Combined Optic-Acoustic Monitoring of Combustion in a Gas Turbine
Open Access
- 6 July 2020
- journal article
- research article
- Published by MDPI AG in International Journal of Turbomachinery, Propulsion and Power
- Vol. 5 (3) , 15
Abstract
The need for better combustion monitoring in gas turbines has become more acute with the latest technical requirements, standards, and policies in terms of safety, environment, efficiency, operation flexibility, and operation costs. Combustion Bay One e.U. and FH JOANNEUM GmbH initiated in 2015 an experimental research program about the feasibility and first assessments of placing optical systems near the combustor. The project’s acronym “emootion” stands for “Engine health MOnitOring and refined combusTION control based on optical diagnostic techniques embedded in the combustor”. The motivation of the project is twofold. On one side, one wants to exploit the radiative feature of the flame and to transform it into a piece of reliable information about the combustion status. On the other side, this information can be useful in terms of data interpretation or data reconciliation with other information coming from other sensors such as temperature probes, fast pressure probes, or accelerometers. The focus is put on several aspects of combustor operations: on detection of the flame, on monitoring of the ignition process, on a quality assessment of combustion based on its spectral contents (including soot formation), and on the detection of possible combustion instabilities. Promising results were obtained using photodiodes that offer an adequate trade-off between narrow-band sensitivity and signal time response. It is shown that it is convenient to combine a fast-pressure sensor with an optical sensor in a compact form; this combination has led to the so-called Rayleigh Criterion Probe (RCP). The split in red, green, and blue (RGB) light components and their further analysis allows for mapping the different types of operation. Regarding the probe packaging aspect, it is discussed that the level of light collection needed to keep an acceptable signal-to-noise ratio has been so far a restraint for the use of optical fibres. Solutions are proposed to bring the optical sensor as close as possible to the optical interface and to make it operational and reliable in prevailing heat. This contribution closes with a description of the pressure tests in a new combustion facility built for this purpose. A compact and portable combustion monitoring system including at least 3 RCPs can become an instrumentation standard within the next decade.Keywords
Funding Information
- Österreichische Forschungsförderungsgesellschaft (850470, 861004)
This publication has 19 references indexed in Scilit:
- Forcing Pulsations by Means of a Siren for Gas Turbine ApplicationsInternational Journal of Turbomachinery, Propulsion and Power, 2020
- Combustion Process Analysis and Diagnostic Using Optical Flame Scanners in Front-Fired Pulverized Coal BoilerJournal of Energy Resources Technology, 2018
- Long wavelength infrared radiation thermometry for non-contact temperature measurements in gas turbinesInfrared Physics & Technology, 2017
- Characterization of Combustion Chemiluminescence: An Image Processing ApproachProcedia Technology, 2014
- On the spectral bands measurements for combustion monitoringCombustion and Flame, 2011
- Numerical evaluation of equivalence ratio measurement using OH∗ and CH∗ chemiluminescence in premixed and non-premixed methane–air flamesCombustion and Flame, 2009
- Flame colour characterization in the visible and infrared spectrum using a digital camera and image processingMeasurement Science and Technology, 2008
- Chemiluminescence sensor for local equivalence ratio of reacting mixtures of fuel and air (FLAMESEEK)Applied Thermal Engineering, 2004
- Influence of pulsed entries on a spray generated by an air-blast injection device: An experimental analysis on combustion instability processes in aeroenginesProceedings of the Combustion Institute, 2002
- An experimental estimation of mean reaction rate and flame structure during combustion instability in a lean premixed gas turbine combustorProceedings of the Combustion Institute, 2000