Evaluation of Corrosion Resistance of Corrosion Inhibitors for Concrete Structures by Electrochemical Testing in Saturated Ca(OH)2Solutions with NaCl and Na2SO4
Open Access
- 15 April 2019
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2019, 1-11
Abstract
Reinforcing steel maintains passivity in an alkaline concrete environment. However, the passive film on the steel can be destroyed as the concrete becomes acidic, which could induce the corrosion of reinforcing steel. Carbonates and sulfates destroy the concrete matrix and accelerate the penetration of hazardous ions, thereby deteriorating the structure. To alleviate the corrosion of internal reinforcing steel within concrete, corrosion inhibitors are most widely used. In this study, the effects of inorganic nitrite (lithium nitrite) and amino acid corrosion inhibitors (diethanolamine, methyl diethanolamine, and 4-aminobutyric) on corrosion resistance and the pH of the solution with various concentrations of Na2SO4(0.89, 1.77 g/L) in saturated Ca(OH)2that contained NaCl (0.98 g/L), which simulated the concrete environment, were investigated. The corrosion resistance of inhibitors was evaluated by corrosion potential, electrochemical impedance spectroscopy, and potentiodynamic techniques. The results indicated improvement of corrosion resistance by the addition of amino acid corrosion inhibitors. It was confirmed that the inhibitor adsorbed on the surface of the specimen and passivated to reduce the corrosion reaction. In addition, the 4-aminobutyric acid corrosion inhibitors had the corrosion protection efficiency of 67.87–77.80%, which is a higher value than that of the inorganic nitrite corrosion inhibitor (lithium nitrite: 69.36–75.93%) and other amino acid corrosion inhibitors (diethanolamine: 35.69–39.91%; methyl diethanolamine: 66.07–69.09%).Keywords
Funding Information
- Ministry of Land, Infrastructure and Transport (18CTAP-C130223-02)
This publication has 30 references indexed in Scilit:
- Organic corrosion inhibitor of triethylenetetramine into chloride contamination concrete by eletro-injection methodConstruction and Building Materials, 2016
- Evaluation of corrosion resistance properties of N, N′-Dimethyl ethanolamine corrosion inhibitor in saturated Ca(OH)2 solution with different concentrations of chloride ions by electrochemical experimentsConstruction and Building Materials, 2016
- Corrosion – inhibiting properties of molybdenum-containing pigments in coatingsAnti-Corrosion Methods and Materials, 2015
- Effects of inorganic sealant and brief heat treatments on corrosion behavior of plasma sprayed Cr2O3–Al2O3 composite ceramic coatingsSurface and Coatings Technology, 2015
- Corrosion protection of steel with DMEA-based organic inhibitorConstruction and Building Materials, 2013
- The inhibition effects of several inhibitors on rebar in acidified concrete pore solutionConstruction and Building Materials, 2012
- Influence of pH on the nitrite corrosion inhibition of reinforcing steel in simulated concrete pore solutionCorrosion Science, 2011
- Impedance study on calcium nitrite as a penetrating corrosion inhibitor for steel in concreteElectrochimica Acta, 2011
- Calcium Nitrite Corrosion Inhibitor in Portland Cement: Influence of Nitrite on Chloride Binding and MineralogyJournal of the American Ceramic Society, 2011
- Carbon steel passivity examined in solutions with a low degree of carbonation: The effect of chloride and nitrite ionsMaterials Chemistry and Physics, 2009