Effect of reduced graphene oxide on vulcanization of polydimethylsiloxane composites
Authors:
- 5 June 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (12) , 11390-11403
Abstract
This research aims to investigate the effect of reduced graphene oxide (rGO) on the kinetics of addition vulcanization in polydimethylsiloxane (PDMS) elastomers. For this purpose, the synthesis of graphene oxide (GO) and silane‐grafted GO followed by chemical reduction of particles was conducted to prepare rGOs with different surface chemistry. Particles were characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, x‐ray diffraction, scanning electron microscopy, and energy‐dispersive x‐ray analysis. Composites of PDMS containing these particles were prepared by solution mixing, and vulcanization of composites was investigated using differential scanning calorimetry. Results showed that the rate and degree of vulcanization reaction increase up to a critical concentration of particles and then decrease afterward. This behavior was attributed to the catalytic effect of chemical groups on the surface of rGOs, whereas the reverse behavior above the critical concentration was correlated to the immobilization of trapped rubber in the network of particles. Grafting graphene oxide by a long alkyl‐chain silane covered these chemical groups, suppressed the catalytic effect, improved the dispersion of particles, and shifted the critical concentration lower. The critical concentration was correlated to the electrical percolation threshold of particles and confirmed by the solvent swelling method. It was also shown that rGO can itself act as the catalyst for the vulcanization of PDMS with no need for platinum. As the dynamic‐mechanical‐thermal analysis showed, the PDMS composites containing 0.75 wt% of particles did not vulcanize properly. However, composites containing fewer particles were vulcanized.Highlights: Reduced graphene oxide affects additional vulcanization of PDMS. Below a critical loading, rGO accelerates vulcanization by a catalytic effect. Above critical loading, rGO decelerates vulcanization by a networking effect. Surface groups of rGO control catalytic and networking mechanisms. Silane modification of rGO affects interfacial behavior, thus critical loading.Keywords
This publication has 27 references indexed in Scilit:
- Vulcanization kinetics of styrene butadiene rubber reinforced by graphenic particlesSPE Polymers, 2021
- Electromechanical performance of polydimethylsiloxane containing reduced graphene oxide grafted by long-chain alkyl silaneJournal of Materials Science: Materials in Electronics, 2020
- Silane‐Modified Graphene Oxide as a Compatibilizer and Reinforcing Nanoparticle for Immiscible PP/PA BlendsPolymer Engineering & Science, 2019
- Covalent polymer functionalization of graphene for improved dielectric properties and thermal stability of epoxy compositesComposites Science and Technology, 2016
- Vulcanization kinetics of nano-silica filled styrene butadiene rubberPolymer, 2014
- Facile and safe graphene preparation on solution based platformJournal of Industrial and Engineering Chemistry, 2014
- Effect of carbon nanotubes with different lengths on mechanical and electrical properties of silica-filled styrene butadiene rubber compoundsJournal of Industrial and Engineering Chemistry, 2013
- Preparation and characterization of long-chain alkyl silane-functionalized graphene filmJournal of Materials Science, 2012
- Effect of carbon‐based nanoparticles on the cure characteristics and network structure of styrene–butadiene rubber vulcanizatePolymer International, 2012
- Influence of filler type and content on properties of styrene‐butadiene rubber (SBR) compound reinforced with carbon black or silicaPolymers for Advanced Technologies, 2004