transport through glass layers formed by a gel processJournal of Non-Crystalline Solids, 1984