Sang-Heon Shin
Research Subjects
Sang-Heon Shin has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Hwa-Sung Ryu
Hanyang Experiment and Consulting Co
9 shared publications Deuck-Mo Kim
Hanyang Experiment and Consulting Co
5 shared publications- Won-Jun Park
Department of Architectural Engineering, Kangwon National University, Samcheok 25913, Korea
4 shared publications - Deuck-Mo Kim
Hwarok Construction Industry, Hanyang University, Ansan 15588, Korea
2 shared publications - Han-Seung Lee
Department of Architectural Engineering, Hanyang University, Ansan, South Korea
2 shared publications Won-Jun Park
Kangwon National University
2 shared publications
Latest Publications
- 30 September 2020
- Published by Korean Institute of Information Scientists and Engineers in Journal of KIISE
- Vol. 47 (9) , 885-892
Realtime Video Streaming System over Narrowband Networks
본 논문은 불안정한 협대역 네트워크에서 높은 품질의 영상을 실시간 전송하기 위한 시스템을 제안한다. 제안한 시스템은 협대역에서 안정적인 데이터 전송을 제공하기 위해 순방향 오류정정 코드인 랩터 코드를 적용하였다. 랩터 코드의 매개변수(소스 심볼 크기, 소스 심볼 수, 코드율)를 네트워크 상황 및 송/수신 버퍼 상태에 따라 적응적으로 제어함으로써, 불안정한 협대역 네트워크에서도 높은 품질의 스트리밍 서비스를 제공한다. 제안하는 시스템은 실제 안드로이드 단말을 통해 실제 구현되었으며, 제안한 시스템은 불안정환 협대역 환경에서 높은 품질의 스트리밍 서비스를 제공하는 것을 검증하였다.
- 30 September 2020
- Published by Korean Institute of Information Scientists and Engineers in Journal of KIISE
- Vol. 47 (9) , 885-892
Realtime Video Streaming System over Narrowband Networks
본 논문은 불안정한 협대역 네트워크에서 높은 품질의 영상을 실시간 전송하기 위한 시스템을 제안한다. 제안한 시스템은 협대역에서 안정적인 데이터 전송을 제공하기 위해 순방향 오류정정 코드인 랩터 코드를 적용하였다. 랩터 코드의 매개변수(소스 심볼 크기, 소스 심볼 수, 코드율)를 네트워크 상황 및 송/수신 버퍼 상태에 따라 적응적으로 제어함으로써, 불안정한 협대역 네트워크에서도 높은 품질의 스트리밍 서비스를 제공한다. 제안하는 시스템은 실제 안드로이드 단말을 통해 실제 구현되었으며, 제안한 시스템은 불안정환 협대역 환경에서 높은 품질의 스트리밍 서비스를 제공하는 것을 검증하였다.
- Open Access
- 3 December 2019
- Published by MDPI AG in Sustainability
- Vol. 11 (23) , 6882
Properties of External Insulation Surface Preparation Mortar Using Expandable Graphite for Fire Resistance
In the case of fire, surface treatment agents used in external insulation finishing methods are substances that are vulnerable to fire. This study examined the incorporation and applicability of expandable graphite in surface preparation mortar so that heat transfer to the surface part can be suppressed even when the cementitious surface preparation mortar is thinly constructed in the external insulation method. Experimental results showed that the mechanical properties of surface preparation mortar were improved by using the fly ash and silica fume. Surface treatment materials using expanded graphite have a characteristic of expanding when a fire occurs. It was experimentally confirmed that incorporating expanded graphite can reduce the phenomenon of heat penetration to the rear surface when the surface preparation mortar is exposed to high temperatures such as a flame.
- 3 December 2019
- Published by MDPI AG in Sustainability
- Vol. 11 (23) , 6882
Open AccessProperties of External Insulation Surface Preparation Mortar Using Expandable Graphite for Fire Resistance
In the case of fire, surface treatment agents used in external insulation finishing methods are substances that are vulnerable to fire. This study examined the incorporation and applicability of expandable graphite in surface preparation mortar so that heat transfer to the surface part can be suppressed even when the cementitious surface preparation mortar is thinly constructed in the external insulation method. Experimental results showed that the mechanical properties of surface preparation mortar were improved by using the fly ash and silica fume. Surface treatment materials using expanded graphite have a characteristic of expanding when a fire occurs. It was experimentally confirmed that incorporating expanded graphite can reduce the phenomenon of heat penetration to the rear surface when the surface preparation mortar is exposed to high temperatures such as a flame.
- Open Access
- 15 April 2019
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2019, 1-11
Evaluation of Corrosion Resistance of Corrosion Inhibitors for Concrete Structures by Electrochemical Testing in Saturated Ca(OH)2Solutions with NaCl and Na2SO4
Reinforcing steel maintains passivity in an alkaline concrete environment. However, the passive film on the steel can be destroyed as the concrete becomes acidic, which could induce the corrosion of reinforcing steel. Carbonates and sulfates destroy the concrete matrix and accelerate the penetration of hazardous ions, thereby deteriorating the structure. To alleviate the corrosion of internal reinforcing steel within concrete, corrosion inhibitors are most widely used. In this study, the effects of inorganic nitrite (lithium nitrite) and amino acid corrosion inhibitors (diethanolamine, methyl diethanolamine, and 4-aminobutyric) on corrosion resistance and the pH of the solution with various concentrations of Na2SO4(0.89, 1.77 g/L) in saturated Ca(OH)2that contained NaCl (0.98 g/L), which simulated the concrete environment, were investigated. The corrosion resistance of inhibitors was evaluated by corrosion potential, electrochemical impedance spectroscopy, and potentiodynamic techniques. The results indicated improvement of corrosion resistance by the addition of amino acid corrosion inhibitors. It was confirmed that the inhibitor adsorbed on the surface of the specimen and passivated to reduce the corrosion reaction. In addition, the 4-aminobutyric acid corrosion inhibitors had the corrosion protection efficiency of 67.87–77.80%, which is a higher value than that of the inorganic nitrite corrosion inhibitor (lithium nitrite: 69.36–75.93%) and other amino acid corrosion inhibitors (diethanolamine: 35.69–39.91%; methyl diethanolamine: 66.07–69.09%).
- 15 April 2019
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2019, 1-11
Open AccessEvaluation of Corrosion Resistance of Corrosion Inhibitors for Concrete Structures by Electrochemical Testing in Saturated Ca(OH)2Solutions with NaCl and Na2SO4
Reinforcing steel maintains passivity in an alkaline concrete environment. However, the passive film on the steel can be destroyed as the concrete becomes acidic, which could induce the corrosion of reinforcing steel. Carbonates and sulfates destroy the concrete matrix and accelerate the penetration of hazardous ions, thereby deteriorating the structure. To alleviate the corrosion of internal reinforcing steel within concrete, corrosion inhibitors are most widely used. In this study, the effects of inorganic nitrite (lithium nitrite) and amino acid corrosion inhibitors (diethanolamine, methyl diethanolamine, and 4-aminobutyric) on corrosion resistance and the pH of the solution with various concentrations of Na2SO4(0.89, 1.77 g/L) in saturated Ca(OH)2that contained NaCl (0.98 g/L), which simulated the concrete environment, were investigated. The corrosion resistance of inhibitors was evaluated by corrosion potential, electrochemical impedance spectroscopy, and potentiodynamic techniques. The results indicated improvement of corrosion resistance by the addition of amino acid corrosion inhibitors. It was confirmed that the inhibitor adsorbed on the surface of the specimen and passivated to reduce the corrosion reaction. In addition, the 4-aminobutyric acid corrosion inhibitors had the corrosion protection efficiency of 67.87–77.80%, which is a higher value than that of the inorganic nitrite corrosion inhibitor (lithium nitrite: 69.36–75.93%) and other amino acid corrosion inhibitors (diethanolamine: 35.69–39.91%; methyl diethanolamine: 66.07–69.09%).
- Open Access
- 21 February 2018
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 12 (1) , 13
Steel-Corrosion Characteristics of an Environmental Inhibitor using Limestone Sludge and Acetic Acid
- 21 February 2018
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 12 (1) , 13
Open AccessSteel-Corrosion Characteristics of an Environmental Inhibitor using Limestone Sludge and Acetic Acid
- Open Access
- 21 February 2018
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 12 (1) , 19
Evaluation on the Surface Modification of Recycled Fine Aggregates in Aqueous H2SiF6 Solution
- 21 February 2018
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 12 (1) , 19
Open AccessEvaluation on the Surface Modification of Recycled Fine Aggregates in Aqueous H2SiF6 Solution
- Open Access
- 1 January 2018
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2018 (1)
Properties of Ready Mixed Acrylic Paste for Exterior Insulation Using Pozzolanic Materials and Atomizing Slag
Ready mixed acrylic paste (RMAP) is a material used in exterior insulation systems of buildings; it consists of liquids and aggregates. However, it is considerably difficult to use an admixture to control the physical properties of the RMAP owing to problems associated with strength and workability. Thus, to improve the properties of RMAP, this study evaluates the properties of a mortar produced with RMAP as well as pozzolanic materials and atomizing slag, which is a by‐product from the steelmaking industry. It was observed that if the density difference is large, a liquid RMAP may experience segregation. Through our experiments, we confirm that segregation resistance could be achieved even at 20% atomizing slag, which has a high density, by increasing the viscosity by approximately 1000 cP through the use of 10% fly ash and 3% metakaolin in the RMAP. Despite the increase in viscosity with the addition of the atomizing slag, the flow of the RMAP increased from 160 to 175 mm due to the spherical particle shape of the slag; in addition, the strength and water absorption coefficient also improved. In particular, the adhesion tension increased from 1.8 N/mm2 to 2.4 N/mm2 or higher.
- 1 January 2018
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2018 (1)
Open AccessProperties of Ready Mixed Acrylic Paste for Exterior Insulation Using Pozzolanic Materials and Atomizing Slag
Ready mixed acrylic paste (RMAP) is a material used in exterior insulation systems of buildings; it consists of liquids and aggregates. However, it is considerably difficult to use an admixture to control the physical properties of the RMAP owing to problems associated with strength and workability. Thus, to improve the properties of RMAP, this study evaluates the properties of a mortar produced with RMAP as well as pozzolanic materials and atomizing slag, which is a by‐product from the steelmaking industry. It was observed that if the density difference is large, a liquid RMAP may experience segregation. Through our experiments, we confirm that segregation resistance could be achieved even at 20% atomizing slag, which has a high density, by increasing the viscosity by approximately 1000 cP through the use of 10% fly ash and 3% metakaolin in the RMAP. Despite the increase in viscosity with the addition of the atomizing slag, the flow of the RMAP increased from 160 to 175 mm due to the spherical particle shape of the slag; in addition, the strength and water absorption coefficient also improved. In particular, the adhesion tension increased from 1.8 N/mm2 to 2.4 N/mm2 or higher.
- 20 August 2017
- Published by The Korean Institute of Building Construction in Journal of the Korea Institute of Building Construction
- Vol. 17 (4) , 321-329
Evaluation on Mechanical Properties of Organic of Fiber Reinforced Concrete Using Macro Forta Fiber
Evaluation on Mechanical Properties of Organic of Fiber Reinforced Concrete Using Macro Forta Fiber macro forta fber;fiber reinforced concrete;steel fiber;organic fiber;equivalent flexural strength; Concrete is a semi-brittle material, so its compressive strength is high but its tensile strength is low. The use of fiber-reinforced concrete to improve the disadvantages of such concrete can be an effective way to toughen effective toughness, and the performance is improved by using steel fiber reinforced concrete for structures that are vulnerable to bending forces. However, alternative materials are required due to corrosion of steel fiber and lowering of workability. The purpose of this study is to evaluate the availability of replacing steel fiber reinforced concrete by evaluating physical properties, mechanical properties and drying shrinkage properties of concrete using macro forta fiber with excellent diffusibility. Experimental results show that the macro forta fiber has better fluidity and mechanical performance than the steel fiber reinforced concrete. It was also confirmed that the crack resistance of concrete using Macro Forta fiber is effective in improving structural cracking and drying shrinkage resistance compared to steel fiber reinforced concrete.
- 20 August 2017
- Published by The Korean Institute of Building Construction in Journal of the Korea Institute of Building Construction
- Vol. 17 (4) , 321-329
Evaluation on Mechanical Properties of Organic of Fiber Reinforced Concrete Using Macro Forta Fiber
Evaluation on Mechanical Properties of Organic of Fiber Reinforced Concrete Using Macro Forta Fiber macro forta fber;fiber reinforced concrete;steel fiber;organic fiber;equivalent flexural strength; Concrete is a semi-brittle material, so its compressive strength is high but its tensile strength is low. The use of fiber-reinforced concrete to improve the disadvantages of such concrete can be an effective way to toughen effective toughness, and the performance is improved by using steel fiber reinforced concrete for structures that are vulnerable to bending forces. However, alternative materials are required due to corrosion of steel fiber and lowering of workability. The purpose of this study is to evaluate the availability of replacing steel fiber reinforced concrete by evaluating physical properties, mechanical properties and drying shrinkage properties of concrete using macro forta fiber with excellent diffusibility. Experimental results show that the macro forta fiber has better fluidity and mechanical performance than the steel fiber reinforced concrete. It was also confirmed that the crack resistance of concrete using Macro Forta fiber is effective in improving structural cracking and drying shrinkage resistance compared to steel fiber reinforced concrete.
- 20 August 2017
- Published by The Korean Institute of Building Construction in Journal of the Korea Institute of Building Construction
- Vol. 17 (4) , 349-360
An Experimental Study on the Performance and Field Application of Low Noise Beam-slab Formwork using Table Type Multi-stage Drop System
An Experimental Study on the Performance and Field Application of Low Noise Beam-slab Formwork using Table Type Multi-stage Drop System reinforced concrete structures;slab formwork;reducing noise;drop system; In concrete construction work, formwork is an important process that accounts for 10% of the total construction cost. Recent buildings are becoming bigger and higher. In order to maximize the efficiency and safety of this formwork, the system of formworking has been systematized. However, the human accidents and the noise complaints arise from dismantling processes frequently occur. In order to solve these problems, most of them are dependent on foreign technology, but they do not take into consideration the conditions of domestic construction site. In this study, we developed a table type multi-drop system form for a slab and beam which can improve the process, safety and reduction of disassembly noise, and evaluated the physical properties of the main members which are used in the system. The results of this study show that there is sufficient strength to be used as a slab and a laying material for both a yoke beam and a supporting post. The noise level is improved compared to existing method.
- 20 August 2017
- Published by The Korean Institute of Building Construction in Journal of the Korea Institute of Building Construction
- Vol. 17 (4) , 349-360
An Experimental Study on the Performance and Field Application of Low Noise Beam-slab Formwork using Table Type Multi-stage Drop System
An Experimental Study on the Performance and Field Application of Low Noise Beam-slab Formwork using Table Type Multi-stage Drop System reinforced concrete structures;slab formwork;reducing noise;drop system; In concrete construction work, formwork is an important process that accounts for 10% of the total construction cost. Recent buildings are becoming bigger and higher. In order to maximize the efficiency and safety of this formwork, the system of formworking has been systematized. However, the human accidents and the noise complaints arise from dismantling processes frequently occur. In order to solve these problems, most of them are dependent on foreign technology, but they do not take into consideration the conditions of domestic construction site. In this study, we developed a table type multi-drop system form for a slab and beam which can improve the process, safety and reduction of disassembly noise, and evaluated the physical properties of the main members which are used in the system. The results of this study show that there is sufficient strength to be used as a slab and a laying material for both a yoke beam and a supporting post. The noise level is improved compared to existing method.
- Open Access
- 1 January 2016
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2016, 1-9
Properties of Calcium Acetate Manufactured with Etching Waste Solution and Limestone Sludge as a Cementitious High-Early-Strength Admixture
Concrete is one of the most widely used construction materials. There are several methods available to improve its performance, with one of them being the use of high-early-strength admixtures (HESAs). Typical HESAs include calcium nitrate, calcium chloride, and calcium formate (CF). Industrial by-products, such as acetic acid and lime stone sludge (LSS), can be used together to produce calcium acetate (CA), which can subsequently be used as a cementitious HESA. In this study, calcium carbonate and LSS were mixed with cement in weight ratios of 1 : 1, 1 : 1.5, and 1 : 2, and the properties of the as-produced CA were evaluated. CA and CF were mixed with cement in different weight ratios (0, 1, 2, and 3 wt%) to obtain CA- and CF-mortars, respectively. The flow behavior, setting time, pH, and compressive strength of these mortars were evaluated, and their X-ray diffraction patterns were also analyzed. It was found that as the CF content in the CF-mortar increased, the initial strength of the mortar also increased. However, it impaired its long-term strength. On the other hand, when 1% CA was mixed with cement, satisfactory early and long-term strengths were achieved. Thus, CA, which is obtained from industrial by-products, can be an effective HESA.
- 1 January 2016
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2016, 1-9
Open AccessProperties of Calcium Acetate Manufactured with Etching Waste Solution and Limestone Sludge as a Cementitious High-Early-Strength Admixture
Concrete is one of the most widely used construction materials. There are several methods available to improve its performance, with one of them being the use of high-early-strength admixtures (HESAs). Typical HESAs include calcium nitrate, calcium chloride, and calcium formate (CF). Industrial by-products, such as acetic acid and lime stone sludge (LSS), can be used together to produce calcium acetate (CA), which can subsequently be used as a cementitious HESA. In this study, calcium carbonate and LSS were mixed with cement in weight ratios of 1 : 1, 1 : 1.5, and 1 : 2, and the properties of the as-produced CA were evaluated. CA and CF were mixed with cement in different weight ratios (0, 1, 2, and 3 wt%) to obtain CA- and CF-mortars, respectively. The flow behavior, setting time, pH, and compressive strength of these mortars were evaluated, and their X-ray diffraction patterns were also analyzed. It was found that as the CF content in the CF-mortar increased, the initial strength of the mortar also increased. However, it impaired its long-term strength. On the other hand, when 1% CA was mixed with cement, satisfactory early and long-term strengths were achieved. Thus, CA, which is obtained from industrial by-products, can be an effective HESA.